Under cowling (GRP) primer, Honda MSX125 GROM
€134.09
Under Cowl, (GRP), MSX125, primed ready for paint. Bling up your grom with this cool component. High quality mounting hardware provided and easy to install. We also offer the same product in Carbon, see BPCL-7028.
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
TYGA no: BPFL-7028
SKU: MSX-10328 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopCarbon lower cowling GP-T, Honda NSR250 MC21/MC28
€509.98
Lower Cowling (Carbon), NSR250 GP-T, Assy.
This product is designed to be used with BPCU-9033 as part of the Bodywork set BPFS-0138
Designed in-house by TYGA Perforance and using 15 years experience of developing fairings for the NSR250, this fairing is lightest and most stylish yet. The design allows for the extra width of an HRC radiator while at the same gives maximum clearance with the track at high angles of lean. Other features include a vent underneath and high quality lamination by our skilled craftsmen. Weight is under 1 kg but strength retained using high strength epoxy resins and good design. Also available in GRP, see BPFL-9033
It is supplied with spacers to place between fairing and rear lower mounts to ensure clearance with exhaust chambers.
Compatible products:
This product must be used with BPCU-9033
This lower cowling is designed to be used with stock or race exhaust systems though some spacing may be necessary to get clearance with chambers:
1. stock systems, fit with no spacing but will need a small part of the indent on the lower vent removed to clear the chamber. We can modify the lower to fit the stock chambers if requested
2. Tyga chambers require some spacing but no cutting. On some systems (particularly MC28) no spacing is necessary
3. Other systems, can not advise, but should require only spacing or possibly cutting of front of lower where front cylinder header exits.
TYGA no: BPCL-9033
SKU: hon-10541 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, NSR250 MC21, NSR250 MC28, ShopFork gear shift no.2, RGV250/RS250
€82.24
VHM insert, Aprilia RS125 (alg-10176)
piston height -0.35 mm, squish 0.90 mm. Most used is 12,0 cc.
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
Vertex Piston race set single ring, Suzuki RGV250 / Aprilia RS250
€117.66
One kit per cylinder, order two kits per engine.
Light weight combined with high strength makes this the piston of choice for owners seeking high performance.
The kit comes complete with a 1mm ring, piston pin and a pair of cir clips.
Available in 4 sizes:
A=55.94mm
B=55.95mm.
C=55.96mm
D=55.97mm
TYGA no: 2800SU56 (ABCD)
SKU: alg-10101 Categories: ALL products, Aprilia, High performance, High performance, High performance, RGV250 VJ22, RS250, Shop, SuzukiCarbon dash cover, Yamaha V-max
€134.12
Weight approx. 0.09 kg. This is a simple replacement part for the stock item. Fits in minutes.
VHM Cyl. Headset Kawasaki KX250 ‘2005 -08
€327.95 €284.25
VHM Cyl. Headset Kawasaki KX250 2005 -08 (alg-10219) AA33075
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website.
VHM produces exchangeable cylinder heads for two-stroke engines in motocross and road racing. With the experience gained in two-stroke tuning, VHM develops products of high quality.
During intensive tests, on the racetrack as on the VHM dyno, the cylinder head showed a better temperature development in the cylinder head. A lower engine temperature followed. The explanation of this phenomenon is the use of a special aluminum alloy which has a very good heat transference. Another advantage of the material is its resistance to detonation.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design
This head set comes with following parts:
1x cylinder head
1x standard insert (20.60cc)
Optional inserts:
– blind
– 20.20
– 21.00
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Note: please put in comment box, the year of your bike and what size insert you want (no comment is STD insert).
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
TYGA no: AA33075
SKU: alg-10219 Categories: ALL products, Kawasaki, Kawasaki MX, Motocross, Shop, VHM productsRod M6 leftd.
€14.78
Replacement rod end joint for your TYGA Step Kit.
M6 LH F. Rod End SILBP6S
TYGA no: STRE-1006
SKU: alg-10039 Categories: ALL products, By model, CNC parts, Kawasaki, Ninja 400R 2018-, ShopUpper cowling race, Suzuki RGV 250 Tyga, assy
€224.26
This upper cowling is to be used in our VJ22 kit BPFS-0061.
This product is compatible with lower cowling BPFL-0026. Will not fit stock Suzuki lower cowling
TYGA no: BPFU-9126Â
SKU: suz-10073 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, RGV250 VJ22, Shop, Suzuki