Pillion seat cover “carbon”, KTM RC390 2022 –
€177.68
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: BPCX-7731
SKU: ktm-10209 Categories: ALL products, Bodywork and carbon, Exhausts, KTM, RC390 2022-, Stock list, all modelsCarbon dash TYGA,, Aprilia RS250
€33.12
This carbon dash is made specifically for the TYGA bodywork kits (BPFS-0100 and BPFS-0101). Adds finishing touch to the fairing and hides wiring harness
Not suitable for the stock bodywork, see BPCX-9330.
TYGA no: BPCX-9230
SKU: apr-10074 Categories: ALL products, Aprilia, Bodykit replacement parts, Carbon, RS250, ShopSeat set race GP-T, Honda VFR400 NC35
€927.76
The ultimate seat set for your V4 Honda!
This modern fairing, designed in-house by TYGA Performance, is the culmination of 15 years of experience developing bodywork for the NC35. As well as bringing the NC35 up to date, it also offers huge weight saving and easy fitment and removal. The seating position is higher and roomier compared to the stock NC30 postition, bringing it into line with modern sports bikes ergonomics. The seat pad is designed to give plenty of feedback for race use and the cowling has plenty of space for tucking in behind the fairing along the straights. The seat cowling is designed so that the fuel tank can be removed while leaving the seat cowling installed, allowing for quick jetting changes etc.
The kit is supplied with all mounting hardware including subframe and battery box.
Like all our fairings, this product uses only the best epoxy resins and high quality fabrics to give a strong, light and flexible panel. All our products are hand made by our skilled craftsmen and are built to a very high standard.
** We recommend trial fitting and making and minor adjustments before painting
TYGA no: BPFS-0166
SKU: hon-10633 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35Sidehanger left, Aprilia RS250 (Tyga)
€68.51
Replacement left hanger for your Aprilia RS-250 TYGA Step Kit. Complete with mounting hardware and bushes.
TYGA no: Stah-0009
SKU: apr-10031 Categories: ALL products, Aprilia, CNC parts, CNC parts, RS250, ShopRubber molding, fuel tank
€8.18
Seat Cowling, (GRP), NC30/NC35 GP-T
This product is the latest TYGA design for the 400 V4 and is designed to be stylish and lightweight. This product includes ONLY the seat cowling for replacement in the event of an accident or can be used for a project bike of another model. For the MC21, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessay parts to complete the modification. For installation of any other model the customer will need to make the necessary modifications,
BPFS-0148 (GRP, NC30)
BPFS-0149 (GRP, NC35)
BPFS-0150 (Carbon, NC30)
BPFS-0151 (Carbon, NC35)
The advantages of this seat cowling over stock include:
– use with rest of seat cowling kit, much lighter than stock
– new design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9133).
– higher at the rear, to give the bike a more agressive stance
– better rider control by use of enclosed seat area
– improved strength with precision in design and fitment
Tyga Performance Compatible Parts for this Product:
This product is compatible with:
BPFX-9034 and BPCX-9134 Undertray, NC30/NC35 GP-T
TYLY-0133 Subframe, NC30/NC35 GP-T
TYLY-0130 Batterybox NC30/35 GP-T
BPFX-9234 Seat Support, NC30/NC35 GP-T
BPSP-0006 Seat Pad, GP-T
BPAC-0001 Rear Brake Reservoir Kit,
BPLT-0009 LED Taillight
BPFX-9133 Registration Plate Holder GP-T
TYGA no: 64105-KV3-505
SKU: hon-11319 Categories: ALL products, Bodywork, CBR400RR NC23, CBR400RR NC29, CBR900RR 1992- 95, RVF400RR NC35, Various parts, Various parts, VFR400RR NC30, VFR750R RC30Powervalve cover Black, Suzuki RG125
€60.74
set ( 4 pieces), complete CNC billet aluminium powervalves, RGV250/RS250 (alg-10123)
This set of Power valves is the latest version, and can be used for your Suzuki RGV250 or Aprilia RS250. Fully tested on Dyno and used on track and street bikes.
The set is made of CNC billet aluminium and is special coated.
No more problems with the “power valve pin” and having to buy new ones every 15.000 km.
And the risk that a broken power valve will ruin your engine!!
Now available for an unbeatable price, and FREE SHIPPING all over Europe.
TYGA no: TYLY-6039
SKU: alg-10438 Categories: ALL products, High performance, RG125, Shop, Suzuki Tags: and can be used for your Suzuki RGV250 or Aprilia RS250. Fully tested on Dyno and used on track and street bikes., And the risk that a broken power valve will ruin your engine!!, Best available in the market., No more problems with the “power valve pin” and having to buy new ones every 15.000 km., The set is made of CNC billet aluminium and is special coated., This set of Power valves is the latest versionTop Triple clamp CNC silver , Suzuki RGV 250 VJ22 kit
€257.32
CNC machined top triple clamp with detachable ignition switch/lock holder for your RGV250 VJ22.
Designed and machined in house by TYGA, as a direct replacement for the OEM top triple clamp. FEA tested and developed for increased strength without unnecessarily increased weight.
Crafted from aircraft spec 6061-T6 alloy, the top triple clamp is ready to fit.
The detachable ignition switch/lock holder is positioned to allow use of the steering lock, but can be removed for race use.
TYGA no: TYLY-0046
SKU: suz-10055 Categories: ALL products, CNC parts, CNC parts, RGV250 VJ22, Shop, SuzukiFront fender (GRP) primer, Honda Grom 1st + 2nd gen.
€96.78
Front Fender, (GRP), Monster Style, MSX125, Unpainted. This is apart made in fiberglass (GRP) which has been primed in PU. Some minor preperation is required prior to paint.
Please also see our carbon versions BPCF-7128g and BPCF-7128f
TYGA no: BPFF-9128
SKU: MSX-10356 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Honda, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020, Shop