Triple Clamp Set, 3D, CNC Silver, NC35 RVF400
€673.59
CNC machined TYGA triple clamp set for your NSR250 MC28.
These stylish, all aluminium triple clamps are a direct replacement for the MC28 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!
They are delivered ready to fit with all necessary bearings and bottom seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ key holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-3313
SKU: hon-11264 Categories: ALL products, CNC parts, CNC parts, Honda, RVF400RR NC35, Stock list, all modelsSection, Pipe, Stainless, CBR150
€148.12
CBR150 Pipe. Silencer not included.
Cowl Stay, Fr. R., MC21/28
€20.90
Cowl Stay, Fr. R., MC21/28
TYGA no: 64531-KV3-830
SKU: hon-11089 Categories: ALL products, High performance, Honda, New OEM Honda parts, New OEM Honda parts, NSR250, NSR250 MC21, NSR250 MC28Side Cowling, Right, Race, GRP, KTM RC390 WSS300
€199.10
Side Cowling, Right, Race, GRP, KTM RC390 WSS300
Replacement Side Cowling, Right, GRP, Race, WSS300, MUST be used with KTM WSS300 hardware
see also:
BPCU-7331UR (Carbon Unpolished)
BPCU-7331R (Carbon Clearcoated)
Rubber Grommet type 2
€0.78
Mini LED turn signal lamps. Universal fitting. Bright but small and discrete, these units are easy to install requiring just one hole. Ideal for the finishing touch of any custom project. Please note that any LED turn signals draw a smaller current than most standard fitment ones and will need suitable flasher relay in order to flash at the correct speed.
TYGA no: 5046-042-00
SKU: alg-10420 Categories: 848 / 1098 / 1198, ALL products, Aprilia, Cagiva, CBR1000 2004-7, CBR1000 2008-11, CBR1000 2012-, CBR125R/CBR150R 2004-10, CBR125R/CBR150R 2011-, CBR250R 2011 - 15, CBR250R MC19, CBR250RR MC22, CBR300R 2014-, CBR400RR NC23, CBR400RR NC29, CBR600RR 2003- 4, CBR600RR 2005- 6, CBR600RR 2007- 16, CBR900RR 1992- 95, Ducati, Duke 125/200 2012- 16, Duke 390 2012-16, ER6N-F 2009-11, GSX-R1000 K5-K6, GSX-R1000 K7-K8, GSX-R1000 K9-K10, GSX-R1300 Hayabusa, GSX-R1400 Hayabusa, GSX-R600/750 K6-K7, GSX-R600/750 K8-K10, Honda, KSR110 2005- 10, Mito 125, Monster, MSX125 2013 - 2015, MSX125SF 2016 -2020, Ninja 250R 2008- 12, Ninja 250R/300R 2013 -, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RC 125/200, RC 390, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, RSV125, RVF400RR NC35, Shop, Suzuki, Universal parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30, VTR1000Sp1SP2, Yamaha, YZF-1000 R1 2002- 6, YZF-1000 R1 2007- 8, YZF-1000 R1 2009- 14, YZF-600 R6 2006- 7, YZF-600 R6 2008- 12, YZF-R125 2009-, YZF-R25/R3, Z125 2016-, ZX10R 2011 -15, ZXR250CLower triple clamp CNC black, Honda RVF400 -> CBR600 fork
€367.66
Lower Triple Clamp, CNC Black, CBR600RR forks/NC35 shaft
CNC machined TYGA lower triple clamp for the NC35 RVF400 to take 53 mm diameter CBR600RR forks. (For later model CBR600RR which use 54 mm forks, we can supply by special order so please send us an email or put a comment with your or der that you need 54 mm and not the default 53mm.)
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
This product does not include headstock seals or bearings. To complete the set we recommend you also order:
Seals: 53214-371-010 & 53214-KA4-701
Bearings: 91015-KT8-005 & 91016-KT8-005
This product is also sold as part of a set TYLY-1742, Triple Clamp Set, CNC Black, CBR600RR Forks to fit NC35.
TYGA no: TYLY-1942
SKU: hon-10550 Categories: ALL products, CNC parts, CNC parts, Honda, RVF400RR NC35, Shop, Stock list, all modelsFront Fork Preload Adjusters blue/red (Pair), Honda MC18/MC21/MC28/NC30
€262.31
Fork Caps, Full adjustment.
Many race replica street bikes are graced with adjustable suspension as standard, but as with many ‘so-called’ adjustable suspension systems on production bikes, the actual adjustment available is very limited. The manufacturer lets you adjust within very tight parameters so that it’s difficult to get the settings wrong.
The TYGA fork tops do away with this dictator attitude, allowing you to take control of your set-up.
The preload adjustment is increased, with an extra 4mm possible, and we also provide a full 20 clicks of rebound adjustment that works!
Another great feature is the easy-turn knob for rebound adjustment. No more fumbling around for the screw driver.
The fork tops are manufactured from top quality anodized 6061 T6 aluminium and come ready to install, and are a direct replacement for the standard parts. Securing to the fork tube is by a pin spanner that is provided.
Basic suspension rebuild skills are useful for fitting, but full instructions will be provided.
Fits MC21SE/SP, MC28SE, MC18SP & NC30.
Please note that these Fork Caps will not work with ‘R’ spec NSR forks, or ’89 NC30, as these are preload adjustment only type forks.
TYGA no: TYLY-0038
SKU: hon-10355 Categories: ALL products, CNC parts, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, Shop, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30Spacer, Ignition Switch Holder, MC18
€7.35
Spacer, Ignition Switch Holder, MC18
TYGA no: TYLY-1170A
SKU: hon-10711 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250, NSR250 MC18, Stock list, all models