Handlebar Clamp, Left, Silver, CBR250R
€92.83
Replacement left handlebar clamp for handlebar set TYLY-0469
TYGA no: TYLY-0469L
SKU: hon-10777 Categories: ALL products, By product, CNC parts, Stock list, all modelsExhaustset stainless steel carbon silencer round, Kawasaki ZXR250
€639.76
This full race system has been specifically designed for the Ninja 250 to maximise power. Made in stainless steel with spring mounted carbon silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! (May not comply with noise regulations for some states and territories)This system is supplied with a round carbon silencer EXSL-0032
Independent Review:TYGA Ninja 250R Race Exhaust System Dyno ResultsOctober 29th, 2010 Adam2008 Ninja 250R Dyno: TYGA Round Aluminum Race Exhaust System vs. Stock ExhaustI’m a private party and this is my review of the TYGA Round Aluminum Race System. I am not a dealer, nor do I work for TYGA, but I’m a street rider and club racer. I’m reviewing this because I found little to no information regarding this system and I wanted to share my findings with others who found themselves in the same predicament as me (how can I pay less and not sacrifice performance!?!?). I scoured the internet but found no proof this system would give me any performance gains. I knew TYGA was a reputable manufacturer of quality products so I took a leap of faith and boy did it pay off!Ninja 250R Dyno results are for the following runs:Black: Stock Exhaust (no modifications whatsoever)Blue: Stock Exhaust (snorkel removed)Red: TYGA Round Aluminum Race System (snorkel removed)Note: Carbs were not jetted. Fuel mixture screws were not adjusted.P Gains:1) Remove snorkel ( 1.5HP) == 28.1HP!2) Install TYGA Round Aluminum Race System ( 4.2HP) == 32.3HP!Total: 5.7HP ( 4.2HP from TYGA exhaust!)Weight Comparison (lbs):Stock | Header: 4.1 | Can: 10.5**| Total: 14.6 lbsTYGA | Header: 3.4*| Can: 2.6**| Total: 6 lbsWeight reduction: 8.6 lbs!** does not include mounting clamp or bolt* includes all hardware – ie: springs, bung plug, manifold<iframe width="560" height="315" src="https://www.youtube.com/embed/z5hGKrpQ56c" frameborder="0" allowfullscreen></iframe>
TYGA no: EXPS-0015Â
SKU: kaw-10017 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R 2008- 12, ShopOsram light
€8.36
12V 35/35W Halogen Reverse type bulb. This is a top quality halogen replacement bulb for use with the the TYGA headlight types below. It claims to put out up to 50% more light than other bulbs.
Fitted to all our kits with compatible headlights from March 2010. Useful retrofit for TYGA kits bought previous to then. Not compatible with H4 headlights used originally on most Japanese sport bikes.
BPLT-0002
BPLT-0003
BPLT-0011
BPLT-0012
BPLT-0017
BPLT-0021
BPLT-0025
Not suitable with BPLT-0004 as used with GP250 and RGV250 GP body kits. If you need a replacement for this kit, send us an email and we will send a specific bulb for this light.
TYGA no: 62337SVS/RV
SKU: alg-10027 Categories: ALL products, Aprilia, CBR250RR MC22, CBR400RR NC23, CBR400RR NC29, Honda, MRX, MSX125 2013 - 2015, RS250, RVF400RR NC35, Shop, Universal parts, Various parts, Various parts, Various parts, VFR400RR NC30Fairing set race stock with seat, Suzuki RGV 250
€756.46
Kit, Complete Body Set, (Race), VJ22, Stock Shape
This kit comprises of parts below.
Upper Fairing
Lower Fairing
Seat Fairing
Front Fender
Screen
The fairing is a race version of the stock shape with headlight and indicator holes filled in. The lower is in one piece for simple installation and removal.
Ideal for race classes where retaining stock shape (or similar) is necessary to comply with rules. The panels are top quality, being lightweight, flexible and tough. Constructed with epoxy resin and multi layer cross weave mat; do not confuse this with budget race glass made with polyester and chopped strand just because the price is right!
This kit is supplied with clear screen. Please state if you would like a tinted screen or and we will be happy to change to suit. Same applies if you wish to substitute a different model front fender.
Please note that the fairings only weigh approx. 1kg for upper fairing panel and 1.5 for lower and 1.6 kg for seat cowling. To ensure a safe delivery, the box they are sent in weighs 4 kg.
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
TYGA no: BPFS-0140
SKU: suz-10095 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, RGV250 VJ22, Shop, SuzukiCarbon chain guard Dax
€104.89
Chain Guard, (Carbon) Stock Shape, Honda Dax. Carbon direct replacement for original part. Lighter and looks way, way cooler!
TYGA no: BPCX-7136
SKU: MKY-003 Categories: ALL products, By model, By product, Carbon, Dax and Chaly, Honda, ShopSprocket rear blank , Universal #520
€67.41
Sprocket, Rear , Blank #520, Aluminium, (Gold)
These blank #520 sprockets are designed with the custom builder/racer in mind.
Finding the correct sprockets for your special is never easy, so we’ve done the hard work for you. All that’s left to do is turn out the center and drill the mounting holes.
Designed and machined in house from super strong 7075 T6 aluminium, and then anodized in gold colour for superior corrosion and abrasion resistance.
We advise seeking the advice of an experienced machine shop for truing up the sprocket prior to machining the center bore and mounting holes to ensure perfect concentricity and bolt fitting.
Set, Pipe, Twin Exit System, High Level, MSX125 2021-, Moto Maggot
€769.95
Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-
Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.
See also BPFF-7142 for GRP version.
*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.
Fuel Tank, GRP “Painted red/white”, HONDA RVF400 NC35
€1,542.37
Seat Cowling, (GRP), NC30/NC35 GP-T
This product is the latest TYGA design for the 400 V4 and is designed to be stylish and lightweight. This product includes ONLY the seat cowling for replacement in the event of an accident or can be used for a project bike of another model. For the MC21, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessay parts to complete the modification. For installation of any other model the customer will need to make the necessary modifications,
BPFS-0148 (GRP, NC30)
BPFS-0149 (GRP, NC35)
BPFS-0150 (Carbon, NC30)
BPFS-0151 (Carbon, NC35)
The advantages of this seat cowling over stock include:
– use with rest of seat cowling kit, much lighter than stock
– new design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9133).
– higher at the rear, to give the bike a more agressive stance
– better rider control by use of enclosed seat area
– improved strength with precision in design and fitment
Tyga Performance Compatible Parts for this Product:
This product is compatible with:
BPFX-9034 and BPCX-9134 Undertray, NC30/NC35 GP-T
TYLY-0133 Subframe, NC30/NC35 GP-T
TYLY-0130 Batterybox NC30/35 GP-T
BPFX-9234 Seat Support, NC30/NC35 GP-T
BPSP-0006 Seat Pad, GP-T
BPAC-0001 Rear Brake Reservoir Kit,
BPLT-0009 LED Taillight
BPFX-9133 Registration Plate Holder GP-T
TYGA no: BPFG-0008red/white
SKU: hon-11365 Categories: ALL products, Bodywork, Bodywork and carbon, RVF400RR NC35