Gear change pedal assy, Honda MSX125 GROM
€37.09
Pedal Assy. Gear, MSX125 Grom
TYGA no: 24700-K26-900
SKU: MSX-10103 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopCastle nut tool, Honda MC21 NC30 NC35
€30.04
Tool to loosen/tighten the castle lock nut that secures the swingarm adjuster bolt on the NSR250 MC21. Also used for the castle locknuts on the adjusters that hold the NC30/35 engine in position. No more need for a hammer and drift, do the job properly!
Does not fit the swing arm lock nut on MC28 or NC30/35
TYGA no: TYTO-0008
SKU: hon-10521 Categories: ALL products, Honda, NSR250 MC21, RVF400RR NC35, Shop, Universal parts, Various parts, Various parts, Various parts, VFR400RR NC30Carbon seat cowling, stock shape, NXA RS250R (2001- ’08)
€908.01
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
Top Triple clamp CNC black kit , Honda NSR250 MC18/MC21/MC28
€218.46
Top Triple Clamp Set, CNC Black, NSR250
CNC machined TYGA top triple clamp with detachable ignition switch/lock holder for your NSR250.
Designed and machined in house by TYGA, as a direct replacement for the OEM top triple clamp. FEA tested and developed for increased strength without unnecessarily increased weight.
Crafted from aircraft spec 6061-T6 alloy, the top triple clamp is ready to fit.
The detachable ignition switch/lock holder is positioned to allow use of the steering lock, but can be removed for race use.
TYGA no: TYLY-1441Â
SKU: hon-10269 Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC18, NSR250 MC21, ShopShroud left Blue, Honda MSX125 GROM
€32.45
Shroud, L, Blu
TYGA no: 83490-K26-900ZE
SKU: MSX-10225 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopCNC holder carbon shark fin, Ninja 400
€21.59
CNC Holder, Carbon Shark Fin, Ninja 400
TYGA no: BPSY-0220
SKU: kaw-10134 Categories: ALL products, Kawasaki, Ninja 400R 2018-, Various partsBracket rear brake CNC black 84mm Brembo, Honda NSR250 MC28
€110.40
Bracket, Rear Brake, 84mm Brembo Conversion, Black, MC28 and NC35. Consists of main caliper bracket and spacer for the rear disc brake to get the correct clearance.
This is to fit the 84mm pitch rear caliper.
Also available in silver (TYLY-1089)
Applicable with the following Brembo model calipers:
Rear caliper P2
Code 20.6951.46
and
Rear CNC caliper P2
Code XA7.29B0
TYGA no: TYLY-1089Â
SKU: hon-10430 Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC28, RVF400RR NC35, ShopUnder Cowl, Belly Exhaust Type, (GRP), Red, MSX125
€196.87
Under Cowl, Belly Exhaust Type, (GRP), Red, MSX125
Bling up your grom with this cool component. High quality mounting hardware provided and easy to install. Although this will fit all MSX125 Groms with stock Honda or TYGA exhausts, it was designed specifically to be compatible with low mount belly exhausts including:
– Honda low mount stock exhausts supplied with the second generation 2016 MSX125SF models
– TYGA belly exhausts EXPS-0064 and EXPS-0068 (which are suitable for all model MSX125SF Groms)
See table below for more information.
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
<a href= {{media url= wysiwyg/46-undercowl-bpfl-cl-7328-online-e5eb2cb5.pdf }} target= _self >Click here for PDF</a>
TYGA no: BPFL-7328 R
SKU: MSX-10365 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, Shop