Exhaustset race Stainless steel Silencer aluminium round , NC30 NC35
€1,059.04
The TYGA Full Race System has been designed with maximum power in mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits both the NC30 and NC35. Most systems are not designed to be used with a side stand on the NC30, but the TYGA system can be used with a side stand on both the NC30 and NC35.
For unsurpassed looks, sound and performance, this system can be used with any of our 400 system exhaust silencers.
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing only half the weight of the stock system makes for a weight saving of4.2 kg.
NC35:
First, an NC35 was tested with the original Honda exhaust system and produced a peak of 53.5hp; about the right number for a stock bike.
Then the pipe was changed for the TYGA full stainless system, and the main jets increased one size from stock front and rear. No other changes were made, and the peak hp increased to 59.9hp, a gain of 6.4hp (Over 8% more power!)
NC30:
On the NC30, the advantage over the stock exhaust system is higher. With just the TYGA pipe and a couple of main jet changes, the power leaps from a stock 52hp up to a healthy 59hp. That’s 7hp, or 13.5% more.
The pipe set can be used with any silencer with a2 inchinternal diameter bore which is held in place by springs for ease of fitment and removal. TYGA provide the following compatible silencers which can either be ordered separately with this system or together as a set.
The pipe set is supplied with a round aluminium silencer EXSL-0047 which is held in place by springs for ease of fitment and removal. This system may not comply to specific country noise emission regulations and is not homologated for street use.
TYGA no: EXPS-0053
SKU: hon-10358 Categories: 4 stroke exhaust sets, ALL products, By model, By product, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, VFR400RR NC30Upper Cowling Right (Carbon), NC30/35, T13 Style , Assy.
€254.73
This a replacement part for bodywork sets BPFS-0116 and BPFS-0120
TYGA no: BPCU-9218R
SKU: hon-10815 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35Front Fender, Green, Ninja 250R 2008 -12
€95.79
Front Fender, Green, Ninja 250R 2008 -12
TYGA no: 35004-0079-777
SKU: kaw-10214 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopSection, Collector 1-2, KTM RC390 Serpent
€61.37
Section, Collector 1-2, KTM RC390 Serpent
TYGA no: EXPT-0053
SKU: ktm-10116 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsTriple clamp set CNC black, Honda VFR400 -> CBR600 fork
€673.59
Triple Clamp Set, CNC Black, CBR600RR forks to fit VFR400R, NC30
CNC machined TYGA lower triple clamp for the NC30 to take 53 mm diameter CBR600RR forks. (For later model CBR600RR which use 54 mm forks, we can supply by special order so please send us an email or put a comment with your order that you need 54 mm and not the default 53mm.)
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-1944
SKU: hon-10618 Categories: ALL products, CNC parts, CNC parts, Honda, Shop, VFR400RR NC30Silencer aluminium round 450mm (4 stroke) 2
€210.40
Silencer, Aluminium, Round, 2 x 450 mm., Assy.
This silencer has polished stainless steel endcaps and a tough anodized aluminium tube for a lightweight and attractive finish. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
The ‘slip-on’ mount is designed to fit any system with a 2 external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe. A silencer mounting clamp is also provided to secure the silencer to the bike.
Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.
Compatible with TYGA and other systems which use a 2 inch external diameter tail pipe, this silencer uses a 4 inch x 380 mm. outside aluminium tube.
TYGA no: EXSL-0047
SKU: alg-10135 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, Silencers, VFR400RR NC30Seal, Blank, Kickstart, MC28
€8.77
Seal, Blank, Kickstart, MC28
TYGA no: 90871-733-003
SKU: hon-11122 Categories: ALL products, High performance, Honda, New OEM Honda parts, New OEM Honda parts, NSR250, NSR250 MC28Carbon exhaust guard set, Honda CBR250 2011
€195.42
This lightweight carbon exhaust guard set coprises of front and rear guard and replaces the ugly heavy stock item and will enhance the beauty of your CBR.
Not. Product can be supplied without badge if you prefer. Just state ‘no badge’ in the comment box when ordering and we will supply unbadged.
TYGA no: BPCC-0016A+B
SKU: hon-10311 Categories: ALL products, Bodywork and carbon, Carbon, CBR250R 2011 - 15, Honda, Shop