Carbon lower cowling, Honda MSX125SF GROM
€523.53
Lower Cowling, (Carbon) MSX125SF, Grom, 2nd Gen 2016-2017
Lower Cowling, (Carbon), MSX125SF. Bling up your GROM with this cool component. High quality mounting hardware provided and easy to install.
This Lower Cowling is also available as BPFL-7428 in GRP ( unpainted and painted in Honda OEM colours to match your bike)
TYGA no: BPCL-7428
SKU: MSX-10386 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, MSX125 GROM, MSX125SF 2016 -2020Carbon dash TYGA,, Aprilia RS250
€33.12
This carbon dash is made specifically for the TYGA bodywork kits (BPFS-0100 and BPFS-0101). Adds finishing touch to the fairing and hides wiring harness
Not suitable for the stock bodywork, see BPCX-9330.
TYGA no: BPCX-9230
SKU: apr-10074 Categories: ALL products, Aprilia, Bodykit replacement parts, Carbon, RS250, ShopSet pipe, Full race with round stainless silencer NEW, Kawasaki ZXR250 2013 –
€557.94
2013-2017, Set, Pipe, Full Race System, Ninja 250R, Round Stainless Silencer
We now have a new and improved design to give you the edge in this highly competitive class. Through our continuous R&D, we have enhanced the dimensions of components to squeeze even more power from the Ninja 250 when used with the TYGA system*. Made in stainless steel with spring mounted round Stainless silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! Unlike the stock system and most other aftermarket full systems, the TYGA Performance full race system is routed up the right side of the bike for the best possible gas flow and the performance figures support this. Please see below.
(* May not comply with noise regulations for some states and territories and may exceed noise regulations for some circuits)
This system is supplied with an round Stainless silencer EXSL-0064
Note, this exhaust system is not suitable for the 2008-12 model. For the 2008-12 model, please see EXPS-0018.
* Please also note that all TYGA-Performance pipe sections and silencers are new for 2017 and thus not compatible with previous 2013-2016 TYGA-Performance Ninja 250 Exhaust pipe sections and silencers.
TYGA no: EXPS-0079
SKU: kaw-10062 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R/300R 2013 -Kit, Fairing Set (GRP), Honda NX5 RS250R (ram air)
€908.45
Kit, Fairing Set (GRP), Honda NX5 RS250R
Complete Bodywork kit which consists of the following products:
Upper Cowling Race, (GRP) NX5 RS250R (BPFU-9036)
The upper fairing is modelled off the last version of the NX5 RS250R but will fit any NX5 which has the ram air through the fuel tank system. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with lower cowling BPFL-9036.
Lower Cowling, (GRP) NX5 RS250R (BPFL-9036)
The lower fairing is modelled off the ram air version of the NX5 RS250R but will fit any NX5 which uses a stock upper as far as we can tell. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with upper cowling BPFU-9036
Seat Cowling Race (GRP) NX5 RS250R (BPFT-9036)
Although the late model stock shape NX5 RS250R works well, to our eyes it is a bit lacking in lines and we prefer the 1995 factory NSR racer look as ridden by Ukawa and Okada. We therefore decided to make a similar style seat cowling which would be a direct fit for the NX5. The seat uses a lightweight aluminium stay to relocate the rear mounting bolts from the sides to the seat pad area and is covered underneath for streamlining and protection of the PGM and connectors. It is easy to install and being made from high quality epoxy resins and top quality glass fabric is strong and crash resistant.
Seat Stay NX5 RS250R (BPSY-0213)
Screen Clear NX5 RS250R (SCRE-0168)
TYGA no: BPFS-0172
SKU: hon-10904 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopTyga Step Kit Replacement Right Side Hanger, (Adj.) CBR250R/CBR300R Assy.
€65.91
Tyga Step Kit Replacement Right Side Hanger, (Adj.) CBR250R/CBR300R Assy.
Replacement right hanger for your TYGA Step Kit. Complete with mounting bolts. Note this is for the adjustable type. See STAH-0018 for non adjustable fixed type.
Silencer aluminium round /carbon end cap 380mm (4 stroke) 2
€271.40
Silencer, Aluminium/Carbon End Cap, Round, 2 x 380 mm., Assy.
This silencer has a tough anodized aluminium tube and carbon exit cap for a lightweight and attractive finish. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
The ‘slip-on’ mount is designed to fit any system with a 2 external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe. A silencer mounting clamp is also provided to secure the silencer to the bike.
Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.
Compatible with TYGA and other systems which use a 2 inch external diameter tail pipe, this silencer uses a 4 inch x 380 mm. outside aluminium tube.
TYGA no: EXSL-0140
SKU: alg-10136 Categories: 4 stroke exhaust sets, ALL products, exhaust system replacement parts, Exhaust systems, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, Silencers, VFR400RR NC30, VFR750F Gen 4, 94-97Carbon rear hugger, Yamaha V-max
€236.91
Carbon rear hugger Yamaha, direct replacement from stock fender.
Weight approx. 0.355 kg
Set, Pipe, Twin Exit System, High Level, MSX125 2021-, Stainless Oval/Carbon End Cap
€866.32
Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-
Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.
See also BPFF-7142 for GRP version.
*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.