Upper cowling set GRP endurance Painted RT, Honda RVF400 NC35
€590.33
Upper Cowling Set, Endurance, (GRP) NC35, Painted RT
This Suzuka 8 Hour inspired cowling painted RT is supplied with four headlight covers, one pair in matching black and red and two in clear (yellow can be supplied instead of clear, see available options on the bottom of the page) The fairing uses the stock NC35 headlight and mounts to the bike in the same way as the Honda part including mirror stay, meter stay, mirrors, air duct, indicators etc. It can be used either with the TYGA lower cowling BPFL-0103 Painted RT, or can be used with stock Honda NC35 lower and inner cowling too. We also supply this product in carbon, unpainted and painted in RR colours ready to install. See our product list for the painted versions.
The windscreen is not included. Please order one of the following windscreens:
SCRE-0041
SCRE-0042
SCRE-0043
SCRE-0105
SCRE-0125
SCRE-0132
Note: Photos shown with the fairing fitted on the bike is the painted RR version
TYGA no: BPFS-0154 RT
SKU: hon-10641 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35Bolt, Fairing, MC28
€2.59
Bolt, Fairing, MC28
TYGA no: 90103-KV3-830
SKU: hon-11093 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Chain adjuster/rear stand bobbin, Honda CBR500
€254.51
This Chain Adjuster/Rear Stand Bobbin Assy. for the CBR500 enables easy installation of a rear paddock stand for chain maintenance and use of tyre warmers etc. It also replaces the cheesy original chain adjusters allowing for ease of removal and fitment of the rear wheel. Unlike the original ones, which fall in a heap on the ground when you pull the rear wheel shaft out, these precision CNC machined adjusters will stay in place enabling the task to be easily completed by yourself.
Please note the bike is secure with the rear wheel removed, however, do not attempt to move the bike in this state.
Upper cowling track , Honda VFR750 RC30
€253.86
Upper cowling “track”, Honda VFR750 RC30 (hon-10568)
Direct replacement for OEM Honda lower cowling with headlight and indicator holes filled in. Due to being constructed with strong flexible epoxy resin, it is thinner and therefore about 65% the weight of the stock upper cowling. In every other way, the same as stock. Can be used with TYGA Performance or factory Honda RC30 lower cowlings.
Top End Rebuild Kit MC18, Cyl. A, Assy.
€293.88
Below is everything you need to do a top end rebuild on your MC18. Suitable for cylinder ‘A’. One kit includes all parts for one cylinder. To overhaul both cylinders please order 2 kits.
There are different kits depending on the piston supplied and the pistons are sized to match the cylinder. The cylinders have a letter stamped on them. A cylinder = B piston B cylinder = no mark piston, C cylinder = D piston. The largest cylinder bore is A and the smallest is C. However, note that this is only for when cylinders are new or in good condition, so if the cylinder is worn, the corresponding piston will be a looser so a bigger piston might be advised. If the cross hatch honing of the cylinder is very feint then we suggest using the next size up piston. The differences in sizes are tiny (11 microns between largest and smallest) and for the most part not an issue so it is not a problem if a smaller piston is used in a larger cylinder or the other way round.
Cylinder A = 54.008mm – 54.011mm use Piston B = 53.966mm – 53.969mm
Cylinder B = 54.004mm – 54.008mm use Piston # = 53.962mm – 53.965mm
Cylinder C = 54.000mm – 54.004mm use Piston D = 53.958mm – 53.961mm
Piston to bore clearance = 0.039mm – 0.045mm
TYGA no: NHPS-0002A
SKU: hon-10878 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC18Bum stop, RC30 style replacement
€74.00
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: BPSP-0012
SKU: hon-11470 Categories: ALL products, Bodywork, Honda, RC36-2 -> RC30 replica products, Shop, Stocklist, various partsSection, Header, Left, Stainless, Ninja 250R
€79.66
Header, Reft. Used on EXPS-0014, EXPS-0015, EXPS-0016, EXPS-0017 and EXPS-0018.
TYGA no: EXPT-0012
SKU: kaw-10104 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R 2008- 12, ShopUpper /mirror stay RC36-2, RC36-2 RC30 style
€212.39
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: TYLY-0305
SKU: hon-11457 Categories: ALL products, chassis & fittings, Honda, RC36-2 -> RC30 replica products, Shop, Stocklist