Carbon under cowling belly exhaust , Honda 1st + 2nd gen.
€289.52
Under Cowl, Belly Exhaust Type, (Carbon), MSX125 Monkey
Bling up your grom with this cool component. High quality mounting hardware provided and easy to install. Although this will fit all MSX125 Groms with stock Honda or TYGA exhausts, it was designed specifically to be compatible with low mount belly exhausts including:
– Honda low mount stock exhausts supplied with the second generation 2016 MSX125SF models
– TYGA belly exhausts EXPS-0064 and EXPS-0068 (which are suitable for all model MSX125SF Groms)
See table below for more information.
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
TYGA no: BPCL-7328
SKU: MSX-10354 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Honda, Monkey 125 2018-, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopGear 2nd drive z=16 no.2, RGV250/RS250
€92.10
VHM insert, Aprilia RS125 (alg-10176)
piston height -0.35 mm, squish 0.90 mm. Most used is 12,0 cc.
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
Upper Cowling (GRP), NX5 RS250R (1995 NSR250 Style)
€303.70
Upper Cowling Race, (GRP) NX5 RS250R (1993 Style) (BPFU-9236)
The upper fairing is modelled from the first version of the NX5 which has the side air intake. We made it slightly different by smoothing the left side where there is normally a cut out near the steering damper but is otherwise stock shaped. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with lower cowling BPFL-9136.
Requires screen SCRE-0173
TYGA no: BPFU-9336
SKU: hon-10982 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopCarbon upper cowling with airducts, stock shape, NXA RS250R (2001- ’08)
€850.63
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
Top Triple Clamp Nut (M24 x1), Honda MSX125 GROM
€25.75 – €25.76
Top clamp nut in colour. Light weight and good looking. Anodised for a long lasting finish. available in a variety of other colours. See photos.
This nut is a direct replacement to the top nut on many Honda machines, such as MSX125, MC18~28, RVF400, NSR150SP, CBR250/400/500, CBR900. (not suitable for NC30, RC30, SP2 but fits SP1)
The thread is M24x1
Torque setting: 65Nm
TYGA no: Â H136-A8Z1-0193GOLD-
SKU: msx-10203- Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020Lower cowling (GRP), stock shape, NXA RS250R (2001- ’08)
€226.37
VHM cylinder head (2 pieces), Honda RS250 (alg-10174)
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design
This head set comes with following parts:
2x cylinder head
2x standard insert (12.0cc)
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
Cover headlight upper cowling (pair) paint, Honda VFR400 – RVF400
€35.34
Cover, (paint), pair, Headlight, Upper Cowling, Endurance
To be used on the TYGA Endurance Fairings for NC30/35
TYGA no: BPFC-9010paint
SKU: hon-10646 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, VFR400RR NC30Carb Service Kit A, 36 pieces, Yamaha FZR400RR 3TJ1
€81.92
Carb Service Kit A, 36 pieces, Yamaha FZR400RR 3TJ1 & 3TJ32
LiteTek Carburettor Seal Kit to suit: Yamaha FZR400RR 3EN1 and 3EN2
Carburettor Model: Mikuni BDST 32
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
4x FB-001 Float Bowl Seal, Material: Flourosilicone (OE part number: 3GM-14997-00)
4x JH-001 Jet Housing Seal, Material: Viton 70A (OE part number: 3LF-14147-00)
4x OR-005 Pilot Screw O-Ring, Material: Viton 70A ( Part of Yamaha Assembly: Part Number 12R-14105-00)
4x WS-001 Pilot Screw Washer, Material: Stainless Steel (OE part number:N/A)
4x OR-001 Top Cap O-Ring, Material: Viton 70A (OE part number: 3EN-14239-00)
4x SR-004 Main Jet Sq ring, Material: Viton70 A (OE part number: 1AE-14227-00)
4x OR-002 Float Mount O-Ring, Material: Viton 70A (OE part number: 3EN-14147-00)
4x OR-010 Pilot Merge Cavity O-Ring, Material: Viton 70A ( OE part number: N/A)
4x OR-018 Slide Housing O-Ring, Material: Viton 70A (OE part number: 1AE-14147-00)