Set, pipe full race system round stainless silencer LH exit, VFR750F gen 4, 94-97
€1,107.23
Set, pipe full race system round stainless silencer, VFR750F gen 4, 94-97
This TYGA Full Race System has been designed with no compromises and maximum power in mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits the 1994-1997 Generation 4 VFR750.
For unsurpassed looks, sound and performance, this system can be used with a number of our 2″ slip on exhaust silencers
See also our sets with silencer included:
EXPS-0122 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Carbon/Carbon End Cap Silencer
EXPS-0123 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Stainless Silencer
EXPS-0124 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Aluminium Silencer
EXPS-0125 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Carbon Silencer
EXPS-0126 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Carbon/Carbon End Cap Silencer
EXPS-0127 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Aluminium/Carbon End Cap Silencer
EXPS-0128 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless Silencer
EXPS-0129 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless/Carbon End Cap Silencer
EXPS-0130 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97 Maggot Silencer
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing in at only 4.15 kgs (not including the silencer).
**Important Note**
The TYGA system keeps the use of the side stand, however, the centre stand and pillion foot rests must be removed prior to installation.
TYGA no: EXPS-0128
SKU: hon-11021 Categories: ALL products, Exhaust systems, Exhaust systems, Exhausts, Honda, RC36-2 -> RC30 replica products, Shop, VFR750F Gen 4, 94-97Exhaust Chamber, Left, GP Type, Stainless, MC21
€350.30
Bare replacement, left side chamber for EXCS-0006A
CNC holder carbon shark fin, Ninja 400
€21.59
CNC Holder, Carbon Shark Fin, Ninja 400
TYGA no: BPSY-0220
SKU: kaw-10134 Categories: ALL products, Kawasaki, Ninja 400R 2018-, Various partsBig bore kit 300cc wiseco, NSR250 MC18/MC21/MC28
€2,264.37
This 300cc Big Bore Kit is identical to the TPER-0007 300cc Big Bore Kit, but the standard 300cc pistons are replaced with high performance options.
In this case we have forged Wiseco pistons that are lighter and stronger than stock. They use Wiseco rings, clips and pins.
See below for performance details for TPER-0007.
Bore & Stroke is 59mm x 54.5mm giving a total displacement of 298cc.
Parts included in the NSR300 kit.
Cylinder x 2 (includes head studs, RC valve, pulley & nut and washers)
Rear Head x 1
Front Head x 1
Piston x 2
Ring set x 2
Piston Pin x 2
Piston Clip x 4
S/E Bearing x 2
Head gasket x 2
Cylinder gasket x 2
RC Valve cables x 4
Water hose x 1
Exhaust Manifold x 2 (to fit TYGA pipes)
Other information:
There is no problem about the RC valves hitting the piston due to thin cylinder wall thickness. This is not an issue on our kit as it’s using different
cylinders, not modified NSR250. They are genuine OEM Honda cylinders, made and plated in Japan to their typical high quality.
The RC valves are easier to adjust than ever on the 300 kit, as there’s only one adjuster screw to play with, and each cylinder marked at the correct ‘fully open’ position for simple setting.
Exact Jetting requirements for your area and application cannot be provided due to differing atmospheric conditions around the world. However, following are some base settings to work from:
MC21 Std bottom end, Wire splice, TYGA Pipes, Airbox lid mod with filter.
Temp: 29 C
Press: 1015mb
Hum: 65%
Alt: 30m
MJ – #182/#185
JN – Std./Std.
SJ – #38/#38
AS – 1.5 turns out
PwrJ – Std./Std.
Tip: Cooler temps, higher pressure and/or lower humidity require richer jetting. High altitude requires leaner settings. Starting off with rich settings will in the worse case foul a plug. Too lean a setting may destroy the engine.
This jet set-up is for guidance only. TYGA Performance cannot be held responsible for any engine damage incurred due to incorrect settings.
At present, this kit is available by special order. Each kit takes approx. four weeks to prepare.
TYGA no: TPER-3007Â
SKU: hon-10390 Categories: ALL products, High performance, High performance, High performance, High performance, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, ShopRear sprocket aluminium gold, Honda MSX125
€67.41
Upgrade your bike with TYGA Sprockets.
Designed and machined in house from super strong 7075 T6 aluminium, and then anodized in gold colour for superior corrosion and abrasion resistance.
TYGA no: TYSR-0302-33TG - TYSR-0302-37TG
SKU: MSX-10087 - MSX-10091 Categories: ALL products, By product, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, Sprockets, Sprockets, SprocketsCarbon clutch cover, Honda NSR250 MC21/MC28 SE/SP
€116.83
Carbon cover to replace the nasty green plastic stock one on the NSR engines with dry clutch.
Beautiful, perfect fitment and give your bike that HRC look
TYGA no: BPCC-9006
SKU: hon-10255 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, NSR250 MC21, NSR250 MC28, Shop, Various parts, Various partsPro-arm Hub spacer 2mm
€17.91
Pro-Arm Hub Spacer, 2mm
TYGA no: TPER-0014-2
SKU: hon-10687 Categories: ALL products, By model, By product, CNC parts, Honda, RS250R NF5 / NX5, Shop, Various partsSeat cowling GP-T assy, Honda VFR400/RVF400
€437.04
Seat Cowling, (GRP), NC30/NC35 GP-T
This product is the latest TYGA design for the 400 V4 and is designed to be stylish and lightweight. This product includes ONLY the seat cowling for replacement in the event of an accident or can be used for a project bike of another model. For the MC21, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessay parts to complete the modification. For installation of any other model the customer will need to make the necessary modifications,
BPFS-0148 (GRP, NC30)
BPFS-0149 (GRP, NC35)
BPFS-0150 (Carbon, NC30)
BPFS-0151 (Carbon, NC35)
The advantages of this seat cowling over stock include:
– use with rest of seat cowling kit, much lighter than stock
– new design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9133).
– higher at the rear, to give the bike a more agressive stance
– better rider control by use of enclosed seat area
– improved strength with precision in design and fitment
Tyga Performance Compatible Parts for this Product:
This product is compatible with:
BPFX-9034 and BPCX-9134 Undertray, NC30/NC35 GP-T
TYLY-0133 Subframe, NC30/NC35 GP-T
TYLY-0130 Batterybox NC30/35 GP-T
BPFX-9234 Seat Support, NC30/NC35 GP-T
BPSP-0006 Seat Pad, GP-T
BPAC-0001 Rear Brake Reservoir Kit,
BPLT-0009 LED Taillight
BPFX-9133 Registration Plate Holder GP-T
TYGA no: BPFT-9034
SKU: hon-10597 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, RVF400RR NC35, VFR400RR NC30