Carbon front fender stock shape , Honda NSR125 JC22
€165.87
Real Carbon fibre reproduction of the stock OEM Honda front fender. Finished in high gloss, adds beauty and reduces unsprung weight. (weight of part approx. 0.2 kg)
TYGA no: BPCF-7035
SKU: hon-10479 Categories: ALL products, Carbon, Honda, NSR125 JC22 1994 - 2003, ShopBracket rear brake CNC black 84mm Brembo, Suzuki RGV250 VJ23
€110.40
Bracket, Rear Brake, 84mm Brembo Conversion, Black, RGV250 VJ22 and VJ23.
This is to fit the 84mm pitch rear caliper.
Also available in silver (TYLY-0090)
Applicable with the following Brembo model calipers:
Rear caliper P2
Code 20.6951.46
and
Rear CNC caliper P2
Code XA7.29B0
Fuel Tank, GRP, NSR250 MC28, Unpainted
€1,036.32
Fuel Tank, GRP, NSR250 MC28, Unpainted
Top quality reproduction of the steel MC28 fuel tank in GRP. This product is a direct replacement for the stock fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
This product can be used on all MC28 model NSR250s and MC21 models if fitted with an MC28 compatible seat cowling. This means that if you have an MC21 and would like to install this tank, it is possible by installation with any of the following TYGA seat cowling sets:
BPFS-0005
BPFS-0006
BPFS-0045
BPFS-0046
BPFS-0133
BPFS-0134
BPFS-0135
BPFS-0136
BPFT-0007
BPCT-0007
TYGA no: BPFG-0001
SKU: hon-10983 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Bodywork Set 2, GRP, Painted RC36-2 RC30 Style, Race
€4,231.40 €4,019.83
Bodywork Set 1, GRP, Painted RC30, RC36-2 RC30 Style, Street
Due to high demand, please allow 1-2 months after placing your order for the painted parts to be ready
SPECIAL INTRODUCTORY PRICE FOR PAINTED KIT
Consist of:
- BPFU-7049Â Â Â Â Â Â Â Â Â Upper Cowling, GRP, RC36, RC30 Style, Street
- SCRE-0182Â Â Â Â Â Â Â Â Â Â Screen, RC36-2, RC30 Style, Street
- BPFL-7049Â Â Â Â Â Â Â Â Â Â Lower Cowling, GRP, RC36, RC30 Style, Street
- TYBP-0006Â Â Â Â Â Â Â Â Â Â Hardware, Cowling, GRP, RC36, RC30 Style, Street
- BPFT-7049Â Â Â Â Â Â Â Â Â Â Seat Cowling, GRP, RC36, Single, RC30 Style, Street
- TYLY-0314Â Â Â Â Â Â Â Â Â Â Â Subframe Set, RC36-2, RC30 Style, Street
- BPFG-0009Â Â Â Â Â Â Â Â Â Fuel Tank, GRP, VFR750 R36-2, RC30 Style, Unpainted
- TYBP-0009Â Â Â Â Â Â Â Â Â Â Fitting Kit for Fuel Tank, RC36-2, RC30 Style
- TYLY-0318Â Â Â Â Â Â Â Â Â Â Â Fuel Tap Extension, RC36-2, RC30 Style
- TYLY-0305Â Â Â Â Â Â Â Â Â Â Â Upper/Mirror Stay, 40mm, RC36, RC30 Style
- TYLY-0317Â Â Â Â Â Â Â Â Â Â Â Meter Stay, RC36-2, RC30 Style
- BPFC-7049Â Â Â Â Â Â Â Â Â Â Frame In-Fill Panel, GRP, Pair, RC36-2, RC30 Style
- TPER-0113Â Â Â Â Â Â Â Â Â Â Steering Stopper, Honda VFR750R RC36 (94-97)
- 16956-MT4-000Â Â Fuel Hose, RC36/1
- BPSP-0012Â Â Â Â Â Â Â Â Â Â Bum Stop, RC30 Style, Replacement
- BPSP-0013Â Â Â Â Â Â Â Â Â Â Seat Pad, RC30 Style, Replacement
- TYPP-0036Â Â Â Â Â Â Â Â Â Â Lock Assy. RC36-2, RC30 Style.
- BPAC-0015Â Â Â Â Â Â Â Â Â Set Windscreen Molding and Clips
- TYPA-0025Â Â Â Â Â Â Â Â Â Â Paintwork, RC30 Scheme
Choose between 40mm (default) and 30 mm mirror pitch
Note: All parts used for the RC36-2 RC30 replica can be ordered individually. Please see here for the complete parts list, click on images below to open product page for that particular component for more information and photos.
40mm pitch mirror version is provided unless you specify 30mm in the comment box at check out
TYGA no: BPFS-0241
SKU: hon-11531 Categories: ALL products, Bodywork, Honda, RC36-2 -> RC30 replica products, Shop, StocklistKit, Fairing set (race) Stock shape 1989 Honda NSR250 MC18
€484.01
Kit, Fairing Set (Race), Stock Shape, 1989, NSR250 MC18
Consist of BPFU-9222 Upper Fairing, BPFL-9122 Lower Fairing and a clear or tinted screen (choose from options below)
TYGA no: BPFS-0174
SKU: hon-10921 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC18, ShopExhaustset stainless steel alum. silencer round, Kawasaki ZXR250
€506.31
This full race system has been specifically designed for the Ninja 250 to maximise power. Made in stainless steel with spring mounted aluminium silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! (May not comply with noise regulations for some states and territories)This system is supplied with a round aluminium silencer EXSL-0033
Independent Review:TYGA Ninja 250R Race Exhaust System Dyno ResultsOctober 29th, 2010 Adam2008 Ninja 250R Dyno: TYGA Round Aluminum Race Exhaust System vs. Stock ExhaustI’m a private party and this is my review of the TYGA Round Aluminum Race System. I am not a dealer, nor do I work for TYGA, but I’m a street rider and club racer. I’m reviewing this because I found little to no information regarding this system and I wanted to share my findings with others who found themselves in the same predicament as me (how can I pay less and not sacrifice performance!?!?). I scoured the internet but found no proof this system would give me any performance gains. I knew TYGA was a reputable manufacturer of quality products so I took a leap of faith and boy did it pay off!Ninja 250R Dyno results are for the following runs:Black: Stock Exhaust (no modifications whatsoever)Blue: Stock Exhaust (snorkel removed)Red: TYGA Round Aluminum Race System (snorkel removed)Note: Carbs were not jetted. Fuel mixture screws were not adjusted.HP Gains:1) Remove snorkel ( 1.5HP) == 28.1HP!2) Install TYGA Round Aluminum Race System ( 4.2HP) == 32.3HP!Total: 5.7HP ( 4.2HP from TYGA exhaust!)Weight Comparison (lbs):Stock | Header: 4.1 | Can: 10.5**| Total: 14.6 lbsTYGA | Header: 3.4*| Can: 2.6**| Total: 6 lbsWeight reduction: 8.6 lbs!** does not include mounting clamp or bolt* includes all hardware – ie: springs, bung plug, manifolds<iframe width= 560 height= 315 src= https://www.youtube.com/embed/z5hGKrpQ56c frameborder= 0 allowfullscreen></iframe>
TYGA no: EXPS-0018
SKU: kaw-10018 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R 2008- 12, ShopRacing step kit CNC silver, Honda RS250 NX5
€271.50
Designed and built in-house by TYGA Performance using CAD/CAM software, these CNC machine- made step kits are manufactured from top grade aluminium and is supplied complete with super stiff carbon heel guards.
Direct replacement for standard parts, this step kit retains standard position. Pitch of hanger to frame mounting holes is 78.4 mm.
TYGA no: STAA-0022
SKU: hon-10511 Categories: ALL products, CNC parts, CNC parts, Honda, RS250R NF5 / NX5, ShopSet exhaust without header, race system without silencers
€409.54
This race system has been specifically developed for the KTM RC390 to maximise performance and looks. The dual underseat system eliminates any issues with ground clearance unlike some other systems on the market. In addition, in the event of an accident the exhaust is well protected. Other systems which have the exhaust exiting the right side of the swing arm will usually suffer terminal damage.
Compatiblity: This exhaust can be installed on a bike fitted with the cup race bodywork or standard, with passenger pegs installed or removed. It can be installed with stock registration/turn signal holder.
** Attention ** if you have the EURO 4 type RC390 2016, this means with the exhaust on the right side, not the exhaust under the engine. This exhaust won’t fit, because the header is different. You need to order the full system. Please see product: ktm-10092 / ktm-10093.
For use with stanadard belly pan, we recommend the installation of the exhaust outlet cover BPFC-7431, and for use without passenger pegs, option carbon exhaust guards are available BPCC-0021L and BPCC-0021R.
Please also see EXPS-0061, EXPS-0062, EXPS-0091 and EXPS-0092 for systems complete with silencers.
TYGA no: EXPS-0093
SKU: ktm-10094 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, KTM, RC 390, Shop