Bike cover Honda
€58.87
Genuine Honda Bike Cover, fitted with elastic for secure installation. I supplied with its own storage pouch.
TYGA no: 08P34-KPP-700
SKU: hon-10474 Categories: ALL products, CBR1000 2004-7, CBR1000 2008-11, CBR1000 2012-, CBR125R/CBR150R 2004-10, CBR125R/CBR150R 2011-, CBR250R 2011 - 15, CBR250R MC19, CBR250RR MC22, CBR300R 2014-, CBR400RR NC23, CBR400RR NC29, CBR500R, CBR600RR 2003- 4, CBR600RR 2005- 6, CBR600RR 2007- 16, CBR900RR 1992- 95, Honda, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, PCX150, RS250R NF5 / NX5, RVF400RR NC35, Shop, Universal parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30, VFR750R RC30, VTR1000Sp1SP2Upper/meterstay race, Kawasaki Ninja 400 2018-
€233.78
Replacement Upper/Meter stay part of set TYLY-0216
TYGA no: TYLY-0214
SKU: kaw-10152 Categories: ALL products, Bodywork and carbon, Kawasaki, Ninja 400R 2018-Set, Pipe, Full Race System, High Level, MSX125 2021-, Stainless Oval/Carbon End Cap
€567.59
Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-
Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.
See also BPFF-7142 for GRP version.
*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.
Bracket front brake CNC black 84mm Brembo, Honda MSX125 GROM
€33.06
Bracket, Front Brake, 84mm Brembo Conversion, Black, MSX125 Grom
This is to fit the 84mm pitch rear caliper.
Also available in silver (TYLY-0098)
Applicable with the following Brembo model calipers:
Rear caliper P2
Code 20.6951.46
and
Rear CNC caliper P2
Code XA7.29B0
Only suitable for the non ABS models
TYGA no: TYLY-1098
SKU: MSX-10126 Categories: ALL products, CNC parts, CNC parts, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopClamp, Manifold, NC30/35
€18.96
Manifold Clamp. Fitted to rear cylinder port. For use with:
EXPS-0002 Set, Pipe, Full Race System NC30-35 (No Silencer)
EXPS-0011 Set, Pipe, Full Race System NC30-35 Maggot Silencer
EXPS-0028 Set, Pipe, Full Race System NC30-35, Oval Carbon/Carbon End Cap Silencer
EXPS-0012 Set, Pipe, Full Race System NC30-35, Oval Stainless Silencer
EXPS-0053 Set, Pipe, Full Race System NC30-35, Round Aluminium Silencer
EXPS-0010 Set, Pipe, Full Race System NC30-35, Round Carbon Silencer
EXPS-0026 Set, Pipe, Full Race System NC30-35. Round Carbon/Carbon End Cap Silencer
EXPS-0003 Set, Pipe, Twin Stack System, Carbon Silencers
EXPS-0005 Set, Pipe, Twin Stack System, Stainless Silencers
TYGA no: EXMC-0008a
SKU: hon-10854 Categories: ALL products, Exhausts, Exhausts, Exhausts, Stock list, all modelsManifold, Left, Ninja 250/300
€29.65
This is a replacement part. When ordering an exhaust system, this item is included in the price and you do not need to order this parts separately.
Compatible with the following TYGA systems:
EXPS-0047, EXPS-0048, EXPS-0049 and EXPS-0050
Triple clamp set CNC black, Honda NSR250 MC18/MC21
€673.57
CNC machined TYGA triple clamp set for your NSR250 MC21.
These stylish, all aluminium triple clamps are a direct replacement for the MC21 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!
They are delivered ready to fit with all bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-1241Â
SKU: hon-10265 Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC18, NSR250 MC21, ShopUpper cowling street RVF, NC35
€284.65
Stock shaped GRP upper fairing, comprising the upper and two side inspection covers of the OEM plastic panels. Supplied with light holes and light fittings. Race version (BPFU-0009) also available.
Suitable with BPFL-0003 stock shaped lowers.
See also kits BPFS-0069 and BPFS-0070.
TYGA no: BPFU-0029
SKU: hon-10147 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35, Shop