Carbon Seat set street GP-T, Honda RVF400 NC35
€1,913.80 €1,722.42
The ultimate seat set for your V4 Honda!
This modern seat cowling, designed in-house by TYGA Performance, is the culmination of 15 years of experience developing bodywork for the NC35. As well as bringing the NC35 up to date, it also offers huge weight saving and easy fitment and removal. The seating position is higher and roomier compared to the stock NC35 postition, bringing it into line with modern sports bikes ergonomics. The seat pad is designed to give plenty of feedback for race use and the cowling has plenty of space for tucking in behind the fairing along the straights. The seat cowling is designed so that the fuel tank can be removed while leaving the seat cowling installed, allowing for quick jetting changes etc.
The kit is supplied with all mounting hardware including subframe and battery box. The taillight used in this kit, is LED and may not comply with road use regulations in some territories,( though we have not heard of any issues after selling them worldwide for ten years).
Like all our fairings, this product uses only the best epoxy resins and high quality fabrics to give a strong, light and flexible panel. All our products are hand made by our skilled craftsmen and are built to a very high standard.
As well as this seat cowlng set BPFS-0151 which is made using carbon fiber panels finished in high gloss UV protective clearcoat, we offer a similar product using GRP (glass reinforced plastic) which is primed and ready for paint**. See BPFS-0149
** We recommend trial fitting and making and minor adjustments before painting
TYGA no: BPFS-0151
SKU: hon-10604 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35Carbon fuel tank MK1, Aprilia RS250
€1,225.57
Carbon fuel tank MK1, Aprilia RS250
Top quality reproduction of the Aprilia RS250 MK1 fuel tank.
Finished in high quality UV resistant clear-coat to show off the beauty of the carbon weave.
For the construction of this tank, all the innovation and technology were used, it’s made with a particular technique that allows us to use a single piece of carbon with significant aesthetic and structural advantages The internally there are several layers of Kevlar to increase impact resistance.
The internal surface is treated with a special coating made to our specifications to ensure the seal over time. The air vent is in anodized and made and design in house.
And as a finishing touch, the carbon frame bracket is also supplied with titanium fixing screws.
Not included:
– fuel cock
– stock mounting rubbers
– filler cap and seal
TYGA no: 004900TYGA
SKU: apr-10102 Categories: ALL products, Aprilia, Bodywork and carbon, Carbon, RS250, ShopGasket, Generator Cover, Ninja 250R 2008 -12
€12.88
Gasket, Generator Cover, Ninja 250R 2008 -12
TYGA no: 11060-1920
SKU: kaw-10224 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopCarbon set, Yamaha R1 2009-14
€458.68
Carbon set, Yamaha R1 2009-10
A set contains:
Front fender
Rear Hugger
Chain guard
Direct replacement for original Yamaha part
Buy a complete set and it saves you money.
PLEASE NOTE: all ” TYGA” logo stickers on the carbon products can be easily removed because it is applied last above the clearcoat finish.
TYGA no: BPFS-0089
SKU: yam-10001 Categories: ALL products, Carbon, Shop, Yamaha, YZF-1000 R1 2009- 14Triple clamp set CNC black, Honda NSR250 – CBR600 fork
€673.59
Triple Clamp Set, CNC Black, CBR600RR Forks to fit MC18
CNC machined TYGA lower triple clamp for the NSR250 MC18 (1988/1989) to take 53 mm diameter CBR600RR forks. (For later model CBR600RR which use 54 mm forks, we can supply by special order so please send us an email or put a comment with your order that you need 54 mm and not the default 53mm.)
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Note, we recommend using Handlebar set 48 mm. TYLY-0012 when installing this triple clamp set for best clearance issue with the NSR fairing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-1245
SKU: hon-10702 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250, NSR250 MC18, Stock list, all modelsSection, Final, Stainless, Yamaha R25/R3
€147.90
Section, Final, Stainless, Yamaha YZF-R25 and YZF-R3
Used with EXPS-0072, EXPS-0073, EXPS-0074 and EXPS-0075.
Exhaust Stay, MC18, GP-T, Left, Assy.
€68.35
Exhaust Stay, MC18, GP-T, Left, Assy.
This replacement exhaust stay is designed to be used with our GP-T kit for the MC18 and attaches to subframe TYLY-0183. Note this kit uses two stays, one for each side:
1 x TYLY-0198L for left
1 x TYLY-0198R for right
NSR250 1988 and 1989 MC18
TYGA no: TYLY-0198L
SKU: hon-10734 Categories: ALL products, Bodykit replacement parts, Bodywork and carbon, NSR250 MC18TYGA bike dust cover Blue/Black RGV
€63.10
TYGA bike dust cover Blue/Black RGV
This cover is handmade from 100% breathable polyester and ideal for an indoor dust cover. Suitable for sports bikes from 125cc to modern 1000cc. sportsbike, the cover features a pull-string around the bottom to secure it in position, comes with its own storage pouch and is machine washable.
Note, this is for indoor use only. For a weatherproof cover, see 08P34-KPP-700 Honda Bike Cover.
Please contact us for your special requirements for custom-made dust covers or custom screen printing. Minimum order quantities apply.
TYGA no: TMER-0082
SKU: suz-10113 Categories: ALL products, Bike covers, Honda, Merchandise, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, Shop, Suzuki, Suzuki RGV250, Universal parts, Various parts, Various parts