*** NEW *** Carbon tank cover, Yamaha V-max
€261.38 €209.11
Weight approx. 0.48 kg. This item replaces the heavy steel cover. It is supplied with mounting cups for frame rubbers and rear mount for latch mechanism. Fits in minutes.
TYGA no: BPCX-7119
SKU: yam-10032-1 Categories: ALL products, Carbon, Second chance bargains, Shop, V-Max 1985 - 2007, YamahaFairing set race with air duct, Suzuki RGV 250
€467.40
One of our most popular TYGA bodykits from last years.
Designed for the Suzuki RGV250, but used on many bikes all over the world.
This kit comprises of the parts shown below which are also available separately.
* A clear screen is provided unless you specify tinted in the comment box at check out
This kit is supplied with all additional fasteners required to mount it to a stock VJ22
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
TYGA no: BPFS-0039
SKU: suz-10011 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, RGV250 VJ22, Shop, SuzukiLower triple clamp CNC black, Honda RVF400 -> CBR600 fork
€367.66
Lower Triple Clamp, CNC Black, CBR600RR forks/NC35 shaft
CNC machined TYGA lower triple clamp for the NC35 RVF400 to take 53 mm diameter CBR600RR forks. (For later model CBR600RR which use 54 mm forks, we can supply by special order so please send us an email or put a comment with your or der that you need 54 mm and not the default 53mm.)
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
This product does not include headstock seals or bearings. To complete the set we recommend you also order:
Seals: 53214-371-010 & 53214-KA4-701
Bearings: 91015-KT8-005 & 91016-KT8-005
This product is also sold as part of a set TYLY-1742, Triple Clamp Set, CNC Black, CBR600RR Forks to fit NC35.
TYGA no: TYLY-1942
SKU: hon-10550 Categories: ALL products, CNC parts, CNC parts, Honda, RVF400RR NC35, Shop, Stock list, all modelsLower Cowling, GRP, NC30, Stock Shape, Painted Type 1
€441.95
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: BPFL-0003Btype1
SKU: hon-11410 Categories: ALL products, Bodywork and carbon, Carbon, Honda, Shop, VFR400RR NC30Carbon tank filler cap cover Honda, CBR600 en CBR1000
€35.23
Carbon Tank Filler cap Cover. Fits most Honda sports bikes including:
MC18, MC21, MC22, MC28
NC23, NC29, NC30, NC35
Most other modern sports bikes such as CBR600, and CBR900, 1000 and 1100XX models
TYGA no: BPCC-0002
SKU: hon-10009 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Carbon, CBR1000 2004-7, CBR1000 2008-11, CBR1000 2012-, CBR250R MC19, CBR250RR MC22, CBR400RR NC23, CBR400RR NC29, CBR600RR 2003- 4, CBR600RR 2005- 6, CBR600RR 2007- 16, CBR900RR 1992- 95, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, RVF400RR NC35, Shop, VFR400RR NC30, VTR1000Sp1SP2Top end rebuild set Cylinder B, Honda NSR250 MC21/MC28
€293.88
The picture shows everything you need to do a top end rebuild on your MC21/28. One kit includes all parts for one cylinder (cylinder ‘B’). To overhaul both cylinders please order 2 kits.
Honda OEM:
1x Gasket cylinder 12192-KV3-680
1x Gasket head 12251-KV3-830
1x Piston ring 13010-KV3-305
1x Piston no mark 13102-KV3-830
1x Piston pin 13111-KV3-771
1x RC valve shaft E clip 90601-KV3-000
1x Bearing piston 91102-KV3-771
1x Seal, RC valve shaft 91201-PA9-004
2x Dowel cylinder 94301-10160
2x Piston Circlip 15mm 94601-15000
There are different kits depending on the piston supplied and the pistons are sized to match the cylinder. The cylinders have a letter stamped on them. A cylinder = B piston B cylinder = no mark piston, C cylinder = D piston. The largest cylinder bore is A and the smallest is C. However, note that this is only for when cylinders are new or in good condition, so if the cylinder is worn, the corresponding piston will be a looser so a bigger piston might be advised. If the cross hatch honing of the cylinder is very feint then we suggest using the next size up piston. The differences in sizes are tiny (11 microns between largest and smallest) and for the most part not an issue so it is not a problem if a smaller piston is used in a larger cylinder or the other way round.
Cylinder A = 54.008mm – 54.011mm use Piston B = 53.966mm – 53.969mm
Cylinder B = 54.004mm – 54.008mm use Piston # = 53.962mm – 53.965mm
Cylinder C = 54.000mm – 54.004mm use Piston D = 53.958mm – 53.961mm
Piston to bore clearance = 0.039mm – 0.045mm
TYGA no: NHPS-0001B
SKU: hon-10440 Categories: ALL products, High performance, High performance, High performance, Honda, NSR250 MC21, NSR250 MC28, ShopSilencer, Stainless, Oval/Carbon End Cap, Underbelly Long, MSX125 Grom
€313.65
Silencer, Stainless, Oval/Carbon End Cap, Underbelly Long, MSX125 Grom, no fittings
See also similar product EXSL-0059 (silencer, short type).
Shaft Holder, 25mm
€24.32
Shaft Holder, 25mm
This handy tool can be used to hold shafts, or any round object of 25mm diameter securely.
Just slip in the parts and clamp it all up in the vice
Manufactured from 6063 aluminum for strength and durability, it will clamp most metallic components without damage.