Bar end weight (pair), Honda CBR250RR MC22
€21.46
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-0322
SKU: hon-11468 Categories: 4 stroke exhaust sets, ALL products, CBR250RR MC22, Exhausts, Honda, Shop, SilencersCarbon heel guard right,
€32.04
Replacement left heel guard for Tyga step kits, see model below. TYGA design, but will also fit standard Aprilia RS-250 hanger.
STAA-0006
STAA-0024
STAA-0124
TYGA no: BPCC-9008
SKU: apr-10028 Categories: ALL products, Aprilia, Bodywork and carbon, Carbon, CNC parts, CNC parts, KTM, RC 125/200, RC 390, RS250, Shop, Various partsSidehanger right TYGA, Honda RS250 NX5
€54.77
Replacement right hanger for your TYGA Step Kit. Complete with mounting bolts.
TYGA no: STAH-0044
SKU: hon-10691 Categories: ALL products, By model, By product, CNC parts, CNC parts, Honda, RS250R NF5 / NX5, ShopTop end rebuild set Cylinder A, Honda NSR250 MC21/MC28
€293.88
The picture shows everything you need to do a top end rebuild on your MC21/28. One kit includes all parts for one cylinder (cylinder ‘A’). To overhaul both cylinders please order 2 kits.
Honda OEM:
1x Gasket cylinder 12192-KV3-680
1x Gasket head 12251-KV3-830
1x Piston ring 13010-KV3-305
1x Piston B mark 13102-KV3-830
1x Piston pin 13111-KV3-771
1x RC valve shaft E clip 90601-KV3-000
1x Bearing piston 91102-KV3-771
1x Seal, RC valve shaft 91201-PA9-004
2x Dowel cylinder 94301-10160
2x Piston Circlip 15mm 94601-15000
There are different kits depending on the piston supplied and the pistons are sized to match the cylinder. The cylinders have a letter stamped on them. A cylinder = B piston B cylinder = no mark piston, C cylinder = D piston. The largest cylinder bore is A and the smallest is C. However, note that this is only for when cylinders are new or in good condition, so if the cylinder is worn, the corresponding piston will be a looser so a bigger piston might be advised. If the cross hatch honing of the cylinder is very feint then we suggest using the next size up piston. The differences in sizes are tiny (11 microns between largest and smallest) and for the most part not an issue so it is not a problem if a smaller piston is used in a larger cylinder or the other way round.
Cylinder A = 54.008mm – 54.011mm use Piston B = 53.966mm – 53.969mm
Cylinder B = 54.004mm – 54.008mm use Piston # = 53.962mm – 53.965mm
Cylinder C = 54.000mm – 54.004mm use Piston D = 53.958mm – 53.961mm
Piston to bore clearance = 0.039mm – 0.045mm
TYGA no: NHPS-0001A
SKU: hon-10439 Categories: ALL products, High performance, High performance, High performance, Honda, NSR250 MC21, NSR250 MC28, ShopHandle bar bung (pair), Honda RVF400 NC35
€12.47
Seat Cowling, (GRP), NC30/NC35 GP-T
This product is the latest TYGA design for the 400 V4 and is designed to be stylish and lightweight. This product includes ONLY the seat cowling for replacement in the event of an accident or can be used for a project bike of another model. For the MC21, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessay parts to complete the modification. For installation of any other model the customer will need to make the necessary modifications,
BPFS-0148 (GRP, NC30)
BPFS-0149 (GRP, NC35)
BPFS-0150 (Carbon, NC30)
BPFS-0151 (Carbon, NC35)
The advantages of this seat cowling over stock include:
– use with rest of seat cowling kit, much lighter than stock
– new design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9133).
– higher at the rear, to give the bike a more agressive stance
– better rider control by use of enclosed seat area
– improved strength with precision in design and fitment
Tyga Performance Compatible Parts for this Product:
This product is compatible with:
BPFX-9034 and BPCX-9134 Undertray, NC30/NC35 GP-T
TYLY-0133 Subframe, NC30/NC35 GP-T
TYLY-0130 Batterybox NC30/35 GP-T
BPFX-9234 Seat Support, NC30/NC35 GP-T
BPSP-0006 Seat Pad, GP-T
BPAC-0001 Rear Brake Reservoir Kit,
BPLT-0009 LED Taillight
BPFX-9133 Registration Plate Holder GP-T
Oil seal (8x16x5) cylinder, RGV250/RS250
€3.30
Boyesen Dual reeds, Suzuki RGV250 – Aprilia RS250
€95.04
Boyesen Dual power reeds (alg-10229)
Suzuki RGV250 – Aprilia RS250
Boyesen Power Reeds use a patented dual-stage fiberglass design for more airflow, more air velocity and more overall power.
1 engine = 1 set
(the reed blocks are not with the set, only the reeds)
TYGA no: 610,718 boy718
SKU: alg-10229 Categories: ALL products, Aprilia, High performance, High performance, High performance, RGV250 VJ22, RS250, Shop, SuzukiManifold, Yamaha RD350LC
€33.01
Manifold, Yamaha RD350LC
This is a replacement part. When ordering chamber sets, this item is included in the price and you do not need to order this part separately.
Compatible with the following TYGA systems:
EXCS-0044
EXCB-0044L
EXCB-0044R
TYGA no: EXMN-0044
SKU: yam-10066 Categories: ALL products, Exhausts, RD350LC 4L0, Stock list, all models