Top end rebuild set Cylinder A, Honda NSR250 MC21/MC28
€293.88
The picture shows everything you need to do a top end rebuild on your MC21/28. One kit includes all parts for one cylinder (cylinder ‘A’). To overhaul both cylinders please order 2 kits.
Honda OEM:
1x Gasket cylinder 12192-KV3-680
1x Gasket head 12251-KV3-830
1x Piston ring 13010-KV3-305
1x Piston B mark 13102-KV3-830
1x Piston pin 13111-KV3-771
1x RC valve shaft E clip 90601-KV3-000
1x Bearing piston 91102-KV3-771
1x Seal, RC valve shaft 91201-PA9-004
2x Dowel cylinder 94301-10160
2x Piston Circlip 15mm 94601-15000
There are different kits depending on the piston supplied and the pistons are sized to match the cylinder. The cylinders have a letter stamped on them. A cylinder = B piston B cylinder = no mark piston, C cylinder = D piston. The largest cylinder bore is A and the smallest is C. However, note that this is only for when cylinders are new or in good condition, so if the cylinder is worn, the corresponding piston will be a looser so a bigger piston might be advised. If the cross hatch honing of the cylinder is very feint then we suggest using the next size up piston. The differences in sizes are tiny (11 microns between largest and smallest) and for the most part not an issue so it is not a problem if a smaller piston is used in a larger cylinder or the other way round.
Cylinder A = 54.008mm – 54.011mm use Piston B = 53.966mm – 53.969mm
Cylinder B = 54.004mm – 54.008mm use Piston # = 53.962mm – 53.965mm
Cylinder C = 54.000mm – 54.004mm use Piston D = 53.958mm – 53.961mm
Piston to bore clearance = 0.039mm – 0.045mm
TYGA no: NHPS-0001A
SKU: hon-10439 Categories: ALL products, High performance, High performance, High performance, Honda, NSR250 MC21, NSR250 MC28, ShopCarbon license plate frame, USA spec.
€75.79
License Plate Frame, (Carbon), USA Spec
This is a real carbon fiber motorcycle license plate frame made by TYGA Performance and is made to fit the standard size US motorcycle license plates. It’s perfect for those motorcycle enthusiasts who love carbon fiber parts on their beloved bikes or who just simply want to add a performance touch.
Please note that this license plate frame is made of real carbon fiber and not aluminum/ plastic with carbon fiber look, those prints will fade and discolor over time.
Package will include 1 real carbon fiber motorcycle license plate frame that fits onto standard size US motorcycle license plates; screws are not included for the installation.
TYGA no: BPCC-6002
SKU: MSX-10466 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Honda, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020, Various parts, Various partsSuzuki RGV250 VJ22 Screen
€49.05
Suzuki RGV250 VJ22 Screen
This screen fits the original bodywork.
TYGA no: screenrgv
SKU: screenrgv Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, RGV250 VJ22, SuzukiSteering Stopper, Main, Ninja 400
€24.24
Steering Stopper, Main, Ninja 400
Designed and manufactured in house by TYGA Performance, this stainless steel steering stopper restricts the amount of steering angle on the Kawasaki Ninja 400. Ideal for racing and preventing smashed thumbs from ‘tank slappers’. Installs in minutes. No special tools or dismantling of the bike required.
TYGA no: BPSY-0217
SKU: kaw-10097 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 400R 2018-, Various partsset exhaust pipe stainless steel no silencer
€492.45
Set, Exhaust Pipe, Race System, Yamaha R25/R3, Stainless, No Silencer
This race system has been specifically developed for the Yamaha YZF R25 and YZF R3 and has been designed for optimum performance. As well as the improved performance, it saves weight over the stock system and of course, it looks awesome! Note this system does not include any silencer (muffler). Please see olur other exhausts EXPS-00072, EXPS-0073 and EXPS-0074 for complete systems including silencer.
Compatiblity
This exhaust can be installed on a bike fitted with the stock or with race bodywork and with or without the passenger pegs installed.
No modification of bodywork is required, however, the emission canister must be relocated using the clamp provided.
Please also see EXPS-0072 EXPS-0073 and EXPS-0074 for similar system.
Performance and Dynograph
Please refer to dynographs for TYGA fulls ystem with silencer installed
A) All Standard.
The standard exhaust system is replaced with the TYGA system. No modifications to the engine or fuelling were performed. Fitting a fuel controller could further increase the performance gains.
B) Airfilter/Airbox modification.
The standard exhaust system is replaced with the TYGA system. The airbox cover has been removed and a high flow filter fitted. This improves power all through the range. Fitting a fuel controller could further increase the performance gains.
TYGA no: EXPS-0075
SKU: yam-10062 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Yamaha, YZF-R25/R3Toe piece
€12.22
Replacement toe piece for your TYGA Step Kit.
Can also be used for fitting to almost any standard foot control lever to replace bent and damaged part by simply drilling a 6.3mm hole and countersinking on the back side of the lever.
Use Loctite to secure.
Comes with mounting bolt.
TYGA no: STAT-0001
SKU: alg-10042 Categories: ALL products, Aprilia, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, Honda, KTM, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RC 125/200, RC 390, RGV250 VJ21, RGV250 VJ22, RS125, RS250, RS250R NF5 / NX5, RVF400RR NC35, Shop, Steps, Steps, Suzuki, Various parts, VFR400RR NC30Kevlar stone guard, Honda RS250 NX5
€89.56
Stone guard, Kevlar, NX5 RS250R
Kevlar replacement part for Honda /HRC part number: 50819-NX5-700 used in modelyears 1993-1994
TYGA no: BPKC-0029
SKU: hon-10689 Categories: ALL products, Bodywork and carbon, By model, By product, Carbon, Honda, RS250R NF5 / NX5, Shop, Various partsCarbon dash cover, Yamaha V-max
€134.12
Weight approx. 0.09 kg. This is a simple replacement part for the stock item. Fits in minutes.