Under Cowl, Belly Exhaust Type, (GRP), White, MSX125
€196.87
Under Cowl, Belly Exhaust Type, (GRP), White, MSX125
Bling up your grom with this cool component. High quality mounting hardware provided and easy to install. Although this will fit all MSX125 Groms with stock Honda or TYGA exhausts, it was designed specifically to be compatible with low mount belly exhausts including:
– Honda low mount stock exhausts supplied with the second generation 2016 MSX125SF models
– TYGA belly exhausts EXPS-0064 and EXPS-0068 (which are suitable for all model MSX125SF Groms)
See table below for more information.
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
<a href= {{media url= wysiwyg/46-undercowl-bpfl-cl-7328-online-e5eb2cb5.pdf }} target= _self >Click here for PDF</a>
TYGA no: BPFL-7328 W
SKU: MSX-10367 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopSeat cowling passenger, KTM RC125/RC200/RC390
€150.56
Seat Cowling, Passenger, (GRP), KTM RC390
This lightweight seat cowling is the same shape as the stock foam passenger seat but being made of GRP is much lighter and can be painted to match your bike. Finished in primer, ready for painting, this product is supplied with all mounting hardware. As well as the weight saving, it adds style and individualism to your ride and can be installed in minutes.
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
TYGA no: BPFT-7231
SKU: ktm-10065 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, KTM, RC 125/200, RC 390, ShopSection, Header, Left, Stainless, Ninja 250R
€79.66
Header, Reft. Used on EXPS-0014, EXPS-0015, EXPS-0016, EXPS-0017 and EXPS-0018.
TYGA no: EXPT-0012
SKU: kaw-10104 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R 2008- 12, ShopKevlar ECU cover, Honda NX5
€126.42
Cover, Kevlar, ECU, NX5 RS250R
Kevlar replacement part for Honda/HRC part number: 20260-NX5-000
TYGA no: BPCC-0129
SKU: hon-10698 Categories: ALL products, Bodywork and carbon, By model, By product, Carbon, Honda, RS250R NF5 / NX5, Shop, Various partsFront fender (grp) stock shape, Honda RS250R NXA
€80.91
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
Section, Final, Front, Twin Stack, Stainless, NC30/35
€101.51
Final tailpipe section (front bank) for:
EXPS-0003 Set, Pipe, Twin Stack System, Carbon Silencers
EXPS-0005 Set, Pipe, Twin Stack System, Stainless Silencers
TYGA no: EXPT-9002
SKU: hon-10853 Categories: ALL products, Exhausts, Exhausts, Exhausts, Stock list, all modelsKitaco I-Map, Honda MSX125 GROM
€136.63
KITACO i-Map Fuel Injection Controller
Developed for the Honda MSX125 Grom, giving many choices of fuelling to suit different camshafts, exhausts and big bore engines. And a combination of these upgrades.
The different maps are selected by using DIP switches. Available setting are printed on the unit.
Fitting the i-Map to your MSX Grom requires splicing into the wire harness. Instructions can be seen here:
http://www.kitaco.co.jp/data/product/link/instaling_manual/imap_grom/kitaco_installing_manual_grom_imap.html
There is also the option of a custom map. However, this requires the use of the KITACO PC-USB Interface Cable (available separately).
Mapping :
Pre Installation of 3 Maps.
Remove the Limiter by fuel injection Cut features.
– Map 1 : Rpm limiter at 11000rpm, for stock engine
– Map 2 : Rpm limiter at 12000rpm, for stock engine with aftermarket exhaust
– Map 3 : Rpm limiter at 12000rpm, for 133cc bore up kit and aftermarket exhaust
– Map 4 : Full tuneable map with option USB controller and free Kitaco software. When delivered it is genuine map.
Fit on CE and US models
TYGA no: 763-1432010
SKU: MSX-10309 Categories: ALL products, High performance, High performance, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopCowling left red, Honda MSX125 GROM
€23.09
Cowling left red, OEM Honda part
TYGA no: 77225-K26-900ZDÂ
SKU: MSX-10289 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, Shop