Tyga Step Kit Replacement Bush, (Pair), 20mm
€12.44
This replacement part fits to the Tyga step kit on the KTM RC390 etc.
TYGA no: STHB-0020
SKU: ktm-10124 Categories: ALL products, CNC parts, CNC parts, CNC parts, KTM, RC 125/200, RC 390, RC390 2022-, Stock list, all modelsFront wheel spacer kit aluminium, Suzuki RGV250
€33.23
Replace the heavy steel front wheel spacer and wheel bearing distance spacer on the VJ22 with these lightweight 6061-T6 aluminium spacers. At 35% of the weight of standard they’re just what you need for easier wheelies!
TYGA no: TPER-0053
SKU: suz-10084 Categories: ALL products, CNC parts, CNC parts, RGV250 VJ22, Shop, SuzukiTriple clamp set CNC black, Honda VFR400 -> RVF400 fork
€673.59
Triple Clamp Set, CNC Black, RVF400 forks to fit VFR400R, NC30
CNC machined TYGA lower triple clamp for the VFR400R NC30 to fit RVF400/NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-1644
SKU: hon-10619 Categories: ALL products, CNC parts, CNC parts, Honda, Shop, VFR400RR NC30Fairing set street GP-T, Honda NSR250 MC21/MC28
€1,113.54
Kit, Fairing Set, GRP, (Street), NSR250 GP-T
This modern fairing, designed in-house by TYGA Performance, is the culmination of 15 years of experience developing bodywork for the NSR250. As well as bringing the NSR250 up to date, it also offers huge weight saving and easy fitment and removal. Similar to a GP bike, the fairing is held on by R clips and nylon bungs for quick release. The kit is supplied with all mounting hardware including carbon fiber side stays and aluminium upper and front stays. The headlights used in this kit, are LED and consist of two units either side with 2 on low and 4 on high beam. The system uses a lot less current than conventional halogen systems while at the same time being discrete but stylish. Please note that the headlights do not comply with road use regulations and are unsuitable for high speed riding on unlit roads.
Like all our fairings, this product uses only the best epoxy resins and high quality fabrics to give a strong, light and flexible panel. All our products are hand made by our skilled craftsmen and are built to a very high standard.
As well as this fairing BPFS-0137 which is made using GRP (glass reinforced plastic) which is primed and ready for paint**, we offer a similar product using carbon fiber panels finished in high gloss UV protective clearcoat. See BPFS-0138
* A clear screen is provided unless you specify tinted in the comment box at check out.
** We recommend trial fitting and making and minor adjustments before painting
TYGA no: BPFS-0137
SKU: hon-10531 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC21, NSR250 MC28, ShopUpper Cowling Race, (GRP) NX5 RS250R (late model style)
€318.90
Upper Cowling (GRP), NX5 RS250R.
This upper fairing is modelled off the last version of the NX5 RS250R but will fit any NX5 which has the ram air through the fuel tank system. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with lower cowling BPFL-9036
Requires screen SCRE-0168
TYGA no: BPFU-9036
SKU: hon-10908 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopCarbon rear hugger, Honda CBR600 2005-16
€142.48
Direct replacement for the nasty plastic hugger. Weighs a fraction of the original and makes your bike stand out from the crowd.
Please note TYGA logos are applied over the clearcoat and can easily be removed.
TYGA no: BPCH-7206
SKU: hon-10011 Categories: ALL products, Carbon, CBR600RR 2005- 6, CBR600RR 2007- 16, Honda, ShopSection final stainless, Kawasaki ZXR400L
€245.52
Section Final, Stainless, ZXR400L
Final section, used on TYGA-Performance Kawasaki ZXR400L Exhaust Systems:
EXPS-0137
EXPS-0138
EXPS-0139
EXPS-0140
Set, mirror blanking plates L&R CNC silver, KTM RC series
€57.41
Wheel, Aluminium Spacer Kit, KTM Duke – RC Series
Update your bike with this great TYGA performance, KTM power part!!
This comprehensive kit is specifically designed for the KTM racer in mind. The wheel spacers have been cleverly designed to be captured in the seals (instead of being loose as they are with stock set up), enabling quick and easy wheel removal and installation; essential when every minute counts to get out in time for a session or race.
In addition, the spacers are all made out of high quality aluminium (6061-T6) instead of steel giving a useful saving of 65% in important unsprung weight.
Finally, we provide a complete set of high quality Japanese Koyo wheel bearings to replace the not so good ones supplied from the factory.
All in all, a useful and inexpensive upgrade. Now you really are ready to race!
Included in this kit are the following components:
Bearings
front wheel x 2
rear wheel x 2
sprocket carrier x 2
seals
front wheel x 2
rear wheel x 2
spacers
front wheel, left, right and centre
rear wheel, left, right, centre and sprocket carrier
Note: This product is only sold as a complete kit, and individual items are not available separately, sorry.
TYGA no: TYLY-0185
SKU: ktm-10192 Categories: ALL products, CNC parts, CNC parts, CNC parts, Duke 390 2017 -, KTM, RC 125/200, RC 390, Shop, Various parts