Gasket cylinder 0,4 NF5
€12.29
Gasket, Cylinder, 0.4mm NF5
Fits MC16~28. Use to adjust deck height/squish/compression ratio.
TYGA no: 12191-NF5-610
SKU: hon-10413 Categories: ALL products, High performance, High performance, High performance, High performance, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, ShopCarbon tank shields, Yamaha R6 2006-7
€258.68
This product replaces the cheap looking plastic panels which fit between the frame and the tank on the R6. This product comprises one left and one right panel which can be fitted in minutes. Front part held in place by Velcro provided.
TYGA no: BPCC-7409
SKU: yam-10023 Categories: ALL products, Carbon, Shop, Yamaha, YZF-600 R6 2006- 7Seat pad large , flat
€46.69
Vinyl covered medium density foam race seat pad provides a maximum amount of feedback from the bike and minimum comfort!
Underside of seat has velcro stitched in. Kit is supplied with a strip of Velcro with strong 3M adhesive tape appied on the underside. Easy installment. Cut the strip to size using scissors, one each side recommended. Then simply peel back the protective layer on the adhesive strip, lay the strips on the seat cowling and place the seat pad in position.
Compatible Parts:
Tyga Tail cowling: BPFT-9030 BPFS-0102 and BPFS-0103
Top triple clamp CNC black RACE, KTM RC390, 2022-
€442.15
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: TYLY-2031
SKU: ktm-10216 Categories: ALL products, CNC parts, Exhausts, KTM, RC390 2022-, Stock list, all modelsTriple clamp set CNC silver, Honda NSR150
€142.52
CNC machined TYGA top triple clamp for race use ( not including detachable key holder) for your NSR150SP.
Designed and machined in house by TYGA, as a direct replacement for the OEM top triple clamp. FEA tested and developed for increased strength without unnecessarily increased weight.
Crafted from aircraft spec 6061-T6 alloy, the top triple clamp is ready to fit.
The detachable ignition switch/lock holder which is positioned to allow use of the steering lock can be bought separately or order as triple clamp set TYLY-0051.
Exhaust section, stainless steel, Honda CBR500
€87.08
Section, Final, Stainless, CBR500, suitable for our systems EXPS-0045 and EXPS-0046
TYGA no: EXPT-0041
SKU: hon-10342 Categories: 4 stroke exhaust sets, ALL products, CBR500R, Exhausts, Honda, ShopFairing stay front, GP-T. Honda NSR250 MC21/MC28
€19.98
Fairing Stay, Front, NSR250, GP-T, Assy.
This stay mounts to the stock Honda meter stay or TYGA meter stays TYLY-0004 and TYLY-0005 and allows for fitment of the upper fairing BPCU-9033 and BPFU-9033. Supplied complete with plastic bung for quick fairing assembly and removal.
Compatible Parts
TYGA upper cowlings, BPFU-9033 and BPCU-9033.
TYGA no: BPSY-0155
SKU: hon-10536 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork and carbon, Bodywork and carbon, NSR250 MC21, NSR250 MC28, ShopBum stop, RC30 style replacement
€74.00
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: BPSP-0012
SKU: hon-11470 Categories: ALL products, Bodywork, Honda, RC36-2 -> RC30 replica products, Shop, Stocklist, various parts