Racing stepkit adjustable (race), KTM RC390 2022-
€423.04
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: STAA-0137
SKU: ktm-10198 Categories: ALL products, CNC parts, Exhausts, KTM, RC390 2022-, Stock list, all modelsCarbon meter cover silver, NSR250 MC28
€36.50
Attractive carbon cover for MC28 meter assembly.
For fitment, simply remove the three retaining bolts, stick on the cover and replace the bolts
TYGA no: BPCC-0003
SKU: hon-10246 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, By model, Carbon, Honda, NSR250 MC28, ShopCarbon rear hugger, Suzuki GSX 1000 K9-K11
€171.31
Lightweight carbon fibre direct replacement for Suzuki OEM item. Predrilled for use with stock mounting hardware.
Let your bike stand out from the crowd with this beautiful carbon fibre product.
Tyga step replacement left side hanger , Yamaha R25/R3
€40.65
Tyga Step Kit Replacement Left Side Hanger, Yamaha R25/R3, Assy. Complete with mounting bolts.
TYGA no: STAH-0049
SKU: yam-10052 Categories: ALL products, CNC parts, Stock list, all models, Yamaha, YZF-R25/R3Handlebar Clamp, Right, Silver, 41 mm.
€93.45
Replacement Right handlebar clamp for handlebar set TYLY-0077
Carbon Lower Cowling, NX5 RS250R (late model style)
€521.68
Upper Cowling Race, (GRP) NX5 RS250R (1993 Style) (BPFU-9236)
The upper fairing is modelled from the first version of the NX5 which has the side air intake. We made it slightly different by smoothing the left side where there is normally a cut out near the steering damper but is otherwise stock shaped. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with lower cowling BPFL-9136.
Requires screen SCRE-0173
TYGA no: BPCL-9036
SKU: hon-10952 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopCarbon frame cover, Aprilia RS250 MK1 / MK2
€326.68
Carbon fuel tank MK1, Aprilia RS250
Finished in high quality UV resistant clear-coat to show off the beauty of the carbon weave.
These lightweight carbon covers fit over the frame and they are designed to protect against scratches and damage to the frame in the event of an accident.
TYGA no: OO1501KP/TYGA
SKU: apr-10103 Categories: ALL products, Aprilia, Bodywork and carbon, Carbon, RS250, ShopVHM cylinder head (2 pieces), Yamaha TZ250 1995 ’02
€574.90 €512.20
VHM cylinder head (2 pieces), Yamaha TZ250 <’02 (alg-10170)VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.We are pleased that we can offer VHM products on our website.VHM produces exchangeable cylinder heads for two-stroke engines in motocross and road racing. With the experience gained in two-stroke tuning, VHM develops products of high quality.During intensive tests, on the racetrack as on the VHM dyno, the cylinder head showed a better temperature development in the cylinder head. A lower engine temperature followed. The explanation of this phenomenon is the use of a special aluminum alloy which has a very good heat transference. Another advantage of the material is its resistance to detonation.The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring designThis head set comes with following parts:2x cylinder head2x standard insert (12.0cc)This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl