Carbon front fender stock shape, Honda NC23,NC29,NC30
€193.87
Front Fender, Carbon, NC23,NC29, NC30, Stock Shape
Real Carbon fibre reproduction of the stock OEM Honda front fender. Finished in high gloss, adds beauty and reduces unsprung weight. (weight of part approx. 0.2 kg)
TYGA no: BPCF-0005
SKU: hon-11224 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, By model, CBR400RR NC23, CBR400RR NC29, Hawk/Bros 400/650, Honda, Shop, VFR400RR NC30Undertray street GRP GP-T, Honda NSR250 MC21/MC28
€75.27
Undertray, Street, (GRP), NSR250 GP-T
This product is to be used with BPFT-9033, BPFT-9133, BPCT-9033 and BPCT-9133 seat cowlings
Also to be used with BPFX-9133 Registration Plate Holder GP-T.
Note the following products are all compatible with the above seat cowlings and are interchangable between the MC21 and MC28
BPFX-9033 Undertray Street GRP
BPCX-9033 Undertray Street Carbon
BPFX-9333 Undertray Race GRP
BPCX-9333 Undertray Race Carbon
TYGA no: BPFX-9033
SKU: hon-10469 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork and carbon, Bodywork and carbon, NSR250 MC21, NSR250 MC28, ShopCarbon front fender, Yamaha YZF-R125 2009-
€228.22
Front Fender (Carbon), Yamaha YZF-R125 2009-2013. Supplied with all mounting hardware made from high quality stainless steel as shown in the photo below
Triple clamp set CNC black, Honda NSR250 – CBR600 fork
€673.59
Triple Clamp Set, CNC Black, CBR600RR Forks to fit MC18
CNC machined TYGA lower triple clamp for the NSR250 MC18 (1988/1989) to take 53 mm diameter CBR600RR forks. (For later model CBR600RR which use 54 mm forks, we can supply by special order so please send us an email or put a comment with your order that you need 54 mm and not the default 53mm.)
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Note, we recommend using Handlebar set 48 mm. TYLY-0012 when installing this triple clamp set for best clearance issue with the NSR fairing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-1245
SKU: hon-10702 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250, NSR250 MC18, Stock list, all modelsCarbon front fender stock shape , Honda NSR125 JC22
€165.87
Real Carbon fibre reproduction of the stock OEM Honda front fender. Finished in high gloss, adds beauty and reduces unsprung weight. (weight of part approx. 0.2 kg)
TYGA no: BPCF-7035
SKU: hon-10479 Categories: ALL products, Carbon, Honda, NSR125 JC22 1994 - 2003, ShopHandle bar set, Honda RS250 NXA
€216.82
Handlebar Set, Silver, NXA
Design based on the genuine HRC bar clamps as used on the NXA. Made from 6061-T6 for strength and durability, ideal for replacements for your Honda RS250 or for building a special. Designed for 50mm/52mm clamping surface, with an angle of the bars set at 17° This is the same as stock HRC clamps and is more radical than the usual <10° which most of our other handle bar clamps are set at.
TYGA no: TYLY-0359
SKU: hon-11212 Categories: ALL products, CNC parts, CNC parts, Honda, RS250R NF5 / NX5, ShopFork cap kit, Kawasaki ZXR400L
€317.71
After 20 years or so of hard use, many ZXR’s have damaged or scruffy fork caps. We know that it can really detract from an otherwise well restored bike if the fork caps are scuffed or dinged up. We therefore decided to reproduce the fork caps both for our collection and to offer to the public at the same time. CNC machined from 7075 T6 aluminium and brass and with the clear anodizing, just like the original OEM parts, these fork caps are the finishing touch of any ZXR400 restoration and install exactly the same as the original parts.
The 3 legged Spring Adjuster Plate is not included in this kit. Please reuse the original part.
Carbon kit, Fairing Set, Honda NX5 1993 RS250R (early model style)
€2,267.12
Kit, Fairing Set (Carbon), Honda NX5 RS250R (1993 Style)
Complete Carbon Bodywork kit which consists of the following products:
Upper Cowling Race, (Carbon) NX5 RS250R (1993 Style) (BPFU-9236)
The carbon upper fairing is modelled from the first version of the NX5 which has the side air intake. We made it slightly different by smoothing the left side where there is normally a cut out near the steering damper but is otherwise stock shaped.
To be used with carbon lower cowling BPCL-9136.
Lower Cowling, (Carbon) NX5 RS250R (1993 Style) (BPFL-9136)
The carbon lower fairing is modelled off the 1993 version of the NX5 RS250R but will fit any NX5 which uses a stock upper as far as we can tell.
To be used with upper cowling BPCU-9036
Seat Cowling Race (Carbon) NX5 RS250R (1993 Style) (BPFT-9236)
The carbon seat cowling is modelled off the 1993 version of the NX5 RS250R but will fit any NX5 which uses a stock subframe as far as we can tell. It is easy to install, is strong and crash resistant.
Made to order, takes approx 1 to 2 weeks to be ready for shipping
This product contains the following items:
TYGA no: BPFS-0181
SKU: hon-10953 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, Shop