Mirror Blanking Plate, Black, Ninja 400, (pair)
€40.69
Mirror Blanking Plate, Black, Ninja 400, (pair)
Handy mirror blanking plates for your Kawasaki Ninja 400
No need for ugly cable ties on those all important track days. These CNC
machined blanks will secure your cowling and keep you looking stylish.
2x Mirror Blanking plates and 4x stainless bolts are supplied, but you can
use your standard mirror mounting nuts to secure.
TYGA no: TYLY-1162
SKU: kaw-10101 Categories: ALL products, CNC parts, Kawasaki, Ninja 400R 2018-, Various partsTyga Step Kit Replacement Right Side Hanger, VTR1000 Sp2
€51.14
Tyga Step Kit Replacement Right Side Hanger, VTR1000 Sp2
Passenger seat cover Black/flad black, Honda MSX125 GROM
€187.90
Passenger Seat Cover, (GRP), MSX125 Grom.
This is the GRP version of our MSX125 passenger seat cowling in asteroid black with flat black number board as shown in the main photo. Easy installation, with mounting hardware and trim supplied, this stylish cover will clean up the lines of your bike and make your bike stand out from the crowd.
This seat cowling is also available as BPCX-7128 in carbon fibre. See website for more details.
<a href= {{media url= wysiwyg/02-fitting-manual-seat-cover-bpfx-cx-7128-online-72148956.pdf }} target= _self >Click here for PDF</a>
TYGA no: BPFX-7128 B/F
SKU: MSX-10147 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2013 - 2015, ShopCarb Service Kit A, 48 pieces, Honda VFR750R RC36 (94-97)
€81.92
Carb Service Kit A, 48 pieces, Honda VFR750R RC36 (94-97)
LiteTek Carburettor Seal Kit to suit: Honda VFR750R RC36 (1994-1997)
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
4x FB-013 Float Bowl Ring, Material: Flourosilicone (Part of Honda Kit No. 16010-MZ5-600 (16010-MZ5-920) Gasket Set A)
4x OR-005 Pilot Screw O-Ring, Material: Viton 70A (Part of Honda Kit No. 16010-MZ5-600 (16010-MZ5-920) Gasket Set A)
4x WS-001 Pilot Screw Washer, Material: Stainless Steel (Part of Honda No. 16016-MV9-730 Screw Set)
4x OR-009 Drain Screw O-Ring, Material: Viton 70A (Part of Honda Kit No. 16010-MZ5-600 (16010-MZ5-920) Gasket Set A)
4x OR-009 Air Cut Valve O-Ring, Material Viton 70A (Part of Honda Kit No. 16041-MZ5-600 Gasket Set C)
8x OR-023 Air Cut Valve O-Ring, Material Viton 70A (Part of Honda Kit No. 16041-MZ5-600 Gasket Set C)
4x OR-006 Needle O-Ring, Material: Viton 70A (Part of Honda Kit No. 16010-MZ5-600 (16010-MZ5-920) Gasket Set A)
4x OR-016 Fuel Tee O-Ring, Material: Viton 70A (Part of Honda Kit No. 16040-MZ5-600 Gasket Set B)
4x OR-024 Vacuum Breather O-Ring, Material: Viton 70A (Part of Honda Kit No. 16040-MZ5-600 Gasket Set B)
4x OR-011 Overflow O-Ring, Material: Viton 70A (Part of Honda Kit No. 16040-MZ5-600 Gasket Set B)
4x CS-004 Choke PLunger Cap, Material: HNBR (Part of Honda assembly 16046-MZ7-640)
TYGA no: CKA-Honda-VFR750R-RC36 (94-97)
SKU: alg-10347 Categories: ALL products, Carburettor Service Kits,, Honda, RC36-2 -> RC30 replica products, various parts, various parts, VFR750F Gen 4, 94-97Fly screen H2C black, Honda MSX125 2021
€55.41
Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-
Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.
See also BPFF-7142 for GRP version.
*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.
TYGA no: APK26PL64100ZA
SKU: msx-10473 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2021-, ShopHandle bar set racing “hinge type” black, KTM RC125/RC200/RC390 2022-
€247.11
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: TYLY-1531
SKU: ktm-10215 Categories: ALL products, CNC parts, Exhausts, KTM, RC390 2022-, Stock list, all modelsCarbon Front fender, Aprilia RS125 (2007-2010)
€208.08
This is a stock shaped fender for the 2007-2011 Aprilia RS-125 complete with mounting holes pre drilled for ease of fitment.
Weighs a fraction of the stock one at approx. 240g.
Let your bike stand out from the crowd with this beautiful carbon product
TYGA no: BPCF-7107
SKU: apr-10009 Categories: ALL products, Aprilia, Bodywork and carbon, Carbon, RS125, ShopLicense plate holder (Tyga), Aprilia RS250
€51.57
This product holds the registration/license plate for use with our Aprilia RS-250 GP style seat cowlings. It is supplied with a registration/license plate illumination light for countries where this is a legal requirement. We also offer the same product but using carbon, see BPCX-9130
TYGA no: BPFX-9130
SKU: apr-10073 Categories: ALL products, Aprilia, Bodykit replacement parts, Bodywork, RS250, Shop