Stay, Comp, Upper Cowling, Ninja 250R 2008 -12
€114.70
Stay, Comp, Upper Cowling, Ninja 250R 2008 -12
TYGA no: 39137-0058-18R
SKU: kaw-10205 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopTank filler cap racing , Yamaha/Ducati
€69.87
Tank Filler Cap, Keyless, Racing Type, Yamaha/Ducati
This keyless racing fuel tank filler cap is CNC machined from billet alminium and anodised black with a laser etched TYGA logo. Designed with finger tabs for easy removal while wearing gloves
Supplied complete with seals and mounting hardware, it can be installed in minutes. This product is suitable for the following models:
YAMAHA
- R6 (All Years
- R1 (All Years)
- FZ-6 (All Years)
- FZ-1 (All Years)
- FZR1000 (All Years)
- FZR750 (All Years)
- FZR400 (All Years)
- FZR250 (All Years)
- TZR250 3MA, 3XV
- YSR50 (All Years)
- YZF1000 (1997-98)
- YZF600 (1994-97)
- YPVS-F2 RD350/RZ350 (1986)
Ducati :
- 748 (all years)
- 851 (all years)
- 888 (all years)
- 916 (all years)
- 996 (all years)
- 998 (all years)
- Monster S4R S2R etc.. (all years)
- 600 750 and 900 SS (all years)
- 600 750 900 ST2 ST4 (all years)
- 848, 1098, 1198 (all years)
- Desmo RR
TYGA no: TYLY-0111
SKU: alg-10191 Categories: 848 / 1098 / 1198, ALL products, Desmosedici RR, Ducati, Monster, Shop, Tank fillers, Yamaha, YZF-1000 R1 2002- 6, YZF-1000 R1 2007- 8, YZF-1000 R1 2009- 14, YZF-600 R6 2006- 7, YZF-600 R6 2008- 12Exhaust set slip on, Motogp style stainless steel maggot , Honda MSX125 GROM
€307.40
Set, Pipe, Slip On, MSX125 Grom, Moto Maggot Silencer
Made in stainless steel with spring mounted aluminium silencer, this system significantly increases performance, saves weight and gives the best bang for the buck! (May not comply with noise regulations for some states and territories)
This system is supplied with a Moto Maggot EXSL-8013
Compatibility:
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
TYGA no: EXPS-0034
SKU: MSX-10004 Categories: ALL products, Exhausts, Exhausts, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020, ShopSilencer stainless steel Motogp style (4 stroke) 50mm maggot
€205.90
The TYGA Moto Maggot stainless silencer, with 50.8 mm inside diamter, is definitely not for the fainthearted. The music emitted at full volume is simply ear drum shattering and would not be out of place in the MotoGP paddock.
 
We’ve used our two stroke pipe manufacturing technology to bring you this all stainless construction of hand rolled and hand welded cones. The 2 baffle core is also stainless. The silencer is then packed with glass before final welding.
 
The ‘slip-on’ mount is 2 internal diameter, so is compatible with our existing TYGA NC30/35 pipe and any other system with a 2 (approx. 50mm) external diameter tail pipe.
 
The Maggot is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe.
Two extra (stainless) spring hooks are supplied with the kit, which can then be welded to any other system that may need modification to fit the silencer.
 
Please be aware that this silencer is exceptionally loud! It will, however, get you noticed wherever you go!
The overall length is approx. 320 mm. and fits onto a 2 pipe section. The clamping area is 4 in diameter. Contains an inner baffle tube and some sound deadening material but is still very loud; this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system will definitely NOT comply to specific country noise emission regulations and is NOT homologated for street use. You have been warned!
For use with pipe set EXPS-0012 or any system using a spring mounted 2 inlet.
<a title= maggot 50mm href= {{media url= wysiwyg/04-maggot-excl-0013-50-a22866c7_1_.8mm.pdf }} target= _self >Click here for PDF</a>
<iframe width= 560 height= 315 src= https://www.youtube.com/embed/hfUVXzAkxmM frameborder= 0 allowfullscreen></iframe>
TYGA no: EXSL-0013
SKU: alg-10030 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, Silencers, VFR400RR NC30Top triple clamp set CNC black, Honda VTR1000 SP1
€327.34
CNC machined top triple clamp with detachable ignition switch/lock holder for your Honda SP1. Designed and manufactured in house as a direct replacement for the standard top triple clamp. Fully functional steering lock.
Crafted from aircraft spec 6061-T6 aluminium, using high technology 3D machining, the TYGA clamp and key holder set offer high strength while being lighter than the standard component, and offers an improved and individual look to your bike.
Carbon rear hugger RC211V, CBR400RR
€192.62
A very stylish replacement hugger for the NC29, following the RC211V trend.
This light weight carbon hugger simply clips into the swing location and bolts on using original mounting points
Carbon front fender stock shape , Honda NSR250 MC18/MC21/MC28
€165.87
Real Carbon fibre reproduction of the stock OEM Honda front fender. Finished in high gloss, adds beauty and reduces unsprung weight. (weight of part approx. 0.2 kg)
TYGA no: BPCF-0009
SKU: hon-10480 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, ShopCarbon lower cowling GP-T, Honda NSR250 MC21/MC28
€509.98
Lower Cowling (Carbon), NSR250 GP-T, Assy.
This product is designed to be used with BPCU-9033 as part of the Bodywork set BPFS-0138
Designed in-house by TYGA Perforance and using 15 years experience of developing fairings for the NSR250, this fairing is lightest and most stylish yet. The design allows for the extra width of an HRC radiator while at the same gives maximum clearance with the track at high angles of lean. Other features include a vent underneath and high quality lamination by our skilled craftsmen. Weight is under 1 kg but strength retained using high strength epoxy resins and good design. Also available in GRP, see BPFL-9033
It is supplied with spacers to place between fairing and rear lower mounts to ensure clearance with exhaust chambers.
Compatible products:
This product must be used with BPCU-9033
This lower cowling is designed to be used with stock or race exhaust systems though some spacing may be necessary to get clearance with chambers:
1. stock systems, fit with no spacing but will need a small part of the indent on the lower vent removed to clear the chamber. We can modify the lower to fit the stock chambers if requested
2. Tyga chambers require some spacing but no cutting. On some systems (particularly MC28) no spacing is necessary
3. Other systems, can not advise, but should require only spacing or possibly cutting of front of lower where front cylinder header exits.
TYGA no: BPCL-9033
SKU: hon-10541 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, NSR250 MC21, NSR250 MC28, Shop