Sprocket holder CNC silver, Honda NSR250 MC21
€198.07
CNC machined TYGA sprocket holder for your NSR250 MC21R/SE/SP.
Designed and machined in house by TYGA, as a direct replacement for the ugly and heavy standard MC21 sprocket holder.
Crafted from aircraft spec 6061-T6 alloy, and supplied with bearing, seals and alloy (6061-T6) spacer, the sprocket holder is ready to fit.
Not only is this part a major cosmetic improvement, but it is only 60% as heavy as the OEM part. This means less unsprung mass, and also less rotational mass. The best case scenario.
TYGA no: TYLY-1043
SKU: hon-10394 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250 MC21, ShopSilencer aluminium Classic 60mm , 2 stroke stainless endcap
€76.12
Silencer, Aluminium Classic, Two Stroke, Assy.
This aluminium two stroke silencer has been designed for those owners of two stroke motorcycles looking for a more old fashioned classic look. They have similar dimensions and perform the same as our other two stroke silencers and are available with two different colour options for the exhaust exit cap and nozzle to suit the customers’ requirements.
Stainless steel pressed mounting end cap with 3 M6 threaded holes for mounting to exhaust chamber flange
Stainless steel exit end cap and long nozzle in traditional design with choice of raw stainless or black powder-coated finish
Cartridge glass wool insulation for greater longevity
Lightweight: weighs just 0.7kg
Tough anodised body finish for enhanced looks and weather resistance
Silencer is supplied with paper gasket and stainless steel bolts and washers.
“Note this product is intended to be used with our exhaust chambers (EXCS-****) and is not a direct replacement part for the stock or other manufacturers’ silencers. If you wish to install our two stroke silencers with a stock chamber, we offer a mounting flange (code TPER-0052 and TPER-0022) in either stainless or mild steel which can be welded onto the existing chamber and suitable for directly bolting our two stroke silencers to an existing non TYGA chamber. The flange is of course not required if intended to install to a TYGA chamber.”
Compatible Parts:
All Tyga Performance Two Stroke chamber sets. Remember to order enough silencers for one complete system!
Other Alternative Products:
EXSL-0002 Shorty Aluminium Classic
EXSL-9005 Aluminium Premium
EXSL-0003 Carbon
EXSL-0004 Carbon/Kevlar
EXSL-0067 Shorty Aluminium Premium
EXSL-0065 Shorty Carbon
EXSL-0066 Shorty Carbon/Kevlar
TYGA no: EXSL-0001
SKU: alg-10005 Categories: 2 stroke exhaust sets, ALL products, Aprilia, Cagiva, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Mito 125, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RD350LC 4L0, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, ShopTop triple clamp CNC silver , Honda RVF400 -> CBR600 fork
€263.52
Top Triple Clamp, CNC silver, CBR600RR forks NC35/MC21/MC28 Conversion
CNC designed and manufactured in house as a direct replacement for the standard top triple clamp. Facilitates mounting holes for securing the ignition switch holder assy TYLY-0041 for use on NSR conversion or TYLY-0042 for NC35 conversion.
Crafted from aircraft spec 6061-T6 aluminium, using high technology 3D machining, the TYGA clamp offer high strength while being lighter than the standard component, and offers an improved and individual look to your bike.
TYGA no: TYLY-0059
SKU: hon-10552 Categories: ALL products, CNC parts, Honda, Shop, Stock list, all modelsSealkit set VHM heads (2 cyl), Suzuki RGV250/Aprilia RS250
€22.24
Sealkit set VHM heads (2 cyl), Suzuki RGV250/Aprilia RS250 (alg-10189)
This set has all O rings you need for 2 cylinders
TYGA no: SK33102
SKU: alg-10189 Categories: ALL products, Aprilia, High performance, High performance, RGV250 VJ22, RS250, Shop, Suzuki, VHM productsTurn signal relay LED , 1990 Honda
€18.19
Turn Signal Relay, Replacement for Honda 1990s Type.
Electronically speed controlled flasher relay especially designed to be used with LED turn signals. This unit will flash at the correct speed regardless of the wattage of the turn signals so it can be used with stock fronts and LED rears, all LEDs or even all stock.* Easy to install, plugs and plays where the stock Honda one is installed. Re-use the stock Honda rubber sheath for mounting it.
*For some Hondas such as the MC21, NC30 and NC35, this relay works fine with 2 LED turn signals installed or with all four of the stock turn signals installed. However, if 4 LED turn signals are installed, then you need to install one of the following in the wiring harness:
TYGA no: TELC-0002
SKU: hon-10580 Categories: ALL products, CBR125R/CBR150R 2004-10, CBR125R/CBR150R 2011-, CBR250R MC19, CBR250RR MC22, CBR400RR NC23, CBR400RR NC29, CBR900RR 1992- 95, Honda, NR750, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, RVF400RR NC35, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30, VFR750R RC30, VTR1000Sp1SP2Carbon exhauststay left, Suzuki RGV 250
€29.88
Carbon Exhaust hanger stay for RGV250. This product is used to secure the left side silencer for systems with a side by side silencer. It can be used with or without the passenger footpeg assembly so it is suitable for both street and race bikes
Compatible with the following TYGA exhaust systems:
EXCS-0009
EXCS-0014
Let your bike stand out from the crowd with this beautiful carbon fibre product.
TYGA no: BPCC-0012L
SKU: suz-10004 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, RGV250 VJ22, Shop, SuzukiHandle bar set black 48mm racing, Honda NSR250 MC21/MC28
€234.92
Handlebar Set, Racing, Black, 48 mm.
Designed and machined in house from aircraft grade aluminium, suitable for:
– CBR600RR
– NSR250 with CBR600RR front fork conversion. These are lower than the stock Honda OE CBR600RR bars so they are more suited to the NSR250 which requires lower bars. (For stock NSR250 41mm front end see TYLY-0077 and TYLY-1077)
– Fits most other sports bikes with 48mm. inverted front suspension.
7 degree angle for a comfortable, yet sporty feel.
Please note that these bars may have clearance issues with components when used on street bike and are primarily sold for race use.
TYGA no: TYLY-1012
SKU: hon-10560 Categories: ALL products, CBR600RR 2007- 16, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC21, NSR250 MC28, RVF400RR NC35, Shop, VFR400RR NC30Screen, RC36-2, RC30 Style
€52.00
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: SCRE-0182
SKU: hon-11517 Categories: ALL products, Bodywork, Honda, RC36-2 -> RC30 replica products, Shop, Stocklist