Upper cowling RSW street, Honda NSR250 MC21/MC28
€219.65
Stylish replacement fairing based very closely on the GP250 RS250RW World championship winning race bike design. This upper cowling has been designed to be used on a street bike and uses a bright modern headlight unit with built in turn signals (BPLT-0011 ). This upper cowling is designed only to be used with our latest redesigned GP250 lower cowling BPFL-9014 combining for the ultimate in NSR250 race fairing design. We recommend this fairing to be used with TYLY-0001 GP upper stay and our GP mirrors TYMR-0001.
This cowling is supplied with a cowling meter stay extender to mount to the meterstay. This changes the position the fastener screws in to match the RSW upper cowling and to move it forward for a perfect fit.
Compatible Parts:
BPFL-9014 lower cowling
requires headlight BPLT-0011 and screen SCRE-0079, and SCRE-0080
TYGA no: BPFU-9012
SKU: hon-10239 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, By model, Honda, NSR250 MC21, NSR250 MC28, ShopLower cowling GP-T, Honda RVF400 NC35
€216.35
Lower Cowling (GRP), NC35 GP-T, Assy.
This product is designed to be used with BPFU-9034 as part of the Bodywork set BPFS-0145
.
Designed in-house by TYGA Performance and using 15 years experience of developing fairings for the NC30, this fairing is lightest and most stylish yet. The design incorporates mounting points for the radiator mesh and other features include a vent underneath and high quality lamination by our skilled craftsmen. Weight is about 1 kg but strength retained using high strength epoxy resins and good design. See also carbon version BPCL-9134.
Compatible products:
This product must be used with BPFU-9034
This lower cowling is designed to be used with stock or race exhaust systems though some spacing may be necessary to get clearance with race exhausts:
1. stock systems, fit with no spacing but care should be taken when installing to avoid any touching or proximity to exhaust and subsequent burning of the fairing.
2. Tyga exhaust can be installed with no modification
3. Other systems, we can not advise, but should require only spacing or possibly cutting area around where pipe exits near sidestand.
TYGA no: BPFC-0038 painted
SKU: hon-10598 Categories: ALL products, Bodykit replacement parts, Bodywork and carbon, RVF400RR NC35Section, Secondary A, R.H Exit, VFR750F, 3rd Gen, 90-93
€107.88
TYGA no: EXPT-7151
SKU: hon-11344 Categories: ALL products, Exhausts, Honda, Shop, VFR750F Gen 3 90-93Upper Cowling, Race, GRP, KTM RC390 WSS300
€170.63
Upper Cowling, Race, GRP, KTM RC390 WSS300
Replacement Upper Cowling. WSS300, MUST be used with KTM WSS300 hardware
see also:
BPCU-7331U (Carbon Unpolished)
BPCU-7331 (Carbon Clearcoated)
Belly pan race cup style, KTM RC390 (16-)
€160.51
Belly Pan, Race, (GRP), Cup Style, KTM RC390 (16-18)
This lightweight belly pan is modelled on the KTM RC390 Cup shape, but being made from high quality epoxy resin, it is stronger and more flexible so more likely to survive in the event of a crash. It isreinforced with carbon/Kevlar at the mounting points and is primed and ready to accept paint.
This product is supplied with all mounting hardware (including the left rear stay which is not supplied with the KTM product) so you can install this with stock footpegs or any other aftermarket make such as TYGA Performance. it is also supplied with a rubber bung to make the belly pan fluid retentive.
We aim to have this product in stock at all times for immediate shipping. No waiting or worrying about if the parts will arrive in time for your next race.*
Please note, this product fits the 250 and 390 only. For the 125 and 200 models, we don’t have information on if it will fit or not.
TYGA no: BPFL-7331
SKU: ktm-10129 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, KTM, RC 390, ShopTriple Clamp Set, CNC Silver race, NSR250 M21/MC28 to fit NX5 forks
€714.33
Triple Clamp Set, CNC Silver, Race, NSR250 MC21/28 To Fit NX5 Forks
CNC machined TYGA triple clamp set for the MC21 to take Honda RS250 NX5 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy, and anodized clear. FEA tested and developed for increased strength without unnecessary weight increase.
This triple clamp set is delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
There is no provision for the ignition switch, so an alternative mounting location must be found.
Pitch of forks: 200mm (Same as RS250)
Fork Offset: 35mm (Same as NSR250)
Top Clamp: 50mm Bore
Bottom Clamp: 54mm Bore
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-0262
SKU: hon-10914 Categories: ALL products, CNC parts, CNC parts, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Mikuni main jet # , Suzuki RGV250 /Aprilia RS250
€5.45
Mikuni main jet, Suzuki RGV250 / Aprilia RS250
Choose option below
TYGA no: alg-10106 - alg-10240
SKU: Mikuni 270 - 320 Categories: ALL products, Aprilia, By product, High performance, High performance, High performance, RGV250 VJ21, RGV250 VJ22, RS250, Suzuki, Various parts, Various parts, Various partsRacing step kit CNC silver, Honda RS250 NX5
€271.50
Designed and built in-house by TYGA Performance using CAD/CAM software, these CNC machine- made step kits are manufactured from top grade aluminium and is supplied complete with super stiff carbon heel guards.
Direct replacement for standard parts, this step kit retains standard position. Pitch of hanger to frame mounting holes is 78.4 mm.
TYGA no: STAA-0022
SKU: hon-10511 Categories: ALL products, CNC parts, CNC parts, Honda, RS250R NF5 / NX5, Shop