Front brake reservoir cover Bikers, Honda MSX125 GROM
€30.36
Front Brake Reservior Cover, BLACK, Bikers. Fits MSX125 Grom, and 2011-2013 CBR250R
Light weight and good looking. Anodised for a long lasting finish. available in a variety of other colours. See photos.
TYGA no: Â H134-A8Z1-0195BLACK-
SKU: msx-10170- Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020Carbon race airbox lid, Honda NSR250 MC21/MC28
€210.89
The stock airbox is restricted by the size of the inlet holes on the lid which limits the amountof power that can be unleashed from the NSR250. By replacing the stock airbox lid with the TYGA Performance version, the inlet to the airbox is more than doubled in size and the flow improved by having one large trumpet.
This product is a direct replacement for the stock one and uses all the stock hardware. It even has an ‘O’ ring groove so by removal and re-use of the stock airbox lid ‘O’ ring, a perfect seal with the airbox can be retained. A mesh is supplied in the airbox to hold the stock air filter securely in position.
As well as potential power improvements over the stock airbox, there is no denying it certainly looks a lot more trick than the Honda one too!
TYGA no: BPCX-9010
SKU: hon-10323 Categories: ALL products, Carbon, High performance, High performance, Honda, NSR250 MC21, NSR250 MC28, ShopSection Final shorty stainless, Honda Monkey 125 2018-
€109.84
Set, Full System, Monkey 125 (No Silencer)
Can be used with TYGA Moto Maggot Silencer EXSL-8213(p)
See also EXPS-0104 For complete set
Replacement Silencer, Full System, Stainless/Carbon End Cap, Yamaha R25/R3
€334.06
Replacement Silencer, Full System, Stainless/Carbon End Cap, Yamaha R25/R3
Used with EXPS-0072.
Set exhaust Gp style stainless steel, Honda NSR250 MC28
€769.95
Set exhausts side by side stainless steel, Honda NSR250 MC28
The ultimate exhaust set for your NSR250, beauty and performance!
Constructed in stainless steel, TYGA Performance combine modern technology and traditional techniques to bring you the best in two stroke chamber design. With the help of advance computer software, and extensive dyno and track testing, we are able to design the optimum chambers for your model motorcycle. Chamber sections are laser cut but this is where the automation ends. All chambers are hand rolled and welded by expert craftsmen to give the level of perfection that you’d expect when purchasing a TYGA Performance exhaust system.
For more information on how to get the best power out of this system, combine it with other parts of our MC28 Power Up Kit (see under ‘technicical help’) to give your bike a massive power increase. In addition to performance, the chambers will enhance the bike’s appearance and save weight too. There is no need to compromise with fit either. The chambers are designed to give clearance to the swing arm and stock footpeg hangers as well as work with our Tyga Performance step kit STAA-0002. The stock bodywork does not need to be cut, (though repositioning of rear lower cowling down by 25mm is recommended)
NEW! Our latest design, is provided with silencer clamping hardware which mounts directly to the stock right side MC28 silencer stay for a more secure and firm installation.
By selecting stainless steel for longevity and beauty, TYGA systems offer ubeatable value.
Please note this product fits MC28 only. For MC21, please select EXCS-0006A
This product, EXCS-0006B, has both chambers exiting on the right.
Parts included with this product:
1 x left side chamber, GP (right exiting) stainless steel
1 x right side chamber, (right exiting) stainless steel
1 x silencer double clamp and mounting bolt, washers and nut
2 x manifolds
2 x mounting flanges
4 x mounting springs
Not included are the silencers.
Important! To complete your Tyga exhaust system remember to order 2 silencers with every chamber set
TYGA no: EXCS-0006b
SKU: hon-10605 Categories: 2 stroke exhaust sets, ALL products, By model, Exhausts, Exhausts, Honda, NSR250 MC28, ShopFiller cap and seat set, flush fitting, HRC type
€46.27
Filler Cap and Seal Set, Flush Fitting, HRC Type
TYGA version (reproduction) of HRC part number: 17521-NX4-680 and seal 17515-NX5-770. See schematic for details.
Consists of CNC machined filler cap and seal to fit TYGA Carbon tanks BPCG-002, BPCG-0003 and HRC fuel tanks such as NX4, NX5, NXA, NX7 etc.
TYGA no: TYLY-0180
SKU: hon-10961 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopCarbon front fender, Honda CBR600 2003-4
€209.57
Carbon direct replacement for OEM Honda item. Pre drilled for easy fitting.
TYGA Performance aftermarket parts are of high quality and let your bike stand out from the crowd.
Kitaco I-Map “plug and play”, Honda MSX125 GROM
€158.99
KITACO i-Map Fuel Injection Controller
“plug and play” type for wire splice type check product msx-10309
Developed for the Honda MSX125 Grom, giving many choices of fuelling to suit different camshafts, exhausts and big bore engines. And a combination of these upgrades.
The different maps are selected by using DIP switches. Available setting are printed on the unit.
There is also the option of a custom map. However, this requires the use of the KITACO PC-USB Interface Cable (available separately).
I-Map Fuel injection controller Kitaco voor Honda MSX / Grom 125.
Pre Installation of 3 Maps.
Remove the Limiter by fuel injection Cut features.
– Map 1 : Rpm limiter at 11000rpm, for stock engine
– Map 2 : Rpm limiter at 12000rpm, for stock engine with aftermarket exhaust
– Map 3 : Rpm limiter at 12000rpm, for 133cc bore up kit and aftermarket exhaust
– Map 4 : Full tunnable map with option USB controller and free Kitaco software. When delivered it is genuine map.
Fit on CE and US models
TYGA no: 763-1432110
SKU: msx-10469 Categories: ALL products, High performance, High performance, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, Shop