Rear Brake Light Switch Kit
€13.49
Rear Brake Light Switch Kit. Please specify the model you will be using this on because the spring length varies.
Note you will need to drill and tap a hole in the underside of the rear brake lever, if it has not already been done, in order to install this kit.
Carbon chain guard, Kawasaki ZX10R 2011-13
€123.76
High quality carbon products, perfect fitment and easy to install. Gives your bike that SBK look
Lightweight carbon fibre direct replacement for Kawasaki OEM item. Predrilled for use with stock mounting hardware.
(TYGA logo is applied after clearcoat and can be eaily removed)
CDI Zeeltronic Suzuki RGV20 VJ22
€319.00
Reed valve Gasket silicone (set), Aprilia RS250/Suzuki RGV250
The OEM reed blocks and manifolds have a build in rubber ring, what after 20 years isn’t perfect anymore.
We offer a simple but effective solution, no risk on damaging the engine.
And can be used multiple times.
1 engine = 1 set
Cover headlight upper cowling (pair) yellow, Honda VFR400 – RVF400
€27.34
Cover, (yellow), pair, Headlight, Upper Cowling, Endurance
To be used on the TYGA Endurance Fairings for NC30/35
TYGA no: SCRE-9011
SKU: hon-10644 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, VFR400RR NC30Triple clamp set CNC black, Honda RVF400 -> CBR600 fork
€673.59
Triple Clamp Set, CNC Black, CBR600RR Forks to fit NC35
CNC machined TYGA lower triple clamp for the NC35 RVF400 to take 53 mm diameter CBR600RR forks. (For later model CBR600RR which use 54 mm forks, we can supply by special order so please send us an email or put a comment with your or der that you need 54 mm and not the default 53mm.)
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-1742
SKU: hon-10555 Categories: ALL products, CNC parts, CNC parts, Honda, RVF400RR NC35, ShopTriple Clamp Set, 3D, CNC Silver, CBR600RR to fit MC21/MC28
€673.59
CNC machined TYGA triple clamp set for your NSR250 MC28.
These stylish, all aluminium triple clamps are a direct replacement for the MC28 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!
They are delivered ready to fit with all necessary bearings and bottom seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ key holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-3307
SKU: hon-11252 Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, NSR250, NSR250 MC28, Stock list, all modelskey holder CNC silver, Honda NSR250 MC18/MC21/MC28
€121.39
Ignition Switch Holder, CNC Silver, NSR250
This is a removable ignition switch/lock holder for our NSR triple clamp. Can be ordered as part of a triple clamp set or by itself or to fit to our TYGA triple clamps TYLY-0041 and TYLY-1041
TYGA no: TYLY-0141Â
SKU: hon-10268 Categories: ALL products, By model, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC18, NSR250 MC21, ShopSection, Collector 1-2, KTM RC390 Serpent
€61.37
Section, Collector 1-2, KTM RC390 Serpent
TYGA no: EXPT-0053
SKU: ktm-10116 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all models