O Ring, Oil Pump, MC28
€3.72
O Ring, Oil Pump, MC28
TYGA no: 91307-283-000
SKU: hon-11103 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Carbon rear fender Dax
€124.76
Rear Fender, (Carbon) Stock Shape, Honda Dax. Carbon direct replacement for original part. Lighter and looks way, way cooler!
TYGA no: BPCF-7136
SKU: MKY-002 Categories: ALL products, By model, By product, Carbon, Dax and Chaly, Honda, ShopReed valve Gasket silicone (set), Aprilia RS250/Suzuki RGV250
€21.63
Reed valve Gasket silicone (set), Aprilia RS250/Suzuki RGV250
The OEM reed blocks and manifolds have a build in rubber ring, what after 20 years isn’t perfect anymore.
We offer a simple but effective solution, no risk on damaging the engine.
And can be used multiple times.
1 engine = 1 set
Seat set street GP-T, Honda NSR250 MC18
€1,134.06
Kit, Seat Set, GRP (Street), MC18 GP-T
This set of bodywork is designed to replace the stock seat cowling with the street version of our GP-T Seat cowling and includes all parts needed to do the conversion. It is suitable for the MC18.
‘Note this kit has been designed primarily for the 1989 model but will also fit the 1988. Note that for the 1988 model, the exhaust stays are suitable for our TYGA exhaust system but not the stock exhausts. The wiring harness differs on the 1988 model so there may be some modification of the wiring harness required.’
The kit comprises parts shown below which are also available separately.
Note there are 3 MC18 GP-T seat cowling kits to choose from:
BPFS-0160 Street GRP
BPFS-0161 Race GRP
BPFS-0162 Street Carbon
TYGA no: BPFS-0160
SKU: hon-10627 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC18, ShopSub frame aluminium GP-T, Honda NSR250 MC21/MC28
€196.44
Subframe, Aluminium, NSR250 MC21/28 GP-T
This lightweight aluminium subframe weighs less than 1.2 kg and replaces the stock item when used as part of the NSR250 GP-T seat kit. Essential for mounting the seat cowl, this component is supplied with all brackets and mounting points to substitute this for the OEM Honda item. Composed of extrusions and CNC machined sections, handwelded together by craftsman, this subframe is then blasted and anodized for a tough and attractive finish. Supplied with a regulator/rectifier stay as well as cable ties for securing the wiring.
Compatible Parts:
Use with seat cowling kits
BPFS-0128, 0129, 0130, 0131, 0132, 0133, 0134, 0135 and 0136
TYGA no: TYLY-0108
SKU: hon-10458 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC21, NSR250 MC28, ShopCarb Service Kit A, 16 pieces, Honda CBR250R MC14, MC17 & MC19
€37.58
Carb Service Kit A, 16 pieces, Honda CBR250R MC14, MC17 & MC19
LiteTek Carburettor Seal Kit to suit
Honda CBR250R MC14, MC17 & MC19
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
4x FB-006 Float Bowl Ring, Material: Flourosilicone, ( Part of Honda Assembly Part No. [16010-KT7-003 or 16010-MN4-003] superseded by 16010-MN4-305)
4x OR-005 Pilot Screw O-Ring, Material: Viton 70A, ( Part of Honda Assembly Part No. [16010-KT7-003 or 16010-MN4-003] superseded by 16010-MN4-305)
4x WS-001 Pilot Screw Washer, Material: Stainless Steel
4x OR-009 Drain Screw O-Ring, Material: Viton 70A ( Part of Honda Assembly Part No. [16010-KT7-003 or 16010-MN4-003] superseded by 16010-MN4-305)
TYGA no: CKA-Honda-MC19
SKU: alg-10363 Categories: ALL products, Carburettor Service Kits,, CBR250R MC19, HondaFront fender “stock shape, Honda RS250 NX4-NX5
€55.20
Front fender stock shape, Honda RS250 NX4-NX5
Same shape as original
Compatible Parts:
All Tyga Performance and Honda OEM panels.
TYGA no: BPFF-0006
SKU: hon-10607 Categories: ALL products, Bodywork and carbon, Honda, RS250R NF5 / NX5, ShopSubframe aluminium , Honda RVF400 NC35
€493.97 €444.57
This lightweight aluminium subframe is closely modelled on the stock NC35 subframe and can be substituted for the heavy steel one with a weight saving of XXX. Made from extruded and CNC machined 6000 series aluminium, this product is hand-welded by our craftsmen to provide a strong, accurate and beautiful component. Finished in Hard wearing satin black powdercoating, it can be painted if the customer so chooses.
Note this subframe is for race and single seat use only and cannot be used for carrying a passenger. All mounting positions for exhaust stay, seat cowling, seat pad, undertray, radiator overflow bottle, electrical components etc which are normally mounted to the subframe are supplied with subframe, there are even two mounting holes in case you wish to install a remote reservoir rear shock (BPCC-0046 is a direct fit), so it is almost a simple plug and play. Most of the standard fasteners are used, however where necessary, replacements are included.
If you wish to run this subframe without the rear fender, then this is also possible and we recommend installing it along with Seat cowling bracket part number: TYLY-0224-17 and battery box TYLY-0026. In this configuration, you will need modify the rear mounts of the battery box and drill them to attach to the subframe and to cable tie, starter relay etc which are normally attached directly to the undertray
TYGA no: TYLY-0225
SKU: hon-10985 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, Shop, Various parts