Carbon sprocket cover, Ducati monster 696/795/796/1100
€63.67
Sprocket Cover, (Carbon), Ducati Monster
Triple Clamp Set, CNC, Silver 3D Top Triple Clamp, Black Lower Clamp, NC35 Forks to fit NSR250 MC18
€673.59
CNC machined TYGA triple clamp set for your NSR250 MC28.
These stylish, all aluminium triple clamps are a direct replacement for the MC28 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!
They are delivered ready to fit with all necessary bearings and bottom seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ key holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-3300
SKU: hon-11269 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250, NSR250 MC18, Stock list, all modelsSet full race system with moto maggot silencer, Honda MSX125 GROM
€409.54
Set, Pipe, Full Race System, MSX125 Grom, Moto Maggot. First Generation
This full race system has been specifically designed for the MSX125 to maximise power. Made in stainless steel with spring mounted carbon silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too!
Total weight of the set is 2300 grams
Performance and Dynograph
The blue trace shows the 100% standard Honda MSX125 Grom, compared to the red trace, which is after installing the TYGA Full System set (EXPS-0043), and Carbon Silencer (EXSL-0042). Similar results would be expected with the Maggot.
A useful gain all through the range, increasing as the revs rise up to maximum.
Similar Products:
Please also see:
EXPS-0041 Carbon Oval Silencer System
EXPS-0052 Stainess Oval Silencer System
EXPS-0065 Moto Maggot High level System for 2016 MSX125SF second generation Grom
Compatibility:
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
<iframe width= 560 height= 315 src= https://www.youtube.com/embed/q4RjGB7doOM frameborder= 0 allowfullscreen></iframe>
TYGA no: EXPS-0042
SKU: MSX-10133 Categories: ALL products, Exhausts, Honda, MSX125 2013 - 2015, ShopTriple clamp set CNC black, Honda NSR250 – CBR600 fork
€673.59
Triple Clamp Set, CNC Black, CBR600RR Forks to fit MC18
CNC machined TYGA lower triple clamp for the NSR250 MC18 (1988/1989) to take 53 mm diameter CBR600RR forks. (For later model CBR600RR which use 54 mm forks, we can supply by special order so please send us an email or put a comment with your order that you need 54 mm and not the default 53mm.)
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Note, we recommend using Handlebar set 48 mm. TYLY-0012 when installing this triple clamp set for best clearance issue with the NSR fairing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-1245
SKU: hon-10702 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250, NSR250 MC18, Stock list, all modelsPillion seat cover “GRP”, KTM RC390 2022 –
€81.19
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: BPFX-7731
SKU: ktm-10211 Categories: ALL products, Bodywork and carbon, Exhausts, KTM, RC390 2022-, Stock list, all modelsTYGA stepkit replacement brake link 8mm
€9.04
Tyga Step Kit Replacement Brake Link, 8mm
This replacement part fits to the Tyga step kit brake lever on the Kawasaki Ninja 400
Carbon rear hugger, Honda NSR250 MC21
€206.83
New stylish design avoids use of cable ties by using the existing mounting points on the MC21 swing arm.
This product replaces the black and carbon look GRP item we used to sell.
Update your bike with this great carbon product.
TYGA no: BPCH-0002
SKU: hon-10228 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, By model, Carbon, Honda, NSR250 MC21, ShopCarbon upper cowling race TYGA, Suzuki RGV 250
€742.02
One of our most popular bodykits from last years.
This kit comprises of the parts shown in the picture which are also available separately.
Light and strong, update your RGV250 with these great parts.
* A clear screen is provided unless you specify tinted in the comment box at check out
This kit is supplied with all additional fasteners required to mount it to a stock VJ22
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
TYGA no: BPCU-9126
SKU: suz-10227 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, RGV250 VJ22, Shop, Suzuki