Exhaust Chamber, Right, GP Type, Stainless Steel, RGV250, VJ22
€281.46
Bare replacement right side chamber for chamber set EXCS-0010R
Carbon cover, temp Gauge 64mm, Honda
€25.10
Carbon cover, temp Gauge 64mm, Honda
This cover fits snuggly over the original plastic Honda gauge cover and adds a sporty appearance. It is also ideal for hiding any ugly scratches or dents that may have occurred over the years. Fits in second and can be held in place with a dab of glue or silicone adhesive.
This product is suitable for the following models:
MC18 NSR250
NC30 VFR400R
RC30 VFR750R
Also available as a complete set with speedo,temp gauge and rev counter, see BPCC-0027
This product might also fit other models.
TYGA no: BPCC-0024
SKU: hon-10609 Categories: ALL products, Carbon, CBR400RR NC23, Honda, NSR250 MC18, Shop, Various parts, Various parts, VFR400RR NC30Set full race system under belly with short stainless silencer with carbon cap, Honda Monkey 125 2018-
€480.85
Set, Pipe, Full System, Underbelly, Monkey 125, Stainless Oval/Carbon End Cap, Short
This full race system has been specifically designed for the Monkey 125 to maximise power. Made in stainless steel with spring mounted carbon silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too! (A dB killer is included).
Note that once the stock system has been removed from the Monkey, there is an empty space under the seat on the right side. We recommend installing TYGA Performance product BPCC-7142R which has been designed to mirror the left side cover. This will fill in the gap under the seat and complete the transformation. Refer to photos of the exhaust installed for more details.
See also set with the Carbon Side Cover Included : EXPS-0108
Performance and Dynograph
The blue trace shows the 100% standard Honda Monkey 125, compared to the red trace, which is after installing the TYGA Full System set (EXPS-0110) with no other changes to the stock bike.
A useful increase in peak power and further gains could probably be had with remapping etc.
Similar Products:
EXPS-0110 Stainless, Underbelly, with short silencer
EXPS-0107 Stainless, Underbelly with long Silencer and Carbon side Cover
EXPS-0108 Stainless, Underbelly with short Silencer and Carbon side Cover
Triple Clamp Set, 3D, CNC Silver, CBR600RR Forks to fit CBR250RR MC22
€673.59
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-3309
SKU: hon-11260 Categories: 4 stroke exhaust sets, ALL products, CBR250RR MC22, Exhausts, Honda, Shop, SilencersBreather cap, aluminium CNC, Honda RC30/NC30/MC18
€35.12
Upper cowling “stock”, Honda VFR750 RC30 (hon-10569)
Direct replacement for OEM Honda lower cowling with headlight and indicator holes filled in. Due to being constructed with strong flexible epoxy resin, it is thinner and therefore about 65% the weight of the stock upper cowling. In every other way, the same as stock. Can be used with TYGA Performance or factory Honda RC30 lower cowlings.
TYGA no: TPER-0112
SKU: hon-11446 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250 MC18, RC36-2 -> RC30 replica products, Shop, Stocklist, Various parts, Various parts, VFR400RR NC30, VFR750R RC30*** NEW *** Carbon rear hugger, Yamaha V-max
€236.91 €189.53
Weight approx. 0.48 kg. This item replaces the heavy steel cover. It is supplied with mounting cups for frame rubbers and rear mount for latch mechanism. Fits in minutes.
TYGA no: BPCX-7119
SKU: yam-10030-1 Categories: ALL products, Carbon, Second chance bargains, Shop, V-Max 1985 - 2007, YamahaCarbon Headlight cover front, MSX125 2021
€178.27
Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-
Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.
See also BPFF-7142 for GRP version.
*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.
TYGA no: BPCX-7548
SKU: msx-10510 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2021-, ShopUpper cowling race left, Ninja 400
€152.01
Upper Cowling, Right, (Race GRP), Ninja 400
Replacment Left upper Cowling for TYGA Race Bodywork kit BPFS-0175
TYGA no: BPFU-7040R
SKU: kaw-10142 Categories: ALL products, Bodywork and carbon, Kawasaki, Ninja 400R 2018-