Athena gasket kit complete set, Suzuki RGV250 / Aprilia RS250
€59.00
Athena gasket kit complete set, Suzuki RGV250 / Aprilia RS250 (alg-10098)
TYGA no: P400510850255
SKU: alg-10098 Categories: ALL products, Aprilia, High performance, High performance, RGV250 VJ22, RS250, Shop, SuzukiMirror blanking plate black, Honda VTR1000 SP2
€39.50
Handy mirror blanking plates for your VTR1000 SP2.
No need for ugly cable ties on those all important track days. These CNC machined blanks will secure your cowling and keep you looking stylish.
Mounting pitch is 40mm, so will fit many models.
2x Mirror Blanking plates and 4x stainless bolts are supplied, but you can use your standard mirror mounting nuts to secure.
Kit, Fairing Set (GRP), Honda NX5 RS250R (ram air)
€908.45
Kit, Fairing Set (GRP), Honda NX5 RS250R
Complete Bodywork kit which consists of the following products:
Upper Cowling Race, (GRP) NX5 RS250R (BPFU-9036)
The upper fairing is modelled off the last version of the NX5 RS250R but will fit any NX5 which has the ram air through the fuel tank system. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with lower cowling BPFL-9036.
Lower Cowling, (GRP) NX5 RS250R (BPFL-9036)
The lower fairing is modelled off the ram air version of the NX5 RS250R but will fit any NX5 which uses a stock upper as far as we can tell. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with upper cowling BPFU-9036
Seat Cowling Race (GRP) NX5 RS250R (BPFT-9036)
Although the late model stock shape NX5 RS250R works well, to our eyes it is a bit lacking in lines and we prefer the 1995 factory NSR racer look as ridden by Ukawa and Okada. We therefore decided to make a similar style seat cowling which would be a direct fit for the NX5. The seat uses a lightweight aluminium stay to relocate the rear mounting bolts from the sides to the seat pad area and is covered underneath for streamlining and protection of the PGM and connectors. It is easy to install and being made from high quality epoxy resins and top quality glass fabric is strong and crash resistant.
Seat Stay NX5 RS250R (BPSY-0213)
Screen Clear NX5 RS250R (SCRE-0168)
TYGA no: BPFS-0172
SKU: hon-10904 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopSet pipe, Full race with oval carbon silencer NEW, Kawasaki ZXR250 2013 –
€769.95
2013-2017, Set, Pipe, Full Race System, Ninja 250R, Carbon Oval Silencer
We have a new and improved design to give you the edge in this highly competitive class. Through our continuous R&D, we have enhanced the dimensions of components to squeeze even more power from the Ninja 250 when used with the TYGA system*. Made in stainless steel with spring mounted Carbon Oval silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! Unlike the stock system and most other aftermarket full systems, the TYGA Performance full race system is routed up the right side of the bike for the best possible gas flow and the performance figures support this. Please see below.
(* May not comply with noise regulations for some states and territories and may exceed noise regulations for some circuits)
This system is supplied with an Carbon oval silencer EXSL-0043
Note, this exhaust system is not suitable for the 2008-12 model. For the 2008-12 model, please see EXPS-0015.
* Please also note that all TYGA-Performance pipe sections and silencers are new for 2017 and thus not compatible with previous 2013-2016 TYGA-Performance Ninja 250 Exhaust pipe sections and silencers.
TYGA no: EXPS-0078
SKU: kaw-10061 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R/300R 2013 -Upper cowling race, Suzuki RGV 250 Tyga, assy
€224.26
This upper cowling is to be used in our VJ22 kit BPFS-0061.
This product is compatible with lower cowling BPFL-0026. Will not fit stock Suzuki lower cowling
TYGA no: BPFU-9126Â
SKU: suz-10073 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, RGV250 VJ22, Shop, SuzukiExhaust bracket, Honda RS250R NX5
€13.68
Exhaust bracket, Honda RS250R NX5
TYGA no: BPSY-0214
SKU: hon-10900 Categories: ALL products, CNC parts, Exhaust, Honda, RS250R NF5 / NX5, ShopUndertray race carbon GP-T, Honda NSR250 MC21/MC28
€150.60
Undertray, Race, (Carbon), NSR250 GP-T
This product is to be used with BPFT-9033, BPFT-9133, BPCT-9033 and BPCT-9133 seat cowlings
Also to be used with BPFX-9133 Registration Plate Holder GP-T.
Note the following products are all compatible with the above seat cowlings and are interchangable between the MC21 and MC28
BPFX-9033 Undertray Street GRP
BPCX-9033 Undertray Street Carbon
BPFX-9333 Undertray Race GRP
BPCX-9333 Undertray Race Carbon
TYGA no: BPCX-9333Â
SKU: hon-10466 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, NSR250 MC28, ShopMount stay, VFR750F gen 4, 94-97
€14.94
Mount stay, VFR750F gen 4, 94-97
Mount stay, VFR750F used on:
EXPS-0119 Set, Pipe, Full Race System, VFR750F, Gen 4, ’94-‘9, (No Silencer)
EXPS-0122 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Carbon/Carbon End Cap Silencer
EXPS-0123 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Stainless Silencer
EXPS-0124 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Aluminium Silencer
EXPS-0125 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Carbon Silencer
EXPS-0126 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Carbon/Carbon End Cap Silencer
EXPS-0127 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Aluminium/Carbon End Cap Silencer
EXPS-0128 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless Silencer
EXPS-0129 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless/Carbon End Cap Silencer
EXPS-0130 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97 Maggot Silencer
TYGA no: EXMS-0119
SKU: hon-11032 Categories: ALL products, exhaust system replacement parts, Exhausts, Honda, Shop, VFR750F Gen 4, 94-97