Upper cowling GP-T, Honda VFR400/RVF400
€317.01
Upper Cowling Street (GRP), NC30/NC35, GP-T, Assy.
Stylish replacement fairing designed in-house by TYGA Performance to give the NC30 and NC35 a contemporary look. This upper cowling utilizes stylish twin double unit LED headlight units, BPLT-0027. Together with lower cowling BPFL-9034 for NC30 and BPFL-9134 for NC35 and other mounting hardware it comprises sets BPFS-0144 for the NC30 and BPFS-0145 for the NC35.
This cowling is supplied with a plastic bung to mount to the meter stay.
See also BPCU-9034 for carbon version of this product.
Compatible parts:
BPFL-9034 and BPFL-9134 Lower Cowling
TYLY-0138 (NC30) and TYLY-0139 (NC35) Upper Stay
TYLY-0187 (NC30) and TYLY-0188 (NC35) Front Stay
TYLY-0189 (NC30) and TYLY-0190 (NC35) Side Stays
BPLT-0027 Headlight
SCRE-0161 Screen, Clear GP-T, or SCRE-0162 Screen, Tint GP-T
TYGA no: BPFU-9034
SKU: hon-10600 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, RVF400RR NC35, VFR400RR NC30TYGA / Kitaco Power up kit carbon , Honda MSX125 GROM
€750.67 €675.60
TYGA/KITACO Power Up Kit, Carbon Type
This power up kit is designed to give a significant power boost over stock. Using TYGA Performance and KITACO products, the power of the MSX125 Grom is increased by 25%. Below is the dyno graph. STD vs our full system with carbon silencer, Kitaco type 2 camshaft, i-map (setting #3). Similar results were found with the Moto Maggot and stainess type silencers.
Parts
This product consists of the components shown below, namely:
EXPS-0041 Set, Pipe, Full Race System, MSX125 Grom, Carbon Oval/Carbon End Cap
KIT-300-1432010 KITACO Type 2 Camshaft
KIT-763-1432010 KITACO i-Map. Fuel Injection Controller
For those who want a Type 1 camshaft, please put this in the commentbox at check out.
Option:
KIT-763-0500900 i-Map interface cable. To adjust the i-map for special setting. Software available on KITACO website.
Description:
Fitting this Power Up Kit to your Honda MSX125/GROM gives a significant increase in top end performance and over rev. Peak hp is moved from 7,000rpm (std) up to 8,000rpm, with a 1.6hp gain at peak.
Fitting the i-Map Fuel Injection Controller is a necessary modification to avoid the engine running lean and being damaged. Running the KITACO Type 2 camshaft without the i-Map is NOT an option!
The wire harness requires modification and the documents are included with the kit, or can be viewed here: http://www.kitaco.co.jp/data/product/link/instaling_manual/kitaco_installing_manual_grom_imap.html
The i-Map is shipped with “setting #3” activated. This is the basic map for this kit, but the map can be modified using the optional i-Map interface cable and software downloadable from the KITACO website:
i-Map Fuel Manager: http://www.kitaco.co.jp/dlservice.html
TYGA no: TPER-0095
SKU: MSX-10305 Categories: ALL products, Exhausts, Exhausts, High performance, High performance, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopIndicator, Rear, Left, Ninja 250R 2008 -12
€33.99
Indicator, Rear, Left, Ninja 250R 2008 -12
TYGA no: 23037-0117
SKU: kaw-10219 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopCarb. Setting kit HRC, NSR250 MC21
€577.21
Lightweight GP style upper stay to use on the GP style fairing
Compatible Parts
Upper cowlings, BPFU-0004, BPFU-0005, BPFU-0015 and BPFU-9012. For use with MC18, MC21 and MC28 models only
TYGA no: TPER-5000
SKU: hon-11290 Categories: ALL products, Bodywork, By model, High performance, Honda, NSR250 MC21, ShopSubframe aluminium , Honda RVF400 NC35
€493.97 €444.57
This lightweight aluminium subframe is closely modelled on the stock NC35 subframe and can be substituted for the heavy steel one with a weight saving of XXX. Made from extruded and CNC machined 6000 series aluminium, this product is hand-welded by our craftsmen to provide a strong, accurate and beautiful component. Finished in Hard wearing satin black powdercoating, it can be painted if the customer so chooses.
Note this subframe is for race and single seat use only and cannot be used for carrying a passenger. All mounting positions for exhaust stay, seat cowling, seat pad, undertray, radiator overflow bottle, electrical components etc which are normally mounted to the subframe are supplied with subframe, there are even two mounting holes in case you wish to install a remote reservoir rear shock (BPCC-0046 is a direct fit), so it is almost a simple plug and play. Most of the standard fasteners are used, however where necessary, replacements are included.
If you wish to run this subframe without the rear fender, then this is also possible and we recommend installing it along with Seat cowling bracket part number: TYLY-0224-17 and battery box TYLY-0026. In this configuration, you will need modify the rear mounts of the battery box and drill them to attach to the subframe and to cable tie, starter relay etc which are normally attached directly to the undertray
TYGA no: TYLY-0225
SKU: hon-10985 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, Shop, Various partsCarbon set, Yamaha R1 2009-14
€458.68
Carbon set, Yamaha R1 2009-10
A set contains:
Front fender
Rear Hugger
Chain guard
Direct replacement for original Yamaha part
Buy a complete set and it saves you money.
PLEASE NOTE: all ” TYGA” logo stickers on the carbon products can be easily removed because it is applied last above the clearcoat finish.
TYGA no: BPFS-0089
SKU: yam-10001 Categories: ALL products, Carbon, Shop, Yamaha, YZF-1000 R1 2009- 14Seat cowling duo stock shape painted RT, Honda RVF400 NC35
€447.62
Seat Cowling (GRP), NC35, Dual, Stock Shape (Painted RT)
Stock shape seat cowling with taillight holes and mounts. Direct replacement for stock NC35 seat cowling in the exact same shape but without the nasty joins. This seat cowling uses OEM seat pad and taillight.
Compatible Parts:
All Tyga Performance and Honda OEM panels. Retains use of Honda OEM taillight and seat pad
Painted in classic RT scheme (1996-2000). This panel is finished to match the stock paintwork
TYGA no: BPFT-9204 RT
SKU: hon-10648 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35Meterstay T8,CBR250RR MC22
€63.75
This stay is a replacement for the stock one when fitting our T8 bodywork. It is not an exact fit if used with stock fairing because front hole position is changed.