Racing step kit, Honda VFR750 (gen 4) 1994 -’97
€424.38
Racing Step Kit, Honda VFR750, Gen4 (1994-1997)
TYGA Performance racing step kit assembly. Designed in-house by TYGA Performance, these CNC machined step kits are made from top quality, aircraft grade aluminium. Features levers moving on ball bearings to give precise and smooth movement, and comes complete, ready to bolt on with stainless steel fasteners and all the required hardware.
Includes rear brake light provision, and retains the standard exhaust guard.
Carbon heel guards are included for both left and right hangers.
Peg position is 10 mm. up and 10 mm. back. Pitch of hanger to frame mounting holes is 78.6 mm.
TYGA no: STAA-0030
SKU: hon-11211 Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, RC36-2 -> RC30 replica products, Shop, VFR750F Gen 4, 94-97** special promotion** TYGA-VHM-alum performance set, Aprilia RS125
€558.77 €502.89
Great performance set for your Aprilia RS125 (fits all 2 stroke models)
All parts shown on the picture are in the set.
TYGA stainless steel cone welded exhaust for maximum performance, light and clean aluminium TYGA silencer. For great 2 stroke sound.
If you want a carbon or carbon/kevlar silencer, please check product alg-10252
VHM insert for good compression and best performance.
A must for every Aprilia RS125 owner, and now for an unbeatable price.
Handlebar set Black, ninja 400
€194.12
Handlebar Set, Black, Ninja 400
This CNC machined handlebar set is designed to change the handlebars to be up to 25 mm. lower from the stock position giving a more sporting riding position. The ergonomics work very well allowing more weight over the front end for better control, while putting the rider’s upper body lower behind the fairing for better areodynamics and less fatigue at high speed riding.
TYGA no: TYLY-1212
SKU: kaw-10131 Categories: ALL products, CNC parts, Kawasaki, Ninja 400R 2018-, Various partsMeter Stay Extension
€12.29
Replacement meter stay extension nylon shaft. Suitable for the following models:
BPFS-0013
BPFS-0014
BPFS-0020
BPFS-0115
BPFS-0116
BPFS-0119
See table for application of meter stay extensions with our body kits:
Sprocket holder CNC black, Honda NSR250 MC21
€198.07
CNC machined TYGA sprocket holder for your NSR250 MC21R/SE/SP.
Designed and machined in house by TYGA, as a direct replacement for the ugly and heavy standard MC21 sprocket holder.
Crafted from aircraft spec 6061-T6 alloy, and supplied with bearing, seals and alloy (6061-T6) spacer, the sprocket holder is ready to fit.
Not only is this part a major cosmetic improvement, but it is only 60% as heavy as the OEM part. This means less unsprung mass, and also less rotational mass. The best case scenario.
TYGA no: TYLY-0043
SKU: hon-10393 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250 MC21, ShopO- ring for TYGA silencer 2 stroke
€4.33
O- ring for TYGA silencer 2 stroke
TYGA no: EXOR-000
SKU: alg-10116 Categories: 2 stroke exhaust sets, ALL products, Aprilia, Cagiva, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Honda, Mito 125, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, Shop, Suzuki, Yamaha, YZ250 2005-15Front fender (GRP), HRC NSR250 replica
€75.27
Front Fender, GRP, HRC NSR250 replica
Front Fender, Factory HRC NSR250 Racer Style. This front fender is designed to fit HRC factory NSR250 forks but could possibly made to fit other models with suitable mounting hardware. It is similar in styling to the front fenders used by factory riders such as Cadalora, Biaggi, Ukawa, Okada etc. in the years 1992-1995. The reason for this fender being in our line up is we were lucky enough to source some factory forks and needed a fender to go with them and wanted something as close the original as possible and designed it from photos and memory so while similar, it is not an exact replica. In any case if you look at the fenders used by HRC at that time, you can see that there are slight differences between years and bikes.
We don’t know if it will fit any other models but we know it does not fit any other front ends that we have tested it on such as NX5, RVF400, NSR50 MC18/21/28 etc.
TYGA no: BPFF-0007
SKU: hon-10942 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopGear 1st driven z=27 no.13, RGV250/RS250
€104.93
VHM insert, Aprilia RS125 (alg-10176)
piston height -0.35 mm, squish 0.90 mm. Most used is 12,0 cc.
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl