Headlight Tyga eyes III
€183.10
This sleek integrated double headlight unit uses OSRAM 35/35 Halogen bulbs and modern reflector and refractor technology . Comes complete with loom and is ready to plug in. This is suitable for the TYGA Performance fairing BPFU-9218 and BPCU-9218
TYGA no: BPLT-0012
SKU: alg-10028 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, CBR250RR MC22, Honda, RVF400RR NC35, VFR400RR NC30Set pipe Stainless full race system “round aluminium silencer”, Kawasaki ZXR400L
€827.77
Set, Pipe, Stainless, Full Race System, Round Aluminium Silencer, ZXR400L
This race system has been specifically developed for the Kawasaki ZXR400L models (L1 up to L9) and has been designed for optimum performance. Linked header pipes for better cylinder filling efficiency over a wide rpm range, and a 4-1 collector allowing maximum power and tuning potential. Made from TIG welded stainless steel sections throughout, with all joints secured by springs. It uses a 450 mm long aluminium round silencer to keep sound to a minimum. As well as the improved performance, it saves weight over the stock system and of course, it looks awesome!
Compatibility:
This exhaust can be installed on a bike fitted with the stock or with race bodywork and with or without the passenger pegs installed.
The oil cooler system can be retained. No modifications required.
Please also see EXPS-0137, EXPS-0139 and EXPS-0140 for similar system.
VHM Cyl. Headset Husqvarna TC/TE 125 ’16 –
€271.95 €255.63
VHM Cyl. Headset Husqvarna TC/TE 125 ’16 -> (alg-10221)
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design
This head set comes with following parts:
1x cylinder head
1x standard insert (11.60cc)
Optional inserts:
– blind
– 11.20
– 11.40
– 11.80
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Note: please put in comment box, the year of your bike and what size insert you want (no comment is STD insert).
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
Top Triple clamp nut M33, NC30
€19.05
Top clamp nut machined from 7075 T6 aluminium. Light weight and good looking. Clear anodised for a long lasting finish.
This nut is a direct replacement to the top nut on many Honda machines, such as NC30 VFR400R, RS250, RC30 VFR750R. The list is long.
TYGA no: TYLY-0037
SKU: hon-10116 Categories: ALL products, CNC parts, CNC parts, Honda, RS250R NF5 / NX5, Shop, Various parts, Various parts, VFR400RR NC30, VFR750R RC30Exhaustset race Stainless steel carbon Silencer round, NC30 NC35
€1,155.40
Exhaustset race Stainless steel no Silencer, NC30 NC35
The TYGA Full Race System has been designed with maximum power mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits both the NC30 and NC35. Most systems are not designed to be used with a side stand on the NC30, but the TYGA system can be used with a side stand on both the NC30 and NC35.
For unsurpassed looks, sound and performance, this system can be used with any of our 400 system exhaust silencers.
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing only half the weight of the stock system makes for a weight saving of4.2 kg.
NC35:
First, an NC35 was tested with the original Honda exhaust system and produced a peak of 53.5hp; about the right number for a stock bike.
Then the pipe was changed for the TYGA full stainless system, and the main jets increased one size from stock front and rear. No other changes were made, and the peak hp increased to 59.9hp, a gain of 6.4hp (Over 8% more power!)
NC30:
On the NC30, the advantage over the stock exhaust system is higher. With just the TYGA pipe and a couple of main jet changes, the power leaps from a stock 52hp up to a healthy 59hp. That’s 7hp, or 13.5% more.
The pipe set can be used with any silencer with a2 inch internal diameter bore which is held in place by springs for ease of fitment and removal. TYGA provide the following compatible silencers which can either be ordered separately with this system or together as a set.
For unsurpassed looks, sound and performance, this system is supplied with silencer EXSL-0012.
This system may not comply to specific country noise emission regulations and is not homologated for street use.
TYGA no: EXPS-0010
SKU: hon-10103 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, VFR400RR NC30Cowling center Blue, Honda MSX125 GROM
€17.03
Cowl, Center, RR., Blue
TYGA no: 77230-K26-900ZE
SKU: MSX-10227 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopCarbon tank shields, Yamaha R6 2006-7
€258.68
This product replaces the cheap looking plastic panels which fit between the frame and the tank on the R6. This product comprises one left and one right panel which can be fitted in minutes. Front part held in place by Velcro provided.
TYGA no: BPCC-7409
SKU: yam-10023 Categories: ALL products, Carbon, Shop, Yamaha, YZF-600 R6 2006- 7Stay standard, side cowl Right, Honda VFR400 NC30
€21.43
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: BPSY-0325R
SKU: hon-11413 Categories: ALL products, Bodywork and carbon, Carbon, Honda, Shop, Various parts, VFR400RR NC30