Rubber ram airbox, Honda RS250 NX5
€9.13
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
TYGA no: BPSY-0221B
SKU: hon-11382 Categories: ALL products, High performance, Honda, RS250R NF5 / NX5, Various partsInner cowling GRP stock “painted Red” , NSR250 MC21/MC28
€156.17
Power Jet #0, for NSR250 MC18/21/28. Replica part to replace HRC part: 99106-NKD-970
Use this jet to blank of the power jet circuit in NSR250 carbs.
TYGA no: BPFC-0040RED
SKU: hon-11362 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, High performance, Honda, New OEM Honda parts, New OEM Honda parts, NSR250 MC21, NSR250 MC28, ShopFront Fork Preload Adjusters black/red (Pair), Honda MSX125 GROM
€172.49
Front Fork Preload Adjusters, Pair, MSX125 Grom, Black/Red
These fully functional preload adjusters replace the blank end caps on the stock MSX125 Grom front suspension. It is generally acknowledged that the MSX125 is a bit soft on the front and these caps allow the rider to increase (or reduce) the amount of preload on the internal springs, which in turn, effectively increases or reduces the stiffness of the front forks allowing for a better set up for your riding style or conditions.
These adjusters allow you and extra 6mm of preload from standard.
Supplied in black and gold anodised finish, (see TYLY-0097 and TYLY-1097 for other colour versions too) these adjusters are as beautiful as they are functional.
TYGA no: TYLY-2097
SKU: MSX-10135 Categories: ALL products, Honda, MSX125 2013 - 2015, Shop, Various partsTop end rebuild set Cylinder C, Honda NSR250 MC21/MC28
€293.88
The picture shows everything you need to do a top end rebuild on your MC21/28. One kit includes all parts for one cylinder (cylinder ‘C’). To overhaul both cylinders please order 2 kits.
Honda OEM:
1x Gasket cylinder 12192-KV3-680
1x Gasket head 12251-KV3-830
1x Piston ring 13010-KV3-305
1x Piston D mark 13102-KV3-830
1x Piston pin 13111-KV3-771
1x RC valve shaft E clip 90601-KV3-000
1x Bearing piston 91102-KV3-771
1x Seal, RC valve shaft 91201-PA9-004
2x Dowel cylinder 94301-10160
2x Piston Circlip 15mm 94601-15000
There are different kits depending on the piston supplied and the pistons are sized to match the cylinder. The cylinders have a letter stamped on them. A cylinder = B piston B cylinder = no mark piston, C cylinder = D piston. The largest cylinder bore is A and the smallest is C. However, note that this is only for when cylinders are new or in good condition, so if the cylinder is worn, the corresponding piston will be a looser so a bigger piston might be advised. If the cross hatch honing of the cylinder is very feint then we suggest using the next size up piston. The differences in sizes are tiny (11 microns between largest and smallest) and for the most part not an issue so it is not a problem if a smaller piston is used in a larger cylinder or the other way round.
Cylinder A = 54.008mm – 54.011mm use Piston B = 53.966mm – 53.969mm
Cylinder B = 54.004mm – 54.008mm use Piston # = 53.962mm – 53.965mm
Cylinder C = 54.000mm – 54.004mm use Piston D = 53.958mm – 53.961mm
Piston to bore clearance = 0.039mm – 0.045mm
TYGA no: NHPS-0001C
SKU: hon-10441 Categories: ALL products, High performance, High performance, High performance, Honda, NSR250 MC21, NSR250 MC28, ShopCarbon Number board miniRacerXtreme, Honda MSX125 GROM
€65.29
Number Board, (Carbon) MiniRacerXtreme, MSX125 Grom
This product fits over the front of the fairing on the MiniRacerXtreme to tranform the fairing from street to race. Easy installation and can be used with or wothout the headlight installed.
Seat set street T13, Honda RVF400 NC35
€919.75
This set of bodywork is designed to replace the NC35 stock seat cowling with GRP version of our T13 seat cowling and includes all parts needed to do the conversion. This product has a roomier riding position and enhanced modern looks over the stock seat cowling.
This product is suitable for the NC35 and is the base version without carbon fiber front section to keep the cost to a minimum. We also offer a deluxe version of the same product with carbon front section for enhanced looks and strength, see also BPFS-0118.
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
Take a look at our Project bikes page, to see the actual product on a bike or just to get some ideas.
TYGA no: BPFS-0117
SKU: hon-10313 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, ShopComplete Bodykit set Type 9 Black, Honda MSX125 GROM
€329.98
Complete Bodywork Set, MSX125, 2015 Type 9 Asteroid Black Metallic Scheme. Transform your bike! Easy and fun to install. With this product, you can afford to have a change of clothes for your beloved MSX125/Grom. Suitable for all models from 2013-2015
This set comprises of a complete set of all the OE Honda panels and decals shown in the photos below for the MSX125. Note it includes the decal ‘MSX125’ not ‘Grom’ as used in some markets. These are all genuine Honda products and not nasty Chinese knockoffs!
TYGA no: BPFS-7028X
SKU: MSX-10313 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopRacing stepkit silver/BLACK adjustable, Honda MSX125 GROM
€477.27 €395.87
Racing Rear Set Kit, Adjustable, silver with BLACK Slot Cover, MSX125 Grom
With all major components desgined specifically for the MSX125 Grom in mind, this rear set kit is the best on the market. Designed in-house by TYGA Performance using the latest CAD/CAM software, these tough CNC machine-made step kits are made from top quality, aircraft grade aluminium and utilise TYGA’s unique and elegant system to provide ten different foot peg positions. The kit features levers moving on ball bearings to give precise and smooth movement. In addition to the technical specifications, emphasis has also been given to make the steps as uncluttered as possible with the rear master cylinder hidden from view and no unsightly unused holes on view etc. The kit comes complete, ready to bolt on with stainless steel fasteners and carbon heel guards. With individualism in mind, there is a choice of ten colour combinations available and all components are available as replacement or separate items. Be sure to order the correct colour combination. Some photos below are for reference and show different colours to this product.
Note, no real brake light provision. If required, we recommend installation of inline pressure switch.
You can only use these steps on the MSX125SF if you have a TYGA exhaust
<a href= {{media url= wysiwyg/05-fitting-msx-step-kit-online-6e1bce74.pdf }} target= _self >Click here for fitting instructions</a>
TYGA no: STAA-0019BLACK
SKU: MSX-10243 Categories: ALL products, CNC parts, Honda, MSX125 2013 - 2015, MSX125 2021-, MSX125SF 2016 -2020, Shop, Steps, Steps