Seat set street GRP GP-T, Honda VFR400 NC30
€1,096.34
The ultimate seat set for your V4 Honda!
This modern fairing, designed in-house by TYGA Performance, is the culmination of 15 years of experience developing bodywork for the NC35. As well as bringing the NC30 up to date, it also offers huge weight saving and easy fitment and removal. The seating position is higher and roomier compared to the stock NC30 postition, bringing it into line with modern sports bikes ergonomics. The seat pad is designed to give plenty of feedback for race use and the cowling has plenty of space for tucking in behind the fairing along the straights. The seat cowling is designed so that the fuel tank can be removed while leaving the seat cowling installed, allowing for quick jetting changes etc.
The kit is supplied with all mounting hardware including subframe and battery box. The taillight used in this kit, is LED and may not comply with road use regulations in some territories,( though we have not heard of any issues after selling them worldwide for ten years).
Like all our fairings, this product uses only the best epoxy resins and high quality fabrics to give a strong, light and flexible panel. All our products are hand made by our skilled craftsmen and are built to a very high standard.
As well as this seat cowlng set BPFS-0149 which is made using GRP (glass reinforced plastic) which is primed and ready for paint
** we offer a similar product using carbon fiber panels finished in high gloss UV protective clearcoat. See BPFS-0151
** We recommend trial fitting and making and minor adjustments before painting
TYGA no: BPFS-0148
SKU: hon-10583 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, VFR400RR NC30CDI Zeeltronic VJ23 + PC Programming Cable
€453.72
Hi-Flo Snorkel, Air Box, RGV250 VJ23
This Hi-Flo Snorkel is dyno developed in-house by TYGA Performance to eliminate the restriction of the standard VJ23 air box snorkel.
The RGV250 VJ23 has it’s true potential restricted in three main areas; Exhausts, CDI and of course the standard air box snorkel.
While just replacing the snorkel will obviously have a small benefit, it is best used in conjunction with our other VJ23 power up parts.
Available in Black/Red and All Black please choose your preferred colour in the options below.
Please see TPER-0082 for all the parts you need to build the ultimate VJ23 street weapon!
This is a 3D printed product using tough and durable materials. Some surface imperfections may be visible, but this in no way affects the fit or performance of the product.
We have 2 color option, Red/black and all black.
please specify in comment box at checkout what color you want.
Set full race system with stainless silencers with carbon cap, Kawazaki Z125 2016-
€536.29
Set, Pipe, Full Race System, Kawa Z125, Stainless Oval/Carbon End Cap
This full race system has been specifically designed for the Z125 to maximise performance and looks. The header section has a special bulge to reduce the sound level, without sacrificing power. Complete with Lambda boss for 100% compatability with the stock electronics.
The final silencer is constructed using a stainless steel sleeve with a carbon exit cap and a CNC machined aluminium entry cap for a high quality finish, This system increases performance, saves weight and enhances the looks of the bike. The system is supplied with a decbel killer for noise reduction.
Performance and Dynograph
The green trace shows the 100% standard Kawasaki Z125, compared to the red trace, which is after installing the TYGA Full System set (EXPS-0063)
A useful gain all through the range, with potential for other engine mods.
Kawasaki Z125 Sound Level Test
Test Method: SAE J2825 Static sound level test for motorcycles
Equipment: DIGICON IEC-651 TYPE II sound meter
RPM TYGA System – No DBK TYGA System – DBK Installed OEM System
Idle 82 73 69
4000 92 84 81
5000 93 85 86
6000 95 87 91
TYGA no: EXPS-0063
SKU: kaw-10055 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Shop, Z125 2016-Carbon Front fender, Aprilia RS250
€195.96
This is a stock shaped fender complete with mounting holes pre drilled for ease of fitment.
Fits both Aprilia RS250 models, but styled from the MK2 RS250.
Weighs a fraction of the stock one at approx. 250g
Update your bike with this great carbon product, direct replacement of the original part.
TYGA no: BPCF-9007
SKU: apr-10021 Categories: ALL products, Aprilia, Bodywork and carbon, Carbon, RS250, ShopCDI Zeeltronic Aprilia RS250
€319.00
Reed valve Gasket silicone (set), Aprilia RS250/Suzuki RGV250
The OEM reed blocks and manifolds have a build in rubber ring, what after 20 years isn’t perfect anymore.
We offer a simple but effective solution, no risk on damaging the engine.
And can be used multiple times.
1 engine = 1 set
Handle bar clamp pair ” hinge type” black, KTM RC390 2014 -25
€205.78
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: TYLY-1731
SKU: ktm-10214 Categories: ALL products, CNC parts, CNC parts, CNC parts, Exhausts, KTM, RC 125/200, RC 390, RC390 2022-, Stock list, all modelsSet, Pipe, Full Race System, High Level, MSX125 2021-, Moto Maggot
€451.95
Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-
Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.
See also BPFF-7142 for GRP version.
*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.
Set, Pipe, R.H Exit, Full Race System, Round Carbon/Carbon End Cap Silencer, VFR750F, 3rd Gen, 90-93
€1,396.31
Set, pipe full race system round carbon/carbon end cap silencer RH exit, VFR750F gen 4, 94-97
This TYGA Full Race System has been designed with no compromises and maximum power in mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits the 1994-1997 Generation 4 VFR750.
For unsurpassed looks, sound and performance, this system comes with the 450mm Round Auluminium Silencer but can be used with a number of our 2″ slip on exhaust silencers
See also our other sets with silencer included:
EXPS-0132 Set, Pipe, R.H Exit, Full Race System, Round Aluminium Silencer
EXPS-0133 Set, Pipe, R.H Exit, Full Race System, Round Carbon/Carbon End Cap Silencer
EXPS-0135 Set, Pipe, R.H Exit, Full Race System, Round Carbon Silencer
EXPS-0136 Set, Pipe, R.H Exit, Full Race System, Oval Stainless Silencer
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing in at only 4.15 kgs (not including the silencer).
**Important Note**
The TYGA system keeps the use of the side stand and pillion foot rests however, the centre stand must be removed prior to installation.
TYGA no: EXPS-0155
SKU: hon-11325 Categories: ALL products, Exhausts, Honda, Shop, VFR750F Gen 3 90-93