Turn signal Set Front black, Honda RC30 style
€90.08
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: BPLT-0040
SKU: hon-11541 Categories: ALL products, Electrical, Honda, RC36-2 -> RC30 replica products, Shop, StocklistFuel Tank, GRP, NSR250, MC21, Painted Rothmans
€1,304.96
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: BPFG-0004Painted
SKU: hon-11281 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, NSR250, NSR250 MC21, Shop, SilencersCarbon tank protector, Honda RVF400
€104.89
This real carbon protector is designed to fit snuggly on the NC35 fuel tank and will prevent scratches from zippers etc. It will also add some individual style to your pride and joy.
TYGA no: BPCC-0015
SKU: hon-10363 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, RVF400RR NC35, ShopCarbon tank In-Fill panels, Kawasaki ZXR250 2008 –
€336.55
Beautiful carbon parts, easy to install and look really good on the bike.
These high quality carbon parts replace the cheap looking plastic original parts supplied by Kawasaki. Complete with all fixing points, identical to original they are easy to install.
TYGA no: BPCC-7016
SKU: kaw-10015 Categories: ALL products, Carbon, Kawasaki, Ninja 250R 2008- 12, ShopSilencer carbon round 43mm, Kawasaki ZXR250 2008 –
€284.06
Silencer, Carbon, Round, 43 mm. x 380 mm., Assy.
This silencer has polished stainless steel endcaps and a tough carbon tube for a lightweight and attractive finish. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
The ‘slip-on’ mount is designed to fit any system with a 2" external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe. A silencer mounting clamp is also provided to secure the silencer to the bike.
Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.
Compatible with TYGA and other systems which use a 2 inch external diameter tail pipe, this silencer uses a 4 inch x 380 mm. outside aluminium tube.
TYGA no: EXSL-0032Â
SKU: kaw-10023 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R 2008- 12, Shop, SilencersRod M6 leftd.
€14.78
Replacement rod end joint for your TYGA Step Kit.
M6 LH F. Rod End SILBP6S
TYGA no: STRE-1006
SKU: alg-10039 Categories: ALL products, By model, CNC parts, Kawasaki, Ninja 400R 2018-, ShopCarb Service Kit A, 48 pieces, Honda VFR750R RC30
€97.64
Carb Service Kit A, 44 pieces, Honda VFR750R RC30
LiteTek Carburettor Seal Kit to suit: Honda VFR750R RC30
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
4x FB-025 Float Bowl Ring, Material: Flourosilicone *
4x OR-005 Pilot Screw O-Ring, Material: Viton 70A *
4x WS-001 Pilot Screw Washer, Material: Stainless Steel
4x OR-009 Drain Screw O-Ring, Material: Viton 70A *
4x OR-040 Air Cut Seal, Material Viton 70A *
4x OR-041 Breather O Ring, Material: Viton 70A **
4x OR-016 Top Cap O-Ring, Material: Viton 70A *
4x OR-042 Float Bowl O-Ring, Material: Viton 70A *
4x OR-011 Overflow O-Ring, Material: Viton 70A **
4x OR-012 Fuel Tee O-Ring, Material: Viton 70A **
4x CS-004 Choke Plunger Cap, Material: HNBR
Honda OEM parts numbers :
* No: 16010-MR7-014 → 16010-MR7-505 or 16010-MR7-691 → 16010-MR7-692 → 16010-MR7-505
** No: 16040-MR7-004
TYGA no: CK-Honda-RC30
SKU: alg-10349 Categories: ALL products, Carburettor Service Kits,, Honda, VFR750R RC30Forged Aluminium Racing wheel set, 5 spoke, PVM, Front 3.50 x 17, Rear 5.5 x 17, Gold.
€1,859.00
Forged Aluminium Racing wheel set, 5 spoke, PVM, Front 3.50 x 17, Rear 5.5 x 17, Gold.
This racing wheel set has been designed specifically for the following model applications:
NX5 RS250R
RC30 VFR750R
RC45 RVF750
This exciting 5 spoke forged racing wheels set, has been exclusively developed by TYGA Performance and PVM to bring you the ultimate wheel combination for your motorcycle. PVM is a long established German wheel manufacturer, supplying motorcycle manufacturers such as BMW and racing teams in Moto GP such as Tech3 as well other series around the World. For this project, TYGA Performance reached out to PVM to supply a wheel specific to the requirements of the motorcycles we ride and love. The result are these beautiful and functional wheels you see on these pages.
Technical Features of PVM Forged Aluminium Wheels
Forged from AlMgSi1 aluminium
Crop-milled rim
100% quality control of forging process
Completely CNC-manufactured and thus virtually 100% free of imbalance and faults
Low unsprung weight and low rotating mass, drastically improving acceleration, braking and handling
More stable than conventional cast wheels
Far greater corrosion resistance compared to magnesium wheels, without increased mass.
Wheels come with all necessary bearings and hub spacers and valves
Specific details and features of the TYGA PVM wheels designed for MC28, NC30, NC35 application.
For the RVF400, VFR400 and MC28 NSR250: Please see set TWHL-0012
Fitment: They are a direct fitment for the models listed. The rears are specifically designed by us here at TYGA to fit the Honda street bike hubs without the need to modify or change the rear brake rotor mounting bolts and the fronts have the correct bearing spacing for Honda street bikes of that period, so no time wasted by the user adapting them to fit. Simply use together with the OEM wheel spacers.
Weight: Weight. These wheels are super light and suitable for racing. The front 3.50 weighs: 2.738 kg, the 5.00 rear weighs: 3.073 KG and the 5.50 weighs: 3.228 kg
Strength: These wheels are made from forged aluminium so super strong but much lighter than cast aluminium wheels They are stronger and less prone to corrosion and cracking than magnesium. See load chart below for details of maximum weights.
Peace of mind: They are brand new compared to most lightweight wheels available for these models which are mostly around 20 years old and therefore past their safe use date
Style: They look stylish and modern with the Y spoke design and the tough and elegant finish in gold, white and satin black give the perfect finishing touch to your motorcycle’s appearance.
Torque specs
Front Axle Nut: 60 Nm (43 ft-lb)
Rear Wheel Nut: 120 Nm (87 ft-lb)
TYGA no: TWHL-0013
SKU: alg-10302 Categories: ALL products, Honda, PVM wheels, PVM Wheels, RS250R NF5 / NX5, VFR750R RC30