Triple clamp set CNC Silver, Honda VFR400
€673.59
CNC machined TYGA triple clamp set for your VFR400R/NC30.
These stylish, all aluminium triple clamps are a direct replacement for theVFR400R/NC30, and with the help of FEA testing not only do they look fantastic, but they perform!
They are delivered ready to fit with all bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-0244
SKU: hon-10621 Categories: ALL products, CNC parts, CNC parts, Honda, Shop, VFR400RR NC30Seat set street RC211V, NC30
€637.59
This set of bodywork is designed to replace the stock NC30 seat cowling with the street version of our New Style RC211V style seat cowling and includes all parts needed to do the conversion. This product has a roomier riding position and enhanced modern looks over the stock seat cowling.
This product is suitable for the NC35 and is the base version without carbon fiber front section to keep the cost to a minimum. We also offer a deluxe version of the same product with carbon front section for enhanced looks and strength as well as a pure race one without the tailight or registration/license plate holder. See:
BPFS-0027 (street carbon)
BPFS-0028 (race GRP)
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
Take a look at our Project bikes page, to see the actual product on a bike or just to get some ideas.
TYGA no: BPFS-0034
SKU: hon-10068 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, Shop, VFR400RR NC30Tankcover race front RVF, NC35
€49.73
This tank cover replaces the stock one and blanks off the air duct holes. Designed to be used with our RC211V style upper cowlings, this product can also be used with stock bodywork with no air ducts if required
TYGA no: BPFX-9001
SKU: hon-10141 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, ShopTriple Clamp Set, CNC, Silver 3D Top Triple Clamp, Black Lower Clamp, NC35 RVF400
€673.59
CNC machined TYGA triple clamp set for your NSR250 MC28.
These stylish, all aluminium triple clamps are a direct replacement for the MC28 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!
They are delivered ready to fit with all necessary bearings and bottom seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ key holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-3312
SKU: hon-11265 Categories: ALL products, CNC parts, CNC parts, Honda, RVF400RR NC35, Stock list, all modelsCarbon fuel tank, Honda NSR250 MC21
€1,444.49
Fuel Tank, Carbon, NSR250, MC21
Top quality reproduction of the steel MC21 fuel tank in carbon fiber. This product is a direct replacement for the stock MC21 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: BPCG-0004
SKU: hon-11194 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, NSR250 MC21, ShopUpper Cowling, Carbon, NX5 RS250R (1995 NSR250 Style)
€855.35
Upper Cowling Race, (GRP) NX5 RS250R (1993 Style) (BPFU-9236)
The upper fairing is modelled from the first version of the NX5 which has the side air intake. We made it slightly different by smoothing the left side where there is normally a cut out near the steering damper but is otherwise stock shaped. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with lower cowling BPFL-9136.
Requires screen SCRE-0173
TYGA no: BPCU-9336
SKU: hon-10976 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopUndertray race GRP GP-T, Honda NSR250 MC21/MC28
€75.27
Undertray, Race, (GRP), NSR250 GP-T
This product is to be used with BPFT-9033, BPFT-9133, BPCT-9033 and BPCT-9133 seat cowlings
Also to be used with BPFX-9133 Registration Plate Holder GP-T.
Note the following products are all compatible with the above seat cowlings and are interchangable between the MC21 and MC28
BPFX-9033 Undertray Street GRP
BPCX-9033 Undertray Street Carbon
BPFX-9333 Undertray Race GRP
BPCX-9333 Undertray Race Carbon
TYGA no: BPFX-9333
SKU: hon-10467 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork and carbon, Bodywork and carbon, NSR250 MC21, NSR250 MC28, ShopGasket exhaust, Honda VFR400 NC30 / RVF400 NC35
€3.92
Compatible with:
With NC30/35 exhaust systems including TYGA systems (included in set EXPS-****). Suitable for most Honda four stroke systems.
TYGA no: 18291-MN5-650
SKU: hon-10503 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Honda, RVF400RR NC35, Shop, Various parts, various parts, Various parts, VFR400RR NC30, VFR750F Gen 3 90-93, VFR750F Gen 4, 94-97