Racing step kit CNC silver, Honda NSR150
€330.17
TYGA Performance racing step kit assembly. Designed in-house by TYGA Performance using AutoCAD software, these CNC machine- made step kits are made from top quality, aircraft grade aluminium. Features levers moving on ball bearings to give precise and smooth movement, and comes complete, ready to bolt on with stainless steel fasteners. One of the many advantages over the standard footrest assembly is the ability to reverse the shift pattern without removal of the side stand, so giving the ‘racer’ set-up, on the street. Kit includes gear selector link rod.
Now includes rear brake light switch provision.
TYGA no: STAA-0001
SKU: hon-10281 Categories: ALL products, CNC parts, CNC parts, Honda, NSR150SP, ShopHandle bar set racing “hinge type” black, KTM RC125/RC200/RC390 2014- 21
€247.11
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: TYLY-1631
SKU: ktm-10218 Categories: ALL products, CNC parts, CNC parts, Exhausts, KTM, RC 125/200, RC 390, Stock list, all modelsKick start plug, NSR250 MC18/MC21/MC28
€9.34
Blanks off kickstart assembly hole when kickstater has been rremoved for racing. Secure with liquid gasket such as Three Bond 1104.
TYGA no: TYLY-0013
SKU: hon-10392 Categories: ALL products, High performance, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, Shop, Various parts, Various parts, Various partsNGK sparkplug R7282-10, short
€58.94
NGK sparkplug R7282-10, “short” (alg-10227)
The short version of the R7376 plugs if clearance is a problem. NOTE: NGK TRS1225 cap required.
Extreme Long Life Laser Iridium Plug, 14mm Thread, 19mm (3/4″) Reach, 13/16″ (20.6mm) Hex Size, Gasket Seat, Resistor, Solid Terminal, Iridium Tipped Fine Wire Center Electrode and Platinum Tipped Ground Electrode, .020″ (0.508mm) Gap.
NGK’s Standard Plugs are Constructed for Longer Life and Optimum Performance.
TYGA no: R7282-10
SKU: alg-10227 Categories: ALL products, Aprilia, High performance, High performance, High performance, High performance, High performance, High performance, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, RGV250 VJ21, RGV250 VJ22, RS250, Shop, Suzuki, Various partsCDI Zeeltronic VJ23 + PC Programming Cable
€453.72
Hi-Flo Snorkel, Air Box, RGV250 VJ23
This Hi-Flo Snorkel is dyno developed in-house by TYGA Performance to eliminate the restriction of the standard VJ23 air box snorkel.
The RGV250 VJ23 has it’s true potential restricted in three main areas; Exhausts, CDI and of course the standard air box snorkel.
While just replacing the snorkel will obviously have a small benefit, it is best used in conjunction with our other VJ23 power up parts.
Available in Black/Red and All Black please choose your preferred colour in the options below.
Please see TPER-0082 for all the parts you need to build the ultimate VJ23 street weapon!
This is a 3D printed product using tough and durable materials. Some surface imperfections may be visible, but this in no way affects the fit or performance of the product.
We have 2 color option, Red/black and all black.
please specify in comment box at checkout what color you want.
Tube fuel strainer, VFR750 RC36-2 OEM part
€14.46
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: 16956-MT4-000
SKU: hon-11460 Categories: ALL products, Honda, RC36-2 -> RC30 replica products, Shop, StocklistCarbon rear hugger/chain guard, Kawasaki ZXR250 2008- 12
€331.09
Rear Hugger/Chain Guard (Carbon), Ninja 250R
Ideal for keeping road dirt and rain away from the rear shock and underside of your Ninja. Styled to look in keeping with the design of the bike. Easy to install.
TYGA no: BPCH-7016
SKU: kaw-10046 Categories: ALL products, Carbon, Kawasaki, Ninja 250R 2008- 12, ShopExhaust stay right (tyga), Honda NSR250 MC21 – MC28
€59.59
Due to requests from customers with MC21 and MC28s wanting more support of the Tyga exhaust system when used withGP Race Tail kits, we now have this product designed to be retro fitted with our GP Race Tail kits:
BPFS-0003, BPFS-0004, BPFS-0005, BPFS-0006, BPFS-45, BPFS-0046, BPFS-0059 and BPFS-0060
The stay is provide with bushes, nuts and bolts to mount to the subframe. Note, you will need to drill the subframe TYY-0007 to install this stay and some adjustment of the seat cowling may be required.
Please note this product is ‘handed’ and you need one of each TYLY-0100L (Left) and TYLY-0100R (Right) for one bike.
TYGA no: TYLY-1100R
SKU: hon-10375 Categories: ALL products, Bodykit replacement parts, Bodywork, Exhausts, Exhausts, Honda, NSR250 MC21, NSR250 MC28, Shop