Silencer stainless round, WSS300 (race) system, KTM RC390
€384.78
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXSL-0174p
SKU: ktm-10144 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsCarbon set, rear hugger and chain guard, KTM RC125/200/390
€235.46
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: BPFS-0226
SKU: ktm-10205 Categories: ALL products, Bodywork and carbon, Exhausts, KTM, RC390 2022-, Stock list, all modelsCarb Service Kit, 12 pieces, Honda NSR250 MC28
€43.36
Carb Service Kit, 12 pieces, Honda NSR250 MC28
LiteTek Carburettor Seal Kit to suit: Honda NSR250 MC28
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
2x FB-032 Float Bowl Seal, Material: Flourosilicone (Part of Honda kit: 16010-KV3-950)
2x FB-033 Top Cap O-Ring, Material FKM (Part of Honda kit: 16010-KV3-950)
2x OR-009 Drain Screw O-Ring, Material: Viton 70A (Part of Honda kit: 16010-KV3-950)
2x OR-014 Fuel T-Pipe O-Ring, Material: Viton 70A (Part of Honda kit: 16010-KV3-950)
2x OR-012 Float Bowl Vent O-Ring, Material: Viton 70A (Part of Honda kit: 16010-KV3-950)
2x CS-005 Choke Plunger Cap Material: Viton 70A (Part of Honda kit: 16046-KV3-950)
TYGA no: CKA-Honda-MC28
SKU: alg-10367 Categories: ALL products, Carburettor Service Kits,, Honda, NSR250, NSR250 MC28, Various partsTYGA bike dust cover Black/red “CBR250RR”
€68.13
TYGA Bike Dust Cover, Red, HRC (street)
This cover is handmade from 100% breathable polyester and ideal for an indoor dust cover. Suitable for sports bikes from 125cc to modern 1000cc. sportsbike, the cover features a pull-string around the bottom to secure it in position, comes with its own storage pouch and is machine washable.
See also TMER-0137 for the “Race” version of this TYGA bike dust cover for (race) bikes with no mirrors
Also available in Black see TMER-0123 and TMER-0124
Note, this is for indoor use only. For a weatherproof cover, see 08P34-KPP-700 Honda Bike Cover.
TYGA no: TMER-0122
SKU: hon-11072 Categories: ALL products, Bike covers, CBR250RR 2017, CBR250RR MC22, Honda, Merchandise, Shop, Universal partsNGK sparkplug BR9ECMIX, Suzuki RGV250 / Aprilia RS250
€22.00 €18.87
NGK’s Standard Plugs are Constructed for Longer Life and Optimum Performance.
TYGA no: NGKBR9CMIX
SKU: alg-10166 Categories: ALL products, Aprilia, High performance, High performance, High performance, High performance, High performance, High performance, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, RGV250 VJ21, RGV250 VJ22, RS250, Shop, Suzuki, Various partsExhaust set stainless steel, Aprilia RS125
€355.59
.Set, Exhaust Chamber, Stainless Steel, Aprilia RS-125
Cone welded stainless steel exhaust, for your RS125 performance and look!
The TYGA Performance Aprilia RS-125 Stainless Steel chamber, when used with a TYGA silencer, offers huge saving in weight and increase in power over the stock system. The handcrafted cones are TIG welded together to show the weld rings to maximum affect; this system is a must for the Aprilia RS-125 owner and fits all versions up to and including 2011
This products is the chamber set only and to complete the full replacement exhaust system for your Aprilia RS125 you will need to order a silencer too.
Included in this product:
A.)1 X chamber set (EXCS-0013 or EXCS-0019). When you order this product, you will receive included in the chamber set:
1 X chamber
1 X manifolds with flange and ‘o’ring
2 X manifold to chamber springs
1 X clamp and mounting hardware
Not included in this product is the silencer. Please order separately:
B.)1 X silencer (EXSL-0003, EXSL-0004 OR EXSL-0005) of your choice. Each silencer is provided with mounting hardware and will have a badge attached on the correct side for this system when ordered at the same time.
As is the case with any power upgrade, it is important that you make adjustments to the carburation as necessary. The dyno graph shown had the jetting adjusted one size leaner on the main jet and one clip richer on the needle for optimum performance. However, you will need to adjust your bike’s settings according to your ambient condition. If in doubt, start with a rich setting across the range, and lean off as required. Failure to correctly set up the carburation could result in engine damage.
TYGA no: EXCS-0019Â
SKU: apr-10002 Categories: 2 stroke exhaust sets, ALL products, Aprilia, Exhausts, Exhausts, RS125, ShopUpper stay GP-T, Honda VFR400 NC30
€93.23
Upper Stay, NC30, GP-T, Assy.
Lightweight GP style upper stay complete with bolts and mounting hardware.
Compatible Parts
TYGA upper cowlings, BPFS-0144 and BPFS-0146
TYGA no: TYLY-0138
SKU: hon-10590 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, VFR400RR NC30Carbon upper cowling race TYGA, Suzuki RGV 250
€742.02
One of our most popular bodykits from last years.
This kit comprises of the parts shown in the picture which are also available separately.
Light and strong, update your RGV250 with these great parts.
* A clear screen is provided unless you specify tinted in the comment box at check out
This kit is supplied with all additional fasteners required to mount it to a stock VJ22
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
TYGA no: BPCU-9126
SKU: suz-10227 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, RGV250 VJ22, Shop, Suzuki