Aluminium wheel spacer kit “silver” , KTM Duke – RC125/RC200/RC390
€52.47
Wheel, Aluminium Spacer Kit, KTM Duke – RC Series
Update your bike with this great TYGA performance, KTM power part!!
This comprehensive kit is specifically designed for the KTM racer in mind. The wheel spacers have been cleverly designed to be captured in the seals (instead of being loose as they are with stock set up), enabling quick and easy wheel removal and installation; essential when every minute counts to get out in time for a session or race.
In addition, the spacers are all made out of high quality aluminium (6061-T6) instead of steel giving a useful saving of 65% in important unsprung weight.
Finally, we provide a complete set of high quality Japanese Koyo wheel bearings to replace the not so good ones supplied from the factory.
All in all, a useful and inexpensive upgrade. Now you really are ready to race!
Included in this kit are the following components:
Bearings
front wheel x 2
rear wheel x 2
sprocket carrier x 2
seals
front wheel x 2
rear wheel x 2
spacers
front wheel, left, right and centre
rear wheel, left, right, centre and sprocket carrier
Note: This product is only sold as a complete kit, and individual items are not available separately, sorry.
TYGA no: TPER-1003
SKU: ktm-10186 Categories: ALL products, CNC parts, CNC parts, CNC parts, Duke 125/200 2012- 16, Duke 125/200 2017 -, Duke 390 2012-16, Duke 390 2017 -, KTM, RC 125/200, RC 390, Shop, Various partsTyga Step Kit Replacement Link Rod, Female, 215 mm.
€13.99
Tyga Step Kit Replacement Link Rod, Female, 215 mm.
Uses M6x1 female thread in one end and M6x1 L/H female thread in the other. 215mm in length.
Lower triple clamp CNC silver, Honda NSR250 MC18/MC21/MC28
€364.10
Lower Triple Clamp, CNC Silver, NSR250
CNC machined TYGA lower triple clamp for your NSR250.
Designed and machined in house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
This product does not include headstock seals or bearings. T
This product is also sold as part of a set TYLY-0241, Triple Clamp Set, CNC Silver, NSR250.
TYGA no: TYLY-0341Â
SKU: hon-10262 Categories: ALL products, CNC parts, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, ShopTurn signal relay, 2 pin
€9.98
Electronically speed controlled flasher relay especially designed to be used with LED turn signals. This unit will flash at the correct speed regardless of the wattage of the turn signals so it can be used with stock fronts and LED rears, all LEDs or even all stock. We’ve tested these 12 volt 21Watt front bulbs with our BPLT-0023 mini LED turn signals and they perform perfectly.
Check if your bike has a 2 pin Relay!
TYGA no: TELC-0001
SKU: alg-10122 Categories: 848 / 1098 / 1198, ALL products, Aprilia, Cagiva, CBR1000 2004-7, CBR1000 2008-11, CBR1000 2012-, CBR125R/CBR150R 2004-10, CBR125R/CBR150R 2011-, CBR250R 2011 - 15, CBR250R MC19, CBR250RR MC22, CBR300R 2014-, CBR400RR NC23, CBR400RR NC29, CBR600RR 2003- 4, CBR600RR 2005- 6, CBR600RR 2007- 16, CBR900RR 1992- 95, Ducati, Duke 125/200 2012- 16, Duke 390 2012-16, ER6N-F 2009-11, GSX-R1000 K5-K6, GSX-R1000 K9-K10, GSX-R1300 Hayabusa, GSX-R1400 Hayabusa, GSX-R600/750 K6-K7, GSX-R600/750 K8-K10, Honda, Kawasaki, KSR110 2005- 10, KTM, Mito 125, Monster, MSX125 2013 - 2015, MSX125SF 2016 -2020, Ninja 250R 2008- 12, Ninja 250R/300R 2013 -, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RC 125/200, RC 390, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, RSV125, RVF400RR NC35, Shop, Suzuki, Universal parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30, VTR1000Sp1SP2, Yamaha, YZF-1000 R1 2002- 6, YZF-1000 R1 2007- 8, YZF-1000 R1 2009- 14, YZF-600 R6 2006- 7, YZF-600 R6 2008- 12, YZF-R125 2009-, YZF-R25/R3, Z125 2016-, ZX10R 2011 -15, ZXR250CSeat set race, Honda NSR250 MC28
€481.20
This set of bodywork is designed to replace the stock seat cowling with the street version of our GP Race Seat cowling and includes all parts needed to do the conversion. The kit comprises the parts below which are also available separately.
We make four versions of our NSR250 GP Race seat cowling for use in 8 different race and street sets. . For the MC21 and MC28, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessary parts to complete the modification.
BPFS-0003 (street)
BPFS-0004 (race)
uses BPFT-9002 MC21 with carbon front section
BPFS-0059 (street)
BPFS-0060 (race)
uses BPFT-9102 MC21 all GRP construction
BPFS-0004 (street)
BPFS-0005 (race)
uses BPFT-9012 MC28 with carbon front section
BPFS-0045 (street)
BPFS-0046 (race)
uses BPFT-9112 MC28 all GRP construction
The advantages of this seat cowling over stock include:
– Design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9006). For race use, location for LED Tail light acts as air vent
– higher at the rear, to give the bike a more agressive stance
– better rider control by use of enclosed seat area
– improved strength with precision in design and fitment as well as lighter weight.
TYGA no: BPFS-0046Â
SKU: hon-10242 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC28, ShopSide cover left Blue, Honda MSX125 GROM
€39.31
Cover L Side, Blue
TYGA no: 83540-K26-900ZE
SKU: MSX-10223 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopFork gear shift no.1 (2 on the axle), RGV250/RS250
€82.24
VHM insert, Aprilia RS125 (alg-10176)
piston height -0.35 mm, squish 0.90 mm. Most used is 12,0 cc.
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
Front fender (GRP), KTM RC125/RC200/RC390
€120.42
This lightweight tough GRP front fender replaces the plastic item, and is ideal for racing where crash resistance is important.
Made from top quality epoxy resin and glass fabric, this component is both stronger and lighter than similar appearing products made using the cheaper polyester risin and chopped strand mat.
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
Update your bike with this great TYGA performance, KTM power part!!
Weights aprox. 400 grams.
TYGA no: BPFF-7131
SKU: ktm-10030 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, KTM, RC 125/200, RC 390, Shop