Carbon rear hugger,Honda CBR250 2011 – CBR300 2014
€236.91
This lightweight carbon version of the stock hugger will enhance the beauty of your CBR as well as reduce unsprung weight.
TYGA no: BPCH-7208
SKU: hon-10183 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, CBR250R 2011 - 15, CBR300R 2014-, Honda, ShopSeal, Sw/Arm Bearing L., MC28
€6.00
Seal, Sw/Arm Bearing L., MC28
TYGA no: 91202-MR7-003
SKU: hon-11114 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28TYGA stepkit replacement brake Master cylinder holder plate, Ninja 400
€32.64
TYGA Step Kit Replacement Brake Master Cylinder Holder Plate, Ninja 400
Carbon front fender, Honda VTR1000 Sp1/Sp2
€220.62
High quality carbon fibre gloss finish replacement part that weighs a fraction of the original heavy plastic one. Saves on unsprung weight and enhances your bike’s appearance at the same time.
Beautiful, perfect fitment and give your bike that HRC look.
Section header stainless WSS300 race system, KTM RC390
€226.68
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXPT-0077
SKU: ktm-10135 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsUpper Cowling Race (GRP), NC30/NC35, GP-T, Assy.
€317.01
Upper Cowling, Race (GRP), NC30/NC35, GP-T, Assy.
Stylish replacement fairing designed in-house by TYGA Performance to give the NC30 and NC35 a contemporary look. Together with lower cowling BPFL-9034 for NC30 and BPFL-9134 for NC35 and other mounting hardware it comprises race sets BPFS-0163 for the NC30 and BPFS-0164 for the NC35.
This cowling is supplied with a plastic bung to mount to the meter stay.
Compatible parts:
BPFL-9034 and BPFL-9134 Lower Cowling
TYLY-0138 (NC30) and TYLY-0139 (NC35) Upper Stay
TYLY-0187 (NC30) and TYLY-0188 (NC35) Front Stay
TYLY-0189 (NC30) and TYLY-0190 (NC35) Side Stays
SCRE-0161 Screen, Clear GP-T, or SCRE-0162 Screen, Tint GP-T
TYGA no: BPFU-9134
SKU: hon-10725 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork and carbon, RVF400RR NC35Front stay steel, standard, Suzuki RGV250 VJ22
€95.39
CNC machined TYGA triple clamp set for your RGV250 VJ22.
These stylish, all aluminium triple clamps are a direct replacement for the OEM VJ22 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!
They are delivered without seals and bearings, but include an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy. Weights 1800 gram.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
Update your RGV250 with these light, strong and cool triple clamp set.
TYGA no: TYLY-0261
SKU: suz-10210 Categories: ALL products, CNC parts, RGV250 VJ22, Shop, Suzuki, Various partsCarbon fairing set street GP-T, Honda RVF400 NC35
€1,889.29 €1,700.36
The ultimate faring set for your Honda RVF400 NC35!!
Kit, Fairing Set, Carbon, (Street), NC35 GP-T
This modern fairing, designed in-house by TYGA Performance, is the culmination of 15 years of experience developing bodywork for the NC35. As well as bringing the NC35 up to date, it also offers a useful weight saving and easy fitment and removal. The kit is supplied with all mounting hardware including carbon fiber side stays and aluminium upper and front stays. The headlights used in this kit, are LED and consist of two units either side with 2 on low and 4 on high beam. The system uses a lot less current than conventional halogen systems while at the same time being discrete but stylish. Please note that the headlights do not comply with road use regulations and are unsuitable for high speed riding on unlit roads.
Like all our fairings, this product uses only the best epoxy resins and high quality fabrics to give a strong, light and flexible panel. All our products are hand made by our skilled craftsmen and are built to a very high standard.
As well as this fairing BPFS-0147 which is made using carbon fiber panels finished in high gloss UV protective clearcoat, we offer a similar product using GRP (glass reinforced plastic) which is primed and ready for paint**. See BPFS-0145
* A clear screen is provided unless you specify tinted in the comment box at check out.
** We recommend trial fitting and making and minor adjustments before painting
TYGA no: BPFS-0147
SKU: hon-10602 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35