Carbon Kit, Fairing Set, Honda NX5 RS250R (ram air)
€2,468.27
Kit, Fairing Set, Carbon, Honda NX5 RS250R (Ram Air)
Complete Carbon Bodywork kit which consists of the following products:
Upper Cowling Race, Carbon, NX5 RS250R (Late Model Style) (BPCU-9036)
The Carbon upper fairing is modelled off the last version of the NX5 RS250R but will fit any NX5 which has the ram air through the fuel tank system.
Lower Cowling, Carbon, NX5 RS250R (Late Model Style) (BPCL-9036)
The Carbon lower fairing is modelled off the ram air version of the NX5 RS250R but will fit any NX5 which uses a stock upper as far as we can tell.
Seat Cowling Race, Carbon, NX5 RS250R (1995 NSR250 Style) (BPCT-9036(p))
Although the late model stock shape NX5 RS250R works well, to our eyes it is a bit lacking in lines and we prefer the 1995 factory NSR250 racer look as ridden by Ukawa, Okada, Romboni, Jacque etc. We therefore decided to make a similar style seat cowling which would be a direct fit for the NX5. The seat cowling uses a lightweight aluminium stay to relocate the rear mounting bolts from the sides to the seat pad area and is covered underneath for streamlining and protection of the PGM and connectors.
Seat Support, Carbon, NX5 RS250R (BPCX-9036)
Screen Clear NX5 RS250R (Late Model Style) (SCRE-0168)
Made to order, takes approx 1 to 2 weeks to be ready for shipping
TYGA no: BPFS-0177
SKU: hon-10948 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopSet exhaust without header, race system without silencers
€409.54
This race system has been specifically developed for the KTM RC390 to maximise performance and looks. The dual underseat system eliminates any issues with ground clearance unlike some other systems on the market. In addition, in the event of an accident the exhaust is well protected. Other systems which have the exhaust exiting the right side of the swing arm will usually suffer terminal damage.
Compatiblity: This exhaust can be installed on a bike fitted with the cup race bodywork or standard, with passenger pegs installed or removed. It can be installed with stock registration/turn signal holder.
** Attention ** if you have the EURO 4 type RC390 2016, this means with the exhaust on the right side, not the exhaust under the engine. This exhaust won’t fit, because the header is different. You need to order the full system. Please see product: ktm-10092 / ktm-10093.
For use with stanadard belly pan, we recommend the installation of the exhaust outlet cover BPFC-7431, and for use without passenger pegs, option carbon exhaust guards are available BPCC-0021L and BPCC-0021R.
Please also see EXPS-0061, EXPS-0062, EXPS-0091 and EXPS-0092 for systems complete with silencers.
TYGA no: EXPS-0093
SKU: ktm-10094 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, KTM, RC 390, ShopLower cowling RCV211, NC35
€187.52
This lower cowling is part of a set of bodywork BPFS-0013, BPFS-0014, BPFS-0033
TYGA no: BPFL-9118
SKU: hon-10148 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35, ShopCarbon air duct T13, Honda RVF400 NC35
€123.60
This air duct is a direct replacement for the carbon version which is supplied with our T13 style fairings BPCU-9218 and BPFU-9218
TYGA no: BPCX-9208
SKU: hon-10317 Categories: ALL products, Bodykit replacement parts, Bodywork and carbon, Carbon, Honda, RVF400RR NC35, ShopSet, Pipe, Full Race System, High Level, MSX125 2021-, Stainless Oval/Carbon End Cap
€567.59
Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-
Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.
See also BPFF-7142 for GRP version.
*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.
Spring puller (type 1) , universal
€30.24
Handy, tough, spring puller ideal for removal of exhaust mounting springs in those difficult to get places. Say goodbye to slipping vice grips and twisted strands of wire.
Also gives your race pit a professional edge for that psychological advantage over the competition!
A must for every workshop!!
TYGA no: TYTO-0017
SKU: alg-10009 Categories: 2 stroke exhaust sets, 4 stroke exhaust sets, ALL products, By product, Cagiva, Exhausts, Exhausts, Honda, Mito 125, MSX125 2013 - 2015, MSX125SF 2016 -2020, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, RD350LC 4L0, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, Shop, Suzuki, Tools, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30, Yamaha, YZ250 2005-15Front fairing street RC211V TE2, NC30 NC35
€152.82
This a replacement part for bodywork set BPFS-0013
TYGA no: BPFU-9118F
SKU: hon-10151 Categories: ALL products, Bodykit replacement parts, Bodywork and carbon, Honda, RVF400RR NC35, ShopFront fork preload adjuster black/gold (pair), Ninja 400
€194.60
Front Fork Preload Adjusters, Pair, Ninja 400
These fully functional preload adjusters replace the blank end caps on the stock Ninja 400 front suspension. These caps allow the rider to increase the amount of preload on the internal springs, allowing for a better set up for your riding style or conditions. Essential for spirited riding through the twisties or track days and racing.
This modification allows preload to be increased from the stock setting by 12mm. The minimum setting gives the same preload as stock.
Supplied in black and gold anodised finish, these adjusters are as beautiful as they are functional.
TYGA no: TYLY-1099
SKU: kaw-10132 Categories: ALL products, Exhausts, Kawasaki, Ninja 400R 2018-, Various parts