Mirror (set), NC30 NC35
€24.56
Stylish simple lightweight mirrors to mount on bodywork. Ideal for panels which don’t have any mounting points for the mirrors such as race fairings with race stays such as TYGA Performance upper cowlings:
NOT recommended for fairings where the stock mirror position and stay is retained.
TYGA no: TYMR-0001
SKU: hon-10080 Categories: ALL products, CBR400RR NC23, CBR400RR NC29, Honda, RVF400RR NC35, Shop, Universal parts, Various parts, Various parts, VFR400RR NC30Carb Service Kit A, 48 pieces, Honda VFR750R RC36 (94-97)
€81.92
Carb Service Kit A, 48 pieces, Honda VFR750R RC36 (94-97)
LiteTek Carburettor Seal Kit to suit: Honda VFR750R RC36 (1994-1997)
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
4x FB-013 Float Bowl Ring, Material: Flourosilicone (Part of Honda Kit No. 16010-MZ5-600 (16010-MZ5-920) Gasket Set A)
4x OR-005 Pilot Screw O-Ring, Material: Viton 70A (Part of Honda Kit No. 16010-MZ5-600 (16010-MZ5-920) Gasket Set A)
4x WS-001 Pilot Screw Washer, Material: Stainless Steel (Part of Honda No. 16016-MV9-730 Screw Set)
4x OR-009 Drain Screw O-Ring, Material: Viton 70A (Part of Honda Kit No. 16010-MZ5-600 (16010-MZ5-920) Gasket Set A)
4x OR-009 Air Cut Valve O-Ring, Material Viton 70A (Part of Honda Kit No. 16041-MZ5-600 Gasket Set C)
8x OR-023 Air Cut Valve O-Ring, Material Viton 70A (Part of Honda Kit No. 16041-MZ5-600 Gasket Set C)
4x OR-006 Needle O-Ring, Material: Viton 70A (Part of Honda Kit No. 16010-MZ5-600 (16010-MZ5-920) Gasket Set A)
4x OR-016 Fuel Tee O-Ring, Material: Viton 70A (Part of Honda Kit No. 16040-MZ5-600 Gasket Set B)
4x OR-024 Vacuum Breather O-Ring, Material: Viton 70A (Part of Honda Kit No. 16040-MZ5-600 Gasket Set B)
4x OR-011 Overflow O-Ring, Material: Viton 70A (Part of Honda Kit No. 16040-MZ5-600 Gasket Set B)
4x CS-004 Choke PLunger Cap, Material: HNBR (Part of Honda assembly 16046-MZ7-640)
TYGA no: CKA-Honda-VFR750R-RC36 (94-97)
SKU: alg-10347 Categories: ALL products, Carburettor Service Kits,, Honda, RC36-2 -> RC30 replica products, various parts, various parts, VFR750F Gen 4, 94-97Carbon Air duct “satin” (pair), NC35
€308.36
These real carbon air ducts are a direct replacement for the cheap and nasty plastic ones the bike is supplied with. Fits in a few minutes and makes a dramatic improvement to the overall appearance of the bike.
TYGA no: BPCX-0018satin
SKU: hon-11444 Categories: ALL products, Bodywork and carbon, Carbon, Honda, RVF400RR NC35, ShopCarburettor tray GRP , Honda VFR400/RVF400
€90.32
The carburetors on the NC30/35 are particularly prone to heat from the engine, which in turn heats up the fuel and lowers efficiency.
The TYGA carb tray for the NC30/35 aids in keeping the heat of the engine away from the carbs, and is fully compatible with all standard components. It will also help with keeping debris away from the carbs, if the carbs are being run full open.
No special tools are required to fit the carb tray.
TYGA no: BPFX-9309
SKU: hon-10359 Categories: ALL products, High performance, High performance, High performance, Honda, RVF400RR NC35, Shop, VFR400RR NC30Set, pipe full race system stainless maggot silencer LH exit, VFR750F gen 4, 94-97
€1,107.23
Set, pipe full race system stainless maggot silencer, VFR750F gen 4, 94-97
This TYGA Full Race System has been designed with no compromises and maximum power in mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits the 1994-1997 Generation 4 VFR750.
For unsurpassed looks, sound and performance, this system can be used with a number of our 2″ slip on exhaust silencers
See also our sets with silencer included:
EXPS-0122 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Carbon/Carbon End Cap Silencer
EXPS-0123 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Stainless Silencer
EXPS-0124 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Aluminium Silencer
EXPS-0125 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Carbon Silencer
EXPS-0126 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Carbon/Carbon End Cap Silencer
EXPS-0127 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Aluminium/Carbon End Cap Silencer
EXPS-0128 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless Silencer
EXPS-0129 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless/Carbon End Cap Silencer
EXPS-0130 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97 Maggot Silencer
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing in at only 4.15 kgs (not including the silencer).
**Important Note**
The TYGA system keeps the use of the side stand, however, the centre stand and pillion foot rests must be removed prior to installation.
TYGA no: EXPS-0130
SKU: hon-11023 Categories: ALL products, Exhaust systems, Exhaust systems, Exhausts, Honda, RC36-2 -> RC30 replica products, Shop, VFR750F Gen 4, 94-97Carbon tank box cover, KTM RC125/RC200/RC390
€399.92
Tank Cover, (Carbon), KTM RC125, RC200, RC390
This component replaces the nasty plastic item, adds class to your ride and is an easy installation. Note this product consists of just the rear part of the tank cover. This product can only be ordered with battery box cover BPCX-7431B as product BPCX7431 to save on price and shipping costs.
Let your bike stand out from the crowd with this beautiful carbon fibre product.
TYGA no: BPCX-7431A
SKU: ktm-10033 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Carbon, KTM, RC 125/200, RC 390, ShopFairing set race no air duct, Aprilia RS250
€663.95
This kit comprises of the parts shown below which are also available separately.
* A clear screen is provided unless you specify tinted in the comment box at check out
This kit is supplied with all additional fasteners required to mount it to a stock Aprilia RS250 MKII
Fairing set race no air duct, Aprilia RS250
This kit comprises all the parts shown on picture, which are also available separately.
For Aprilia RS250 MK1 owners, you can use this fairing but it’s not a direct fit.
The dash is different, the digital meters (MK2) fits the TYGA frame.
Tank MK1 looks the same but is little different. The seat needs adjustment the tank is a little bigger.
The cooling- and oil tank are in the sub frame (MK1) and on the side of the frame MK2.
The steps left and right of the MK2 have extra brackets, the MK1 don’t have these. You need them to fit the lower TYGA cowling.
TYGA no: BPFS-0101
SKU: apr-10033 Categories: ALL products, Aprilia, Bodywork, Bodywork and carbon, RS250, ShopCarbon dash panels (pair), Kawaskai ZX10R 2011-13
€244.86
High quality carbon products, perfect fitment and easy to install. Gives your bike that SBK look
Lightweight carbon fibre direct replacement for Kawasaki OEM item. Predrilled for use with stock mounting hardware.
(TYGA logo is applied after clearcoat and can be eaily removed)