Sub-frame aluminium, Suzuki RGV250 VJ21
€177.07
Subframe, Aluminium, RGV250 VJ21, Assy
This lightweight aluminium subframe replaces the heavy steel scaffolding that Suzuki saw fit to inflict on the VJ21 and is idea for a race or modified street bike. The VJ21 is a light and agile bike and it is a pity that it is encumbered with all this weight at the rear of the bike which becomes redundant once you convert to single seat. All that is really needed is a lightweight subframe to support:
The rear fender
Taillight
Attachment for the radiator surge tank.*
* The surge tank is now accessed from the inside without the need to remove the race seat cowling should any top up be required. Alternatively, an aftermarket surge tank such as this can be installed (BPAC-1002)
With a single seat cowling, access to the autolube reservoir is hindered so we simplified the subframe so:
No passenger seat support area
No passenger pegs and mounting hangers
No autolube reservoir and mounting hardware.
No exhaust silencer mounts
Note that we are in the process of making an alternative suitable autolube reservoir kit and exhaust silencer mounting stays.
This product is made in-house in TYGA and all hand fabricated and precision welded for a race inspired and lightweight product, finished in high quality satin black powercoating and Includes all mounting hardware to mount subframe and undertray. The difference in weight is 0.54kg compared to 2.1kg for the stock one, so a whopping 1.56kg lighter!
Optional products which can be used in combination with this subframe
BPSY-0276 Mudflap
TYLY-0251 Coolant Reservoir Fitting Kit
TYGA no: TYLY-0248
SKU: suz-10151 Categories: ALL products, Bodywork and carbon, RGV250 VJ21, Shop, Suzuki, Various partsSet, Pipe, Twin Exit System, High Level, MSX125 2021-, Moto Maggot
€769.95
Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-
Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.
See also BPFF-7142 for GRP version.
*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.
TYGA bike dust cover lime green/black, (race) Kawasaki
€70.19
TYGA Bike Dust Cover, Lime Green/Black, NINJA
This cover is handmade from 100% breathable polyester and ideal for an indoor dust cover. Suitable for sports bikes from 125cc to modern 1000cc. sportsbike, the cover features a pull-string around the bottom to secure it in position, comes with its own storage pouch and is machine washable.
Note, this is for indoor use only. For a weatherproof cover, see 08P34-KPP-700 Honda Bike Cover.
TYGA no: TMER-0146
SKU: alg-10396 Categories: ALL products, Bike covers, ER6N-F 2009-11, Kawasaki, Ninja 250R 2008- 12, Ninja 250R/300R 2013 -, Ninja 400R 2018-, Shop, Various parts, ZX10R 2011 -15, ZXR250C, ZXR400LHandlebar Clamp, Right, Silver, CBR250
€92.83
Replacement Right handlebar clamp for handlebar set TYLY-0669
Air duct GRP (pair), NC35
€131.81
These real carbon air ducts are a direct replacement for the cheap and nasty plastic ones the bike is supplied with. Fits in a few minutes and makes a dramatic improvement to the overall appearance of the bike.
TYGA no: BPFX-0018
SKU: hon-11417 Categories: ALL products, Bodywork and carbon, Carbon, Honda, RVF400RR NC35, ShopFront fender (grp) stock shape, Honda RS250R NXA
€80.91
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
Inner cowling (GRP) stock shape, Yamaha TZR250 3MA
€106.61
Finally available for the Yamha RD350, TYGA Performance full race exhaust.
Set, Exhaust Chamber, Side By Side Type, Stainless Steel, Yamaha RD350LC (4L0)
TYGA Performance combines modern technology and traditional techniques to bring you the best in two stroke chamber design. With the help of advance computer software, and extensive dyno and road testing, we are able to design the optimum chambers for your model motorcycle. Chamber sections are laser cut for precision, but this is where the automation ends. All chambers are hand rolled and welded by our expert craftsmen to give the level of perfection that you’d expect when purchasing a TYGA Performance exhaust system.
Due to popular demand, the TYGA RD350LC 4L0 pipes feature a crossover header design, constructed in mirror finished stainless steel for unrivaled looks.
Parts included with this product:
1 x Left side chamber, mirror finished stainless steel
1 x Right side chamber, mirror finished stainless steel
2 x Manifolds clamps ( Left and Right)
2 x Manifolds
4 x Mounting springs
1 x Shim, Side Stand
Not included are the silencers, We recommend the TYGA shorty silencers.
Please order 2 silencers of choice to complete your order:
EXSL-0067 (Aluminium)
EXSL-0065 (Carbon)
EXSL-0066 (Carbon/Kevlar)
Please note that this exhaust system requires removal of the centre stand.
TYGA no: BPFC-7052
SKU: yam-10092 Categories: 2 stroke exhaust sets, ALL products, Exhausts, Shop, TZR250 3MA, YamahaUpper Cowling, Carbon, NX5 RS250R (1995 NSR250 Style)
€855.35
Upper Cowling Race, (GRP) NX5 RS250R (1993 Style) (BPFU-9236)
The upper fairing is modelled from the first version of the NX5 which has the side air intake. We made it slightly different by smoothing the left side where there is normally a cut out near the steering damper but is otherwise stock shaped. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with lower cowling BPFL-9136.
Requires screen SCRE-0173
TYGA no: BPCU-9336
SKU: hon-10976 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, Shop