Complete Bodykit set Type 10 Red, Honda MSX125 GROM
€329.98
Complete Bodywork Set, MSX125, Type 10, 2015 Valentine Red Scheme. Transform your bike! Easy and fun to install. With this product, you can afford to have a change of clothes for your beloved MSX125/Grom. Suitable for all models from 2013-2015
This set comprises of a complete set of all the OE Honda panels and decals shown in the photos below for the MSX125. Note it includes the decal ‘MSX125’ not ‘Grom’ as used in some markets. These are all genuine Honda products and not nasty Chinese knockoffs!
TYGA no: BPFS-7028Y
SKU: MSX-10310 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopSprocket holder CNC black, Honda NSR250 MC21
€198.07
CNC machined TYGA sprocket holder for your NSR250 MC21R/SE/SP.
Designed and machined in house by TYGA, as a direct replacement for the ugly and heavy standard MC21 sprocket holder.
Crafted from aircraft spec 6061-T6 alloy, and supplied with bearing, seals and alloy (6061-T6) spacer, the sprocket holder is ready to fit.
Not only is this part a major cosmetic improvement, but it is only 60% as heavy as the OEM part. This means less unsprung mass, and also less rotational mass. The best case scenario.
TYGA no: TYLY-0043
SKU: hon-10393 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250 MC21, ShopCarbon seat cowling, stock shape, NXA RS250R (2001- ’08)
€908.01
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
Upper cowling (GRP) NX6, NSR500V
€299.78
Frame Cover, Pair, Carbon, RGV250 VJ21 (Frame without Steering Damper)
These lightweight carbon covers fit over the frame and they are designed to protect against scratches and damage to the frame in the event of an accident.
Note that some examples of the VJ21 had no steering damper mounting boss. Also some other frames have the steering damper mounting boss in a different position. For those frames, ypou also can ise thsi set this set and cut a hole to suit.
See also Set: BPCC-7021 Frame Cover, Pair, Carbon, RGV250 VJ21 (Frame with Steering Damper)
Set, Exhaust chamber Stainless steel, Gp-T Type, Honda RS250R NX5
€750.67
Set, Exhaust Chamber, GP-T Type, Stainless Steel, NX5 RS250R
It is no secret that we love our two strokes here at TYGA, especially ones built by HRC and we regularly use our NX5s whenever we have the opportunity. So we have a very personal reason to produce an exhaust system for the NX5 and spent months to design and build the system we have always wanted. Using computer software data and a lifetime of experience and knowledge, this exhaust system has been rigorously dyno and track tested by TYGA Performance to give you the best NX5 system on the market.
With no compromises in time and materials, the chambers are accurately laser cut, hand rolled and welded in 304 stainless steel by our top craftsmen to make a world-class product. Not only does this system perform, it looks the part too from its exquisite welding, to the routing and the HRC style spring mounted silencers. Every effort has been made to give maximum clearance for lean angle and spring mounting and being made from stainless, is easy to maintain. Whether you are parading your RS250 or want to win races, the TYGA system will not disappoint. Available from stock and with a reliable source of spare parts and customer service support and knowledge, the TYGA Performance NX5 exhaust is available with a choice of three silencer types, carbon, carbon/Kevlar and aluminium. Be sure to order two silencers (EXSL-0068, EXSL-0069 or EXSL-0070) with every chamber set, (EXCS-0039)
Note, we have replacement chambers available individually (EXCB-0039L and EXCB-0037R)
Note, this system uses the stock NX5 manifolds and uses the RS type springs (not included) The right side is supplied with a stay and bolt which uses the stock NX5 mounting rubber and hardware to mount on the back side of the chain roller is shown in the photos.
TYGA no: EXCS-0039
SKU: hon-10897 Categories: ALL products, CNC parts, Exhaust, Honda, RS250R NF5 / NX5, ShopBracket rear brake CNC silver 84mm Brembo, Suzuki RGV250 VJ23
€110.40
Bracket, Rear Brake, 84mm Brembo Conversion, Silver, VJ22 and VJ23.
This is to fit the 84mm pitch rear caliper.
Also available in black (TYLY-1090)
Applicable with the following Brembo model calipers:
Rear caliper P2
Code 20.6951.46
and
Rear CNC caliper P2
Code XA7.29B0
Mirror blanking plate silver, 30mm
€40.73
Handy mirror blanking plates for your 250/400 sportsbike.
No need for ugly cable ties on those all important track days. These CNC machined blanks will secure your cowling and keep you looking stylish.
Mounting pitch is 30mm, so will fit many models.
2x Mirror Blanking plates and 4x stainless bolts are supplied, but you can use your standard mirror mounting nuts to secure.
TYGA no: TYLY-0056
SKU: alg-10127 Categories: ALL products, Honda, NSR250 MC21, NSR250 MC28, RGV250 VJ22, RVF400RR NC35, Shop, Suzuki, Universal parts, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30Carbon seat set street, Aprilia RS250
€1,203.58
Due to popular demand, our GP seat cowling kit is now available in carbon. These panels are both lighter and stronger than GRP. Finshed in three layers of tough clear coat to protect against UV light, they are ready to use and don’t require painting.* This kit comprises of the parts shown below which are also available separately.
*Please note, does not include front fairing kit which can be ordered, code BPFS-1100. Graphics shown in photos are not included.
This kit is supplied with all additional fasteners required to mount it to a stock Aprilia RS-250
If you have left and right exiting chambers (side by side) you will need to add 1 X exhaust stay to your order (Only one supplied in kit for twin right exiting chambers)
For Aprilia RS250 MK1 owners, you can use this fairing but it’s not a direct fit.
The dash is different, the digital meters (MK2) fits the TYGA frame.
Tank MK1 looks the same but is little different. The seat needs adjustment the tank is a little bigger.
The cooling- and oil tank are in the sub frame (MK1) and on the side of the frame MK2.
The steps left and right of the MK2 have extra brackets, the MK1 don’t have these. You need this fot the lower TYGA cowling.
TYGA no: BPFS-1102
SKU: apr-10068 Categories: ALL products, Aprilia, Bodywork and carbon, Carbon, RS250, Shop