Clutch Lever TYGA CNC flip up , KTM Duke – RC125/RC200/RC390
€54.27
Clutch Lever TYGA CNC flip up , KTM Duke – RC125/RC200/RC390
CNC machined from solid billet, these flip up type levers are made to a very high standard.
Not to much bling, and the orange color matches your KTM RC series good quality and adjustable in reach and length.
Fits’s in minutes and changes the appearance of your KTM!
TYGA no: LEVC-7003
SKU: ktm-10077 Categories: ALL products, CNC parts, CNC parts, CNC parts, CNC parts, Duke 125/200 2012- 16, Duke 125/200 2017 -, Duke 390 2012-16, Duke 390 2017 -, KTM, RC 125/200, RC 390, RC390 2022-Bracket, Left Footrest, Ninja 250R/300R kawa 2013 -18
€161.49
Bracket, Left Footrest, Ninja 250R/300R kawa 2013 -18
TYGA no: 35063-0999
SKU: kaw-10158 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R/300R 2013 -, ShopFuel Tank, GRP, NSR250 MC21, Unpainted
€1,036.32
Fuel Tank, GRP, NSR250 MC21, Unpainted
Top quality reproduction of the steel MC21 fuel tank in GRP. This product is a direct replacement for the stock fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
Note, will only fit MC21 type seat cowlings.
TYGA no: BPFG-0004
SKU: hon-11193 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, NSR250 MC21, ShopSeat cowling duo stock shape painted RT, Honda RVF400 NC35
€447.62
Seat Cowling (GRP), NC35, Dual, Stock Shape (Painted RT)
Stock shape seat cowling with taillight holes and mounts. Direct replacement for stock NC35 seat cowling in the exact same shape but without the nasty joins. This seat cowling uses OEM seat pad and taillight.
Compatible Parts:
All Tyga Performance and Honda OEM panels. Retains use of Honda OEM taillight and seat pad
Painted in classic RT scheme (1996-2000). This panel is finished to match the stock paintwork
TYGA no: BPFT-9204 RT
SKU: hon-10648 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35Seat Lock, Universal, Assy
€23.44
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: TYTO-0047
SKU: hon-11522 Categories: ALL products, chassis & fittings, Honda, RC36-2 -> RC30 replica products, Shop, Stocklist, various partsSet pipe, Full race with round stainless silencer, Kawasaki ZXR250/300 2013 –
€548.01
.Set, Pipe, Full Race System, Ninja 250R/300R, Round Stainless SilencerThis full race system has been specifically designed for the Ninja 250 to maximise power. Made in stainless steel with spring mounted carbon silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! Unlike the stock system and most other aftermarket full systems, the TYGA Performance full race system is routed up the right side of the bike for the best possible gas flow and the performance figures support this. Please see below.(May not comply with noise regulations for some states and territories and may exceed noise regulations for some ciircuits)This system is supplied with a stainless round silencer.<iframe width= 560 height= 315 src= https://www.youtube.com/embed/aFjJq-crAQ8 frameborder= 0 allowfullscreen></iframe>
Please see the two dyno graphs from Kawasaki Racing Australia who independently tested the TYGA system against the stock system and also against a well known competitor. The figures clearly show the advantages of installing a TYGA full race exhaust whether it be for street or for race use.Graph 1 shows 8.5% more power over stock just from installing the TYGA Full systemGraph 2 shows the peaks are very similar but look how the TYGA system has more power everywhere else, up to 10% more power in the important 9,000 to 10,000 range. The Leo Vince exhaust was mapped for 98 octane and the Tyga for 91 which should give an advantage to the Leo.
TYGA no: EXPS-0047
SKU: kaw-10030 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R/300R 2013 -, ShopFront fender GRP, RC36-2 RC30 style
€95.00
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: BPFF-7049
SKU: hon-11477 Categories: ALL products, Bodywork, Honda, RC36-2 -> RC30 replica products, Shop, StocklistCarbon seat Cowling , NX5 RS250R (1995 NSR250 style)
€1,096.23
Kit, Fairing Set, Carbon, Honda NX5 RS250R (1995 NSR250 Style)
Complete Carbon Bodywork kit which consists of the following products:
Upper Cowling Race, Carbon, NX5 RS250R (Late Model Style) (BPCU-9036)
The Carbon upper fairing is modelled off the 1995 NSR250 racer but will fit any NX5 which has the ram air through the fuel tank system.
Lower Cowling, Carbon, NX5 RS250R (Late Model Style) (BPCL-9036)
The Carbon lower fairing is modelled off the ram air version of the NX5 RS250R but will fit any NX5 which uses a stock upper as far as we can tell.
Seat Cowling Race, Carbon, NX5 RS250R (1995 NSR250 Style) (BPCT-9036(p))
This seat cowling is modelled on the 1995 factory NSR250 racer look as ridden by Ukawa, Okada, Romboni, Jacque etc. and is a direct fit for the NX5. The seat cowling uses a special seat support which bolts to the subframe using existing mounting lugs and the seat cowling is covered underneath for streamlining and protection of the PGM and connectors.
Seat Support NX5 RS250R (BPCX-9036)
Screen Clear NX5 RS250R (1995 NSR250 Style) (SCRE-0176)
Made to order, takes approx 1 to 2 weeks to be ready for shipping
TYGA no: BPCT-9036
SKU: hon-10949 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, Shop