Clutch lifter plate, Honda Monkey 125 2022
€26.82
Rear Fender, Carbon, stock shape, Monkey 125 2018-
Carbon direct replacement for original part. Lighter and looks way, way cooler!
IMPORTANT, Rear fender BPCH-7042 is not compatible with the Honda number
plate holder (part number 80100-KOF-T00 ) due to the weight of the Honda
part. We recommend when installing BPCH-7042 that TYGA registration holder
BPCK-7142 is installed instead
TYGA no: TYLY-0167
SKU: msx-10514 Categories: ALL products, High performance, Honda, Shop, Various partsSeat cowling right VJ21, Suzuki RGV250 VJ21
€39.40
This seat cowling is to be used in our VJ21 kit, BPFS-0121 and BPFS-0122.
This product requires panels BPFT-9021H and L. for installation.
TYGA no: BPFT-9021R
SKU: suz-10103 Categories: ALL products, Bodywork, Bodywork and carbon, RGV250 VJ21, Suzuki, Suzuki RGV250Bar end weight (pair), Honda CBR250RR MC22
€21.46
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-0322
SKU: hon-11468 Categories: 4 stroke exhaust sets, ALL products, CBR250RR MC22, Exhausts, Honda, Shop, SilencersCowling Right red, Honda MSX125 GROM
€23.09
Cowling right, OEM Honda part
TYGA no: 77215-K26-900ZDÂ
SKU: MSX-10288 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopSection Final stainless WSS300 race system, KTM RC390
€379.52
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXPT-0078
SKU: ktm-10136 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsStud, C, MC28
€2.59
Stud, C, MC28
TYGA no: 90033-KV3-830
SKU: hon-11132 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Belly Pan Race/street (GRP), WSS300 TYGA version, KTM Duke125/200/390 2017-
€215.26
Step Kit (Street), (Adjustable), KTM 390 Duke
Designed in-house by TYGA Performance using the latest CAD/CAM software, these CNC machine-made step kits are made from top quality aircraft grade aluminium. Complete with carbon heelguard on left and right hanger.
Race shift possible by reversing the gear change arm. No other modification necessary other than adjustment of the link rod.
Peg position is 25/40mm. up and 15/30mm. back*.
Brake light is operated by standard pressure switch.
Provision for the side stand is provided.
Fitting the TYGA Step Kit for the KTM 390 Duke requires that the swingarm axle be removed from the machine, which can render the vehicle unstable. Having an assistant can be very useful during removal and fitting of the axle.
Bearing Clutch, MC28
€51.88
Bearing Clutch, MC28
TYGA no: 91023-KG4-004
SKU: hon-11119 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28