Section, Secondary B, R.H Exit, VFR750F, 3rd Gen, 90-93
€107.88
TYGA no: EXPT-8151
SKU: hon-11343 Categories: ALL products, Exhausts, Honda, Shop, VFR750F Gen 3 90-93Fuel Tank, GRP, NSR250, MC21, Painted Rothmans
€1,304.96
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: BPFG-0004Painted
SKU: hon-11281 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, NSR250, NSR250 MC21, Shop, SilencersSubframe aluminium , Honda VFR400 NC30
€453.76 €408.41
This lightweight aluminium subframe is closely modelled on the stock NC30 subframe and can be substituted for the heavy steel one with a considerable weight saving . Made from extruded and CNC machined 6000 series aluminium, this product is hand-welded by our craftsmen to provide a strong, accurate and beautiful component. Finished in Hard wearing satin black powdercoating, it can be painted if the customer so chooses.
Note this subframe is for race and single seat use only and cannot be used for carrying a passenger. All mounting positions for exhaust stay, seat cowling, undertray, rear shock reservoir (BPCC-0046 is a direct fit), radiator overflow bottle, electrical components etc which are normally mounted to the subframe are supplied with subframe so it is almost a simple plug and play. Most of the standard fasteners are used, however where necessary, replacements are included.
If you wish to run this subframe without the rear fender, then this is also possible and we recommend installing it along with Seat cowling bracket part number: TYLY-0224-17 and battery box TYLY-0026. In this configuration, you will need modify the rear mounts of the battery box and drill them to attach to the subframe and to cable tie the ECU, starter relay etc which are normally attached directly to the undertray.
TYGA no: TYLY-0224
SKU: hon-10984 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, Shop, Various parts, VFR400RR NC30VHM Cyl. headset Suzuki RM125 ’05-
€271.95 €256.04
VHM Cyl. headset Suzuki RM125 ’05-> (alg-10204) AA33078
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.We are pleased that we can offer VHM products on our website.VHM produces exchangeable cylinder heads for two-stroke engines in motocross and road racing. With the experience gained in two-stroke tuning, VHM develops products of high quality.During intensive tests, on the racetrack as on the VHM dyno, the cylinder head showed a better temperature development in the cylinder head. A lower engine temperature followed. The explanation of this phenomenon is the use of a special aluminum alloy which has a very good heat transference. Another advantage of the material is its resistance to detonation.The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring designThis head set comes with following parts:1x cylinder head1x standard insert (11.20cc)Optional inserts:– blind– 10.80– 11.00– 11.40This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.Note: please put in comment box, the year of your bike and what size insert you want (no comment is STD insert).Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
TYGA no: AA33078Â Â Â Â Â Â Â Â
SKU: alg-10204 Categories: ALL products, Motocross, Shop, Suzuki, Suzuki MX, VHM productsUndertray MiniRacerXtreme, Honda MSX125 GROM
€65.30
Bodywork Set, (GRP), MRX, MSX125 GromThis kit is the ultimate modification for your MSX125 Grom converting it to a mini racer for the road or track depending on how the mood takes you. The kit is comprehensive and is supplied with all mounting hardware and components including, headlight, handlebars, top triple clamp and mirrors*.The panels are made from high quality GRP using high quality epoxy resins for strength and lightness and are primed ready to apply paint. The shape lends itself to most liveries and ideal for promoting your business or race team.With improved ergonomic and aerodynamic performance, this kit will increase top speed and agility as well as give a whole new riding experience for the MSX125 Grom. Ideal for buddying road racers for honing racecraft and riding skills, or just a fun project to stand out from the crowd, the MRX will put a smile on everyone’s face.*Note, turn signal indicators, tail tidy, front fender are not included with kit but are available on this site. We recommend installation of rear sets and exhausts but they are not strictly necessay.Our MRX set only fits the first model MSX 2013-16<iframe width= 560 height= 315 src= https://www.youtube.com/embed/8eiU-sMhpRI frameborder= 0 allowfullscreen></iframe>
Exhaust stay Tyga, Aprilia RS250
€61.11
This product is to be used exclusively with our TYGA Seat cowling kits for the Aprilia RS-250. These include BPFS-0102, BPFS-0103.
This stay is designed to mount to The TYGA Aprilia RS-250 subframe TYGLY-0065 and secure the silencers of the the exhaust system. Will secure TYGA silencers and possibly others (we have no information on this) and because they are not ‘handed’ you can use them for both left and right sides. One stay is supplied in the kits and is sufficient if the motorcycle being fitted has the silencers stacked on the right side. (TYGA GP Style). If the motorcycle has side by side silencers with one exiting on the left and another on the right, it will be necessary to order an additional exhaust stay for the left side silencer. The subframe has securing points and all you need to do is to trim the undertray of the seat cowling in order to fit.
TYGA no: TYLY-0064
SKU: apr-10049 Categories: ALL products, Aprilia, Bodykit replacement parts, Bodywork, RS250, ShopCarbon ignition cover, Yamaha R6 2006 – 12
€67.43
Ignition Cover (Carbon) 2006-12 Yamaha R6
TYGA no: BPCC-7302
SKU: yam-10010 Categories: ALL products, Carbon, Shop, Yamaha, YZF-600 R6 2006- 7, YZF-600 R6 2008- 12Racing stepkit black/BLUE adjustable, Honda MSX125 GROM
€477.27 €395.87
Racing Rear Set Kit, Adjustable, black with BLUE Slot Cover, MSX125 Grom
With all major components desgined specifically for the MSX125 Grom in mind, this rear set kit is the best on the market. Designed in-house by TYGA Performance using the latest CAD/CAM software, these tough CNC machine-made step kits are made from top quality, aircraft grade aluminium and utilise TYGA’s unique and elegant system to provide ten different foot peg positions. The kit features levers moving on ball bearings to give precise and smooth movement. In addition to the technical specifications, emphasis has also been given to make the steps as uncluttered as possible with the rear master cylinder hidden from view and no unsightly unused holes on view etc. The kit comes complete, ready to bolt on with stainless steel fasteners and carbon heel guards. With individualism in mind, there is a choice of ten colour combinations available and all components are available as replacement or separate items. Be sure to order the correct colour combination. Some photos below are for reference and show different colours to this product.
Note, no real brake light provision. If required, we recommend installation of inline pressure switch.
You can only use these steps on the MSX125SF if you have a TYGA exhaust
<a href= {{media url= wysiwyg/05-fitting-msx-step-kit-online-6e1bce74.pdf }} target= _self >Click here for fitting instructions</a>
TYGA no: STAA-1019BLUE
SKU: MSX-10242 Categories: ALL products, CNC parts, Honda, MSX125 2013 - 2015, MSX125 2021-, MSX125SF 2016 -2020, Shop, Steps, Steps