Clampingplate ram airbox, Honda RS250 NX5
€10.91
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
TYGA no: BPSY-0221A
SKU: hon-11381 Categories: ALL products, High performance, Honda, RS250R NF5 / NX5, Various partsStay, Comp, Upper Cowling, Ninja 250R 2008 -12
€114.70
Stay, Comp, Upper Cowling, Ninja 250R 2008 -12
TYGA no: 39137-0058-18R
SKU: kaw-10205 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopSeat cowling (GRP), stock shape, NXA RS250R (2001- ’08)
€362.73
VHM cylinder head (2 pieces), Honda RS250 (alg-10174)
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design
This head set comes with following parts:
2x cylinder head
2x standard insert (12.0cc)
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
Bracket rear brake CNC silver 84mm Brembo, Honda NSR250 MC28
€110.40
Bracket, Rear Brake, 84mm Brembo Conversion, Silver, MC28 and NC35. Consists of main caliper bracket and spacer for the rear disc brake to get the correct clearance.
This is to fit the 84mm pitch rear caliper.
Also available in black (TYLY-1089)
Applicable with the following Brembo model calipers:
Rear caliper P2
Code 20.6951.46
and
Rear CNC caliper P2
Code XA7.29B0
TYGA no: TYLY-0089Â
SKU: hon-10431 Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC28, RVF400RR NC35, ShopClutch Pressure Plate, MC28 R
€38.29
Clutch Pressure Plate, MC28 R
TYGA no: 22351-KV3-000
SKU: hon-11152 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR250, NSR250 MC28Crankshaft Bearing, C , NSR250 MC21/28
€213.11
Crankshaft Bearing, Left, NSR250 MC21/28
Genuine OEM KOYO main crankshaft bearing for your Honda NSR250 MC21/28.
See also TYPP-0012SET for set consisting of one each of the left, centre and right crank bearings.
TYGA no: TYPP-0012C
SKU: hon-10759 Categories: ALL products, Honda, NSR250, NSR250 MC21, NSR250 MC28, Various parts, Various partsBrake lever TYGA CNC flip up , KTM Duke – RC125/RC200/RC390
€54.27
Brake lever TYGA CNC flip up , KTM Duke – RC125/RC200/RC390
CNC machined from solid billet, these flip up type levers are made to a very high standard.
Not to much bling, and the orange color matches your KTM RC series good quality and adjustable in reach and length.
Fits’s in minutes and changes the appearance of your KTM!
Racing stepkit silver/SILVER adjustable, Honda Monkey 2018
€477.27 €395.87
Racing Rear Set Kit, Adjustable, Monkey 125
With all major components designed specifically for the Monkey 125 in mind, this rear set kit is the best on the market. Designed in-house by TYGA Performance using the latest CAD/CAM software, these tough CNC machine-made step kits are made from top quality, aircraft grade aluminium and utilise TYGA’s unique and elegant system to provide ten different foot peg positions. The kit features levers moving on ball bearings to give precise and smooth movement. In addition to the technical specifications, emphasis has also been given to make the steps as uncluttered as possible with the rear master cylinder hidden from view and no unsightly unused holes on view etc. The kit comes complete, ready to bolt on with stainless steel fasteners, new OEM Honda axle bolt and carbon heel guards. With individualism in mind, there is a choice of ten colour combinations available and all components are available as replacement or separate items.
Notes:
No real brake light provision. If required, we recommend installation of inline pressure switch.
Fitting this rear set requires replacing the axle bolt with a slightly longer one, a new orginal OEM honda axle bolt is included
This rear set cannot be used in a reverse (GP) shift pattern
TYGA no: STAA-0027SILVER
SKU: msx-10424 Categories: ALL products, CNC parts, Honda, Monkey 125 2018-, Shop